Batch Stirred Tank Reactor (Stand Alone) | ReaktiLabX - 18
Product Overview
The Batch Stirred Tank Reactor (Stand Alone) ReaktiLabX - 18 operates as a self-contained unit for studying batch reactor behavior. This Batch Stirred Tank Reactor (Stand Alone) features a glass reactor with adjustable volume from 1500 to 1950mL, three stirrers, and a stainless steel chambered bottom for isothermal heat exchange. It preheats reactants before delivery and tracks conversion using a combined conductivity and temperature sensor. Optional DAQ software enables measurement and calculation of results.
Technical Specifications
Batch Stirred Tank Reactor (Stand Alone) ReaktiLabX - 18 â Technical Specifications
| Specification | Detail |
|---|---|
| Operation Mode | Complete self-contained batch type stirred tank reactor to operate standalone |
| Reactor | With stirrer |
| Chambered Bottom | Made of stainless steel as heat exchanger |
| Sensor | For measuring the conductivity and temperature |
| Temperature Control | In the reactor |
Technical Data
Reactor
| Parameter | Value |
|---|---|
| Outer diameter | 110mm |
| Inside diameter | 100mm |
| Height | 250mm |
| Adjustable volume | 1500~1950mL |
| Material | Boro 3.3 glass |
Stirrer
| Parameter | Value |
|---|---|
| Speed | approx. 300minâťÂš |
| Quantity | 3 |
Peristaltic Pump for Reactants
| Parameter | Value |
|---|---|
| Quantity | 2 |
| Max. flow rate | approx. 500mL/min |
Peristaltic Pump for Products
| Parameter | Value |
|---|---|
| Max. flow rate | approx. 500mL/min |
Water Pump
| Parameter | Value |
|---|---|
| Max. flow rate | 10L/min |
| Max. head | 10m |
| Power consumption | 120W |
Heater
| Parameter | Value |
|---|---|
| Power consumption | 3000W |
Tanks
| Parameter | Value |
|---|---|
| Reactants | 2x 3L |
| Product | 5L |
| Heating water | 8L |
Measuring Ranges
| Parameter | Value |
|---|---|
| Conductivity | 0~200mS/cm |
| Temperature | 0~60°C |
Key Features
Key Features
- Reactor Dimensions: 110mm outer diameter, 100mm inside diameter, 250mm height, boro 3.3 glass
- Adjustable Volume: 1500~1950mL
- Stirrers: 3, approx. 300minâťÂš speed
- Reactant Pumps: 2 peristaltic pumps, approx. 500mL/min max. flow rate each
- Product Pump: peristaltic, approx. 500mL/min max. flow rate
- Water Pump: 10L/min max. flow, 10m max. head, 120W power consumption
- Heater: 3000W power consumption
- Tanks: 2x 3L reactant tanks, 5L product tank, 8L heating water tank
- Chambered Bottom: stainless steel, functions as heat exchanger for isothermal operation
- Self-Contained Design: built-in pumps, tanks, and heating circuit make this Batch Stirred Tank Reactor (Stand Alone) fully independent
Experiments
- Fundamentals of a saponification reaction
- Determination of reaction rate constant
- Determination of temperature dependence of reaction rate constant
- Conversion depending on: reaction time, temperature, concentration
Construction and Design
The Batch Stirred Tank Reactor (Stand Alone) ReaktiLabX - 18 uses a reactor 110mm in outer diameter, 100mm in inside diameter, 250mm in height, made of boro 3.3 glass, with an adjustable volume of 1500 to 1950mL. Three stirrers, operating at approximately 300minâťÂš, ensure a homogenous mixture and extend reactant contact time. The reactor's chambered bottom, made of stainless steel, acts as a heat exchanger for isothermal operation, studying temperature effects on the reaction. The reactor is secured to the unit using two pins and connects via quick-release connections. Two peristaltic pumps, each with a maximum flow rate of approximately 500mL/min, deliver reactants, while a separate peristaltic pump handles product delivery at the same flow rate. A water pump, rated 10L/min max. flow, 10m max. head, and 120W power consumption, works with a 3000W heater for temperature regulation. Tanks include two 3L reactant tanks, a 5L product tank, and an 8L heating water tank. Reactants are preheated at the beginning of the unit before delivery into the reactor. A combined conductivity and temperature sensor identifies conversion, with values digitally shown on the unit's control cabinet.
Software
Software ReaktiLabX - 18 (optional). DAQ software specially designed in National Instrumentâ˘, LABVIEW⢠environment to measure and calculate the results of the apparatus. The software is optional; a set of electronic sensors is included when the software is used. The software can be run with any Windows⢠environment.
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q: What is the Batch Stirred Tank Reactor (Stand Alone) ReaktiLabX - 18 used for?
A: It is used to study discontinuous stirred tank reactor behavior, including saponification reaction fundamentals, reaction rate constant determination, and conversion analysis.
Q: What makes this reactor a "standalone" unit?
A: The apparatus includes its own heating water circuit, connections, pumps, and reactant and product tanks, allowing it to operate as a complete, self-contained batch type unit.
Q: What is the adjustable volume range of the reactor?
A: The reactor volume is adjustable between 1500 and 1950mL.
Q: How does the reactor's chambered bottom function?
A: The chambered bottom, made of stainless steel, acts as a heat exchanger, supporting isothermal operation and temperature effect studies.
Q: Is data acquisition software available with this system?
A: Yes, Software ReaktiLabX - 18 is available as an optional add-on, designed in National Instrument⢠LABVIEW⢠environment, and can run with any Windows⢠environment.