Continuous Stirred Tank Reactor in Series (Stand Alone) | ReaktiLabX - 14
Product Overview
The Continuous Stirred Tank Reactor in Series (Stand-Alone) ReaktiLabX - 14 connects three glass reactors in series as a self-contained unit. This Continuous Stirred Tank Reactor in Series (Stand-Alone) features five stirrers, stainless steel chambered bottoms as heat exchangers, and dedicated pumps for reactant and product delivery. It includes its own heating water circuit and tanks, requiring no external supply unit. Optional DAQ software enables measurement and calculation of results.
Technical Specifications
Continuous Stirred Tank Reactor in Series (Stand Alone) ReaktiLabX - 14 â Technical Specifications
| Specification | Detail |
|---|---|
| Reactors | 3 identical stirred tank reactors made of glass connected in series |
| Chambered Bottom | Made of stainless steel as heat exchanger |
| Inter-Reactor Delivery | Via 2 peristaltic pumps |
| Reactor Capacity | Small reactor capacity for less consumption of chemicals |
| Sensor | For measuring the conductivity and temperature |
| Display | Of conductivity and temperature |
| Temperature Control | In the reactor |
Technical Data
3 Reactors
| Parameter | Value |
|---|---|
| Outer diameter | each 110mm |
| Inside diameter | each 100mm |
| Height | each 250mm |
| Reactor capacity | each approx. 1950mL/min |
| Adjustable volume | 1500~1950mL |
| Material | Boro 3.3 glass |
Stirrer
| Parameter | Value |
|---|---|
| Speed | approx. 300minâťÂš |
| Quantity | 5 |
Peristaltic Pump for Reactants
| Parameter | Value |
|---|---|
| Quantity | 2 |
| Max. flow rate | approx. 500mL/min |
Peristaltic Pump for Products
| Parameter | Value |
|---|---|
| Max. flow rate | approx. 500mL/min |
Water Pump
| Parameter | Value |
|---|---|
| Max. flow rate | 10L/min |
| Max. head | 10m |
| Power consumption | 120W |
Tanks
| Parameter | Value |
|---|---|
| Reactants | 2x 3L |
| Product | 5L |
| Heating water | 8L |
Measuring Ranges
| Parameter | Value |
|---|---|
| Conductivity | 0~200mS/cm |
| Temperature | 0~60°C |
Heater
| Parameter | Value |
|---|---|
| Power consumption | 3000W |
Key Features
Key Features
- Reactors: 3 identical, glass, 110mm outer diameter, 100mm inside diameter, 250mm height each
- Adjustable Volume: 1500~1950mL, boro 3.3 glass material
- Stirrers: 5, approx. 300minâťÂš speed
- Reactant Pumps: 2 peristaltic pumps, approx. 500mL/min max. flow rate each
- Product Pump: peristaltic, approx. 500mL/min max. flow rate
- Water Pump: 10L/min max. flow, 10m max. head, 120W power consumption
- Heater: 3000W power consumption
- Tanks: 2x 3L reactant tanks, 5L product tank, 8L heating water tank
- Chambered Bottom: stainless steel, functions as heat exchanger
- Self-Contained Design: built-in pumps, tanks, and heating circuit make this Continuous Stirred Tank Reactor in Series (Stand-Alone) fully independent
Experiments
- Fundamentals of a saponification reaction
- Conversion in each reactor depending on: retention time, temperature, concentration
Construction and Design
The Continuous Stirred Tank Reactor in Series (Stand Alone) ReaktiLabX - 14 consists of 3 identical stirred tank reactors, each made of glass, 110mm outer diameter, 100mm inside diameter, 250mm in height, with an adjustable volume of 1500 to 1950mL. Five stirrers, operating at approximately 300minâťÂš, ensure homogenous mixing across the reactors. Each reactor's chambered bottom, made of stainless steel, functions as a heat exchanger. Two peristaltic pumps, each with a maximum flow rate of approximately 500mL/min, deliver reactants, while a separate peristaltic pump handles product delivery at the same flow rate. Delivery between the stirred tanks occurs via 2 peristaltic pumps. A water pump, rated 10L/min max. flow, 10m max. head, and 120W power consumption, works with a 3000W heater for temperature regulation. Tanks include two 3L reactant tanks, a 5L product tank, and an 8L heating water tank. A combined conductivity and temperature sensor identifies conversion in each reactor, with values digitally displayed.
Software
Software ReaktiLabX - 14 (optional). DAQ software specially designed in National Instrumentâ˘, LABVIEW⢠environment to measure and calculate the results of the apparatus. The software is optional; a set of electronic sensors is included when the software is used. The software can be run with any Windows⢠environment.
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q: What is the Continuous Stirred Tank Reactor in Series (Stand-Alone) ReaktiLabX - 14 used for?
A: It is used to study stirred tank reactor behavior and operation sequentially across three reactors connected in series, examining conversion, saponification fundamentals, and retention time effects.
Q: How many reactors are connected in series?
A: Three identical stirred tank reactors, each with an adjustable volume of 1500 to 1950mL, are connected in series.
Q: What makes this unit "standalone"?
A: The apparatus includes its own heating water circuit, connections, pumps, and reactant and product tanks, allowing it to operate as a self-contained unit.
Q: How many stirrers does the system have?
A: The system has 5 stirrers, operating at approximately 300minâťÂš.
Q: Is data acquisition software available with this system?
A: Yes, Software ReaktiLabX - 14 is available as an optional add-on, designed in National Instrument⢠LABVIEW⢠environment, and can run with any Windows⢠environment.