Small Steam Generator | ThermoFlux-24
Product Overview
The Small Steam Generator ThermoFlux-24 is a compact laboratory steam source providing continuous steam at up to 2.5 kg/h from a 1-litre internal vessel. This small steam generator delivers variable power from 0 to 3,000 W, boils 3/4 litre of water in 10 minutes, and features dual steam ports for simultaneous supply to two laboratory groups. An internal electric heater eliminates open flame and exposed coils. Safety features include a rubber stopper with pressure release, a low water warning light, and an extra-wide tip-resistant base. A baster for hot water removal is included.
[email protected]
Technical Specifications
Small Steam Generator ThermoFlux-24, Technical Specifications
| Parameter | Value |
|---|---|
| Model | ThermoFlux-24 |
| Water Capacity | 1 litre |
| Variable Power Range | 0 to 3,000 W |
| Steam Output | Up to 2.5 kg/h continuous |
| Time to Boil | 3/4 litre in 10 minutes |
| Steam Ports | 2 (dual port) |
| Heater Type | Internal electric heater |
| Open Flame | None |
| Exposed Coils | None |
| Seal | Rubber stopper with safety pressure release |
| Low Water Indicator | Low water warning light |
| Base | Extra-wide for stability |
| Accessories Included | Baster for hot water removal |
Technical Data
Power and Steam Output
| Parameter | Value |
|---|---|
| Variable Power | 0 to 3,000 W |
| Steam Output | Up to 2.5 kg/h continuous |
| Time to Boil (3/4 litre) | 10 minutes |
Water System
| Parameter | Value |
|---|---|
| Water Capacity | 1 litre |
| Low Water Warning | Warning light included |
| Hot Water Removal | Baster included |
Steam Ports
| Parameter | Value |
|---|---|
| Number of Ports | 2 |
| Simultaneous Supply | 2 laboratory groups |
Safety and Physical Features
| Parameter | Value |
|---|---|
| Heater Type | Internal electric, no open flame, no exposed coils |
| Seal Type | Rubber stopper |
| Pressure Safety | Safety pressure release on rubber stopper |
| Base Design | Extra-wide for tip-over resistance |
Key Features
Key Features
- Variable Power: 0 to 3,000 W, adjustable steam flow to suit experimental requirements
- Steam Output: Continuous steam at up to 2.5 kg/h
- Boil Time: Boils 3/4 litre of water in 10 minutes
- Water Capacity: 1 litre
- Dual Steam Ports: Supplies two laboratory groups simultaneously
- Small Steam Generator Heater: Internal electric heater, no open flame, no exposed coils
- Safety Seal: Rubber stopper with built-in safety pressure release
- Low Water Warning: Warning light alerts user to low water level
- Base: Extra-wide design for stable, tip-resistant operation
- Hot Water Removal: Baster included for safe removal of hot water during experiments
Experiments
- Supply of constant-temperature steam as a heat reservoir for laboratory thermal experiments
- Simultaneous steam supply to two laboratory groups via dual steam ports
Construction and Design
The Small Steam Generator ThermoFlux-24 is constructed around a 1-litre water vessel heated by an internal electric element. This small steam generator uses no open flame and has no exposed heating coils, reducing burn and fire risk in the laboratory environment. Power is adjustable from 0 to 3,000 W, allowing continuous control of steam generation rate. At full output, the unit delivers steam continuously at up to 2.5 kg/h and brings 3/4 litre of water to boil in ten minutes.
Two steam outlet ports on the unit allow simultaneous connection to two experimental setups or two separate laboratory groups. The vessel is sealed with a rubber stopper that incorporates a safety pressure release to prevent pressure build-up. A low water warning light provides a visible alert before the water level drops to a critical level. The extra-wide base lowers the centre of gravity, making the unit resistant to accidental tipping. A baster is included for safe removal of hot water from the vessel during experiments without removing the stopper assembly.
Scope of Delivery
- 1 Small Steam Generator ThermoFlux-24
- 1 Baster
Standards & Compliance
- Manufactured under ISO 9001:2015 Quality Management System
- CE Marking - European Conformity where applicable
- Supplied with calibration certificate, operation manual, and experiment guide
- 12-month manufacturer's warranty (parts & labour from installation)
Ordering & Delivery
- Incoterms: CIF to destination seaport, FOB Mundra/Nhava Sheva, or Ex-Works Ambala
- Lead time: 3–5 weeks production + sea transit to destination
- Payment: LC (Letter of Credit) or T/T bank transfer against proforma invoice
- Documentation: commercial invoice, packing list, bill of lading, certificate of origin, insurance certificate
Frequently Asked Questions
Q1: How much steam does the ThermoFlux-24 produce?
The unit delivers continuous steam at up to 2.5 kg/h. It boils 3/4 litre of water in approximately ten minutes and maintains a constant-temperature steam supply thereafter.
Q2: Can the ThermoFlux-24 supply more than one experiment at a time?
Yes. Two steam ports allow the unit to supply two laboratory groups or two experimental setups simultaneously from a single generator.
Q3: What safety features are built into this small steam generator?
Safety features include an internal electric heater with no open flame or exposed coils, a rubber stopper with a built-in safety pressure release, a low water warning light, and an extra-wide base for tip-over resistance.
Q4: How is the steam output adjusted?
Power is variable from 0 to 3,000 W. Adjusting the power setting controls the rate of steam generation to suit the flow requirements of the connected experiment.
Q5: Is this unit compatible with the Thermal Conductivity Apparatus ThermoFlux-25?
Yes. The Small Steam Generator ThermoFlux-24 is the recommended optional steam source for the Thermal Conductivity Apparatus ThermoFlux-25 and connects via plastic tubing supplied with that unit.