Lathe Gear | ProDynami 1370
Product Overview
Lathe Gear ProDynami 1370 replicates all the essential features of a workshop lathe, including a shiftable main gear, a Norton feed gear, a change gear and a tumbler gear. This Lathe Gear is driven by a hand crank with a graduated dial for slow, safe operation, and uses a recorder drum with stylus to simulate feed on paper. The open design exposes all gear parts for clear observation. The primary spindle offers 9 speed stages and the feed gear offers 7 stages.
Technical Specifications
Lathe Gear ProDynami 1370 — Technical Specifications
| Parameter | Value |
|---|---|
| Design and Function | Design and function of a lathe gear |
| Unit Type | Fully functional experimental unit |
| Design | Open design for optimum insight |
| Main Gear | Shiftable |
| Change Gear | Included |
| Tumbler Gear | Included |
| Feed Recording | Recorded on paper via recorder drum on the primary spindle |
| Drive Method | Driven by hand crank |
| Feed Gear | Norton gear, used to drive the lead screw |
| Primary Spindle Speed Stages | 9 |
| Feed Gear Stages | 7 |
Technical Data
Primary Spindle
| Parameter | Value |
|---|---|
| Speed Stages | 9 |
Feed Gear
Key Features
Key Features
- Unit Type: Lathe Gear with fully functional experimental design
- Main Gear: Shiftable
- Feed Gear: Norton gear, drives the lead screw
- Change Gear: Included
- Tumbler Gear: Included
- Drive Mechanism: Hand crank with graduated dial
- Operation Speed: Slow and completely safe process
- Tool Slide Motion: Longitudinal motion only
- Automatic Feed: Achieved by lead screw
- Workpiece Simulation: Removable recorder drum
- Cutting Tool Replacement: Stylus in place of cutting tool
- Design: Open design for clear observation of gear parts
- Repeatability: Experiments easily repeatable with numerous variations
- Primary Spindle Speed Stages: 9
- Feed Gear Stages: 7
Experiments
- Investigation of all essential gear functions of a lathe
- Main gear
- Change gear
- Tumbler gear
- Feed gear (Norton gear)
Construction and Design
The Lathe Gear ProDynami 1370 has a shiftable main gear, a feed gear for driving the lead screw (Norton gear), a change gear and a tumbler gear. Drive is supplied by a hand crank with a graduated dial. This allows processes to run slowly and completely safely. The tool slide performs only longitudinal motion. Automatic longitudinal feed is achieved by a lead screw. A removable recorder drum simulates the workpiece. The cutting tool is replaced by a stylus. Feed is recorded on paper via the recorder drum on the primary spindle. The gear parts are exposed, allowing all functions to be observed clearly. The design offers optimum insight due to its open construction. The primary spindle has 9 speed stages. The feed gear has 7 stages. This construction makes the Lathe Gear suitable for investigating all essential gear functions of a workshop lathe with easily repeatable experiments.
Scope of Delivery
- 1 Experimental unit
- 1 Instruction manual
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q: What is the Lathe Gear ProDynami 1370 used for?
A: It is used to investigate all essential gear functions of a lathe, including the main gear, change gear, tumbler gear, and feed gear (Norton gear).
Q: How is the unit driven?
A: It is driven by a hand crank with a graduated dial, allowing processes to run slowly and completely safely.
Q: How is the workpiece simulated?
A: A removable recorder drum simulates the workpiece, while the cutting tool is replaced by a stylus, recording the feed on paper via the recorder drum on the primary spindle.
Q: How many speed and feed gear stages does the unit have?
A: The primary spindle has 9 speed stages and the feed gear has 7 stages.
Q: What does the scope of delivery include?
A: 1 experimental unit and 1 instruction manual.