Gearbox Apparatus | ProDynami - 1362
Product Overview
The Gearbox Apparatus ProDynami - 1362 uses an 'H' style gear change mechanism mounted on a sturdy wall mounted frame. This Gearbox Apparatus features three forward gears and one reverse, with gears of 20, 26, 52, and 39 teeth at module 1. It includes reversible input and output shafts, protractors for angular measurement, and transparent safety guards. Load-bearing pulleys and a full weight set support hands-on velocity and torque ratio experiments.
Technical Specifications
Gearbox Apparatus ProDynami - 1362, Technical Specifications
| Specification | Detail |
|---|---|
| Gear Selection | 'H' selection of gears |
| Gear Module | Module 1 |
| Gear Teeth Counts | 20 tooth, 26 tooth, 52 tooth, 39 tooth gears in system |
| Gear Ratios | Three (3) forward gears and one (1) reverse |
| Pulley Diameter | 脴87.5mm |
| Shaft Reversal | Input and output shaft can be reversed |
| Hangers | Two (2) hangers of 100g each |
| Weights | Set of slotted weights |
| Documentation | Comprehensive instruction manual provided |
Technical Data
Detailed dimensional or quantitative technical data beyond the specifications above was not provided in the source.
Key Features
Key Features
- Gear Selection: 'H' style change with gear change lever and knob
- Gear Teeth Counts: 20, 26, 52, and 39 tooth gears
- Module: 1
- Gear Ratios: 3 forward gears, 1 reverse
- Pulley Diameter: 脴87.5mm
- Shaft Reversal: input and output shaft can be reversed
- Rotating Handle: attached to the side of the input pulley, allows the whole gearbox to be rotated
- Protractors: fitted on input and output shaft pulleys
- Safety Guards: clear transparent guards maintain safety and visibility
- Load Application: input and output pulleys allow loads to be applied for lifting and lowering on this Gearbox Apparatus
- Weight Set: two 100g hangers plus a set of slotted weights
Experiments
- Measure of the angular displacement at the input and output of the gear box and comparison with the calculated values
- Calculation of the efficiency for different ratios according to the torque at entry
- Enables velocity and torque ratios to be determined
Construction and Design
The Gearbox Apparatus ProDynami - 1362 is built on a sturdy wall mounted frame housing all gears, shafts, bearings, and levers. An 'H' style change mechanism, with gear change lever and knob, selects between gears finished to industry standard and meshing in different ratios: 20 tooth, 26 tooth, 52 tooth, and 39 tooth, at module 1, giving three forward gears and one reverse. All gears run on shafts fitted into bearings, with the changing mechanism ensuring smooth transition. Gears can be slid across each other using a lever with ball knob, and the whole gearbox can be rotated via a rotating handle attached to the side of the input pulley, which has a diameter of 脴87.5mm. Protractors are fitted on the input and output shaft pulleys, both of which can be reversed. Clear transparent guards maintain safety and visibility. Two hangers of 100g each, along with a set of slotted weights, drive the shafts via the input and output pulleys for lifting and lowering loads.
Scope of Delivery
- 1 Experimental unit
- 1 Instruction manual
- 2 Sets of weights
- 1 Thread
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q: What is the Gearbox Apparatus ProDynami - 1362 used for?
A: It is used to measure angular displacement at the input and output of a gearbox, calculate efficiency for different gear ratios, and determine velocity and torque ratios.
Q: How many forward and reverse gears does the apparatus have?
A: The apparatus has three forward gears and one reverse gear.
Q: What gear teeth counts are used in this system?
A: The system uses gears with 20, 26, 52, and 39 teeth, at module 1.
Q: Can the input and output shafts be reversed?
A: Yes, the input and output shaft can be reversed.
Q: What is the pulley diameter on this apparatus?
A: The pulley diameter is 脴87.5mm.