Service Unit for Chemical Reactors | ReaktiLabX - 07
Product Overview
The Service Unit for Chemical Reactors ReaktiLabX - 07 supplies and supports six different chemical reactor types for hands-on study. This Service Unit for Chemical Reactors features dual peristaltic pumps, a heating water circuit with 3 heaters, and a combined conductivity and temperature sensor. It includes quick-release hose connections, glass reactant and product tanks, and a heated magnetic stirrer. Optional DAQ software enables measurement and calculation of results.
Technical Specifications
Service Unit for Chemical Reactors ReaktiLabX - 07 — Technical Specifications
| Specification | Detail |
|---|---|
| Supply Capability | Supply unit for 6 different chemical reactor types |
| Reactor Connection | Via hoses with quick-release couplings |
| Water System | Tank with pump and low water cut-off for heating and cooling using lab water supply |
| Temperature Control | Temperature controller for control of the reactants and reactors |
| Water Circuit | With tank with built in heaters |
| Tanks | 2 glass tanks for reactants and products |
| Pumps | 2 peristaltic pumps to deliver the reactants and products |
| Sensor | 1 combined sensor for measuring the conductivity and temperature |
Technical Data
Peristaltic Pump for Reactants
| Parameter | Value |
|---|---|
| Max. Flow rate | approx. 0.02~2200mL/min |
| Speed | < 600rpm |
| Drive | Variable Speed |
Peristaltic Pump for Products
| Parameter | Value |
|---|---|
| Max. Flow rate | approx. 0.02~2200mL/min |
| Speed | < 600rpm |
| Drive | Variable Speed |
Water Pump
| Parameter | Value |
|---|---|
| Max. Flow rate | 10L/min |
| Max. Head | 30m |
| Power consumption | 500W |
Heater
| Parameter | Value |
|---|---|
| Power consumption | 4500W |
| Quantity | 3, 1500W each |
| Heating water capacity | 25L |
Feed Storage Vessel
| Parameter | Value |
|---|---|
| Vessel | 4L |
Magnetic Stirrer
| Parameter | Value |
|---|---|
| Feature | With heated base |
Measuring Ranges
| Parameter | Value |
|---|---|
| Conductivity | 0~200mS/cm |
| Temperature | 0~60°C |
Key Features
Key Features
- Reactor Compatibility: supply unit for 6 different chemical reactor types
- Connection System: hoses with quick-release couplings for simple installation
- Reactant and Product Pumps: 2 peristaltic pumps, flow rate approx. 0.02~2200mL/min, variable speed, <600rpm
- Water Pump: 10L/min max. flow, 30m max. head, 500W power consumption
- Heaters: 3, 1500W each, 4500W total power consumption, 25L heating water capacity
- Tanks: 2 glass tanks for reactants and products, plus 4L feed storage vessel
- Sensor: combined conductivity and temperature measurement
- Magnetic Stirrer: heated base, controllable via switch cabinet
- Retention Time Control: pump speed adjustment changes reactant retention time, central to studies on this Service Unit for Chemical Reactors
Experiments
- Learning the design and operation of different reactor types
- Conversion depending on: reactor type, retention time in the reactor, temperature, concentration
- Fundamentals of a saponification reaction
- Determination of the retention time distribution
Construction and Design
The Service Unit for Chemical Reactors ReaktiLabX - 07 mounts the reactor under study using two pins, connected to the supply unit via hydraulic hoses with rapid release couplings. Two reactant tanks, made of glass, are set up on the trainer to allow continuous reactor operation, supplied by two peristaltic pumps rated approximately 0.02 to 2200mL/min at variable speed below 600rpm. An additional glass tank and pump handle the product. A heating water circuit, including a water pump rated 10L/min max. flow, 30m max. head, and 500W power consumption, along with 3 heaters at 1500W each (4500W total) and a 25L heating water capacity, regulates reactor temperature. A combined sensor measures temperature and conductivity simultaneously in the reactor. A 4L feed storage vessel and a magnetic stirrer with heated base support reactant preparation. Stirrers in the various reactors are controlled via the switch cabinet.
Software
Software ReaktiLabX - 07. DAQ software specially designed in National Instrument™, LABVIEW™ environment to measure and calculate the results of the apparatus. The software is optional; a set of electronic sensors is included when the software is used. The software can be run with any Windows™ environment.
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q: What is the Service Unit for Chemical Reactors ReaktiLabX - 07 used for?
A: It is used as a supply unit for studying six different chemical reactor types, providing reactant delivery, temperature control, and conductivity measurement.
Q: How many reactor types can this unit support?
A: The unit supports 6 different chemical reactor types, connected via hoses with quick-release couplings.
Q: How are reactants delivered to the reactor?
A: Two peristaltic pumps, with a flow rate of approximately 0.02 to 2200mL/min at variable speed, deliver reactants into the reactor.
Q: How is reactor temperature regulated?
A: A heating water circuit with a pump, tank, and 3 heaters (1500W each, 4500W total) regulates the reactor temperature.
Q: Is data acquisition software available with this system?
A: Yes, Software ReaktiLabX - 07 is available, designed in National Instrument™ LABVIEW™ environment, and can run with any Windows™ environment.