Kaplan Turbine Apparatus | FluidoSurgeX 208

Key Features

Key Features-

• Demonstration of Kaplan turbine operating principles

• Axial flow reaction turbine suitable for low head applications

• Adjustable guide vanes for changing angle of incidence

• Flow rate control through hydraulic bench throttle valve

• Band brake loading for power and efficiency studies

• Non-contact speed measurement at turbine shaft

• Suitable for controlled laboratory experimentation

Applications-

• Fluid mechanics laboratory training

• Study of hydraulic turbines

• Power output and efficiency analysis

• Investigation of guide vane influence on turbine performance

• Educational demonstrations of energy conversion in turbomachinery

Construction & Design Details-

The apparatus consists of a compact Kaplan turbine with fixed impeller blades and adjustable guide vanes. The turbine is connected to a hydraulic bench operating in a closed water circuit. Turbine loading is achieved using an air-cooled band brake fitted with a dynamometer for torque measurement. Inlet pressure is measured using a manometer, while rotational speed is captured using a non-contact tachometer.

Experiments-

• Determination of hydraulic and mechanical power output curves at different speeds

• Determination of turbine head

• Calculation of turbine efficiency

• Study of the effect of guide vane position on power output

• Study of the effect of guide vane position on efficiency

Required for Operation-

• Hydraulic bench with closed water circuit or suitable water supply

• Drain connection

Standard Scope of Delivery-

• 1 experimental module

• 2 spring balances

• 1 non-contact tachometer

• 1 instruction manual

Export & Supply Capability-

SCIENTICO manufactures the Kaplan Turbine Apparatus FluidoSurgeX 208 for supply to engineering institutes, technical universities, and training laboratories. The unit is suitable for domestic and international shipment. Export packing and documentation are provided according to customer and destination requirements.

Standards & Compliance

• Manufactured under ISO 9001:2015 Quality Management System
• CE Marking - European Conformity where applicable
• Supplied with calibration certificate, operation manual, and experiment guide
• 12-month manufacturer's warranty (parts & labour from installation)

Ordering & Delivery

• Incoterms: CIF to destination seaport, FOB Mundra/Nhava Sheva, or Ex-Works Ambala
• Lead time: 3–5 weeks production + sea transit to destination
• Payment: LC (Letter of Credit) or T/T bank transfer against proforma invoice
• Documentation: commercial invoice, packing list, bill of lading, certificate of origin, insurance certificate

Frequently Asked Questions

Q1. What type of turbine is used in FluidoSurgeX 208?
It is a Kaplan type reaction turbine with axial flow.

Q2. How is the water flow rate controlled?
The flow rate is adjusted using the throttle valve on the hydraulic bench.

Q3. How is turbine loading applied?
The turbine is loaded using an air-cooled band brake.

Q4. What parameters can be measured during experiments?
Speed, torque, inlet pressure, head, power output, and efficiency can be determined.

Q5. Is a hydraulic bench included with the apparatus?
No. A hydraulic bench or suitable water supply is required for operation.