Stefan Boltzman Apparatus
Model ThermoFlux-2901
The Stefan Boltzman Apparatus ThermoFlux-2901 determines the Stefan Boltzman constant through radiation heat transfer measurement. Features a 200 mm copper hemisphere with hot water jacket heating, small copper test disc receiver, and four surface thermocouples for temperature measurement. Multi-channel digital indicator and built-in timer enable interval-based data collection. Requires 230 V.A.C. stabilized supply and 1.5 m × 1.5 m floor space.
The Stefan Boltzman Apparatus ThermoFlux-2901 is designed to determine the Stefan Boltzman constant through controlled radiation heat transfer experiments. This apparatus demonstrates the fundamental phenomenon of heat transfer by radiation using a heated copper hemisphere and a small test disc as the radiation receiver.
Product Overview
The Stefan Boltzman Apparatus ThermoFlux-2901 consists of a 200 mm diameter copper hemisphere fixed on a bakelite plate, surrounded by a hot water jacket. A hot water tank with integrated heater, positioned above the hemisphere, supplies heated water to the jacket, raising the hemisphere temperature. Heat transfers from the heated hemisphere to a small copper test disc (20 mm diameter, 1.5 mm thick) placed at the hemisphere center through radiation only. A thermocouple at the disc center measures disc temperature. Four thermocouples distributed on the hemisphere surface measure average hemisphere temperature. A built-in timer enables temperature measurements at constant intervals. A multi-channel digital temperature indicator simultaneously displays all thermocouple readings, allowing precise Stefan Boltzman constant determination by correlating radiation heat transfer to temperature differences.
Stefan Boltzman Apparatus ThermoFlux-2901 — Technical Specifications
| Specification | Details |
|---|---|
| Hemisphere Material | Copper, 200 mm diameter |
| Test Disc | Copper, 20 mm diameter, 1.5 mm thick |
| Heating System | Hot water jacket with external heater tank |
| Temperature Measurement | Multi-channel digital indicator |
| Disc Thermocouple | Single thermocouple at disc center |
| Hemisphere Thermocouples | Four thermocouples for average temperature measurement |
| Timing Control | Built-in timer for constant interval measurements |
| Power Supply | 230 V.A.C. stabilized with earthing |
| Floor Space | 1.5 m × 1.5 m at working height |
Technical Data
Hemisphere Assembly
- Material: Copper
- Diameter: 200 mm
- Mounting: Fixed on bakelite plate
- Surface: Serves as primary radiation source
Hot Water Heating System
- Jacket type: Surrounds hemisphere exterior
- Heat source: Hot water tank with integrated heater
- Position: Tank located above hemisphere
- Function: Maintains hemisphere at elevated temperature
Test Disc Assembly
- Material: Copper
- Diameter: 20 mm
- Thickness: 1.5 mm
- Placement: Center of hemisphere
- Function: Receives heat by radiation only
Temperature Measurement System
- Disc thermocouple: One at disc center
- Hemisphere thermocouples: Four distributed on surface
- Display: Multi-channel digital temperature indicator
- Timing: Built-in timer for interval-based measurements
Key Features
- Copper hemisphere: 200 mm diameter provides consistent radiation surface for Stefan Boltzman constant determination
- Hot water jacket heating: Surrounds hemisphere to achieve controlled elevated temperatures
- Small copper test disc: 20 mm diameter, 1.5 mm thick, positioned at hemisphere center for pure radiation heat transfer
- Thermocouple at disc center: Measures receiving disc temperature with precision
- Four hemisphere thermocouples: Distributed placement ensures accurate average hemisphere temperature reading
- Multi-channel digital temperature indicator: Simultaneous display of all thermocouple data for real-time analysis
- Built-in timer: Enables temperature measurements at constant intervals for accurate Stefan Boltzman constant calculation
- Hot water tank with heater: Integrated heating system maintains consistent hemisphere temperature
- Radiation-only heat transfer: Test disc position eliminates conduction and convection, isolating radiation effects
Experiments
- Determination of Stefan Boltzman constant from radiation heat transfer data
- Study of effect of hemisphere temperature on Stefan Boltzman constant value
- Analysis of radiation heat transfer rate versus temperature difference
- Verification of Stefan Boltzman law through experimental measurement
- Temperature gradient analysis across hemisphere surface
- Heat transfer rate calculation using thermocouple readings and time intervals
Construction and Design
The Stefan Boltzman Apparatus ThermoFlux-2901 features a copper hemisphere 200 mm in diameter fixed on a bakelite plate. A hot water jacket surrounds the hemisphere exterior. A hot water tank with integrated heater, positioned above the apparatus, supplies heated water to the jacket via connection tubing. The small copper test disc, 20 mm diameter and 1.5 mm thick, is positioned at the center of the hemisphere where it receives heat by radiation. A thermocouple embedded at the disc center measures its temperature continuously. Four thermocouples are distributed across the hemisphere surface to capture average hemisphere temperature. All thermocouples connect to a multi-channel digital temperature indicator mounted on the apparatus. A built-in timer allows operators to record temperature readings at predetermined intervals, essential for Stefan Boltzman constant determination calculations.
Scope of Delivery
- Copper hemisphere, 200 mm diameter on bakelite plate
- Hot water jacket assembly
- Copper test disc, 20 mm diameter, 1.5 mm thick
- Hot water tank with integrated heater
- Thermocouple for disc temperature measurement
- Four thermocouples for hemisphere surface measurement
- Multi-channel digital temperature indicator
- Built-in timer mechanism
- Connecting tubing for hot water circulation
- Power cord with earthing
Required for Operation
- 230 V.A.C. stabilized power supply with earthing
- Floor space: 1.5 m × 1.5 m at working height
- Level surface for apparatus placement
- Access to water source for hot water tank filling
Optional Accessories
- Software for data acquisition on LabView
- HMI touchscreen panel for easy usage and automated data logging
Q: How does the Stefan Boltzman Apparatus ThermoFlux-2901 isolate radiation heat transfer?
A: The small copper test disc is placed at the center of the heated hemisphere where it receives heat only through radiation. The design eliminates direct conduction and convection pathways, ensuring pure radiation heat transfer measurement.
Q: Why are four thermocouples placed on the hemisphere?
A: Four thermocouples distributed across the hemisphere surface provide an accurate average hemisphere temperature reading, which is essential for precise Stefan Boltzman constant calculation.
Q: What role does the built-in timer play?
A: The timer enables temperature measurements at constant intervals, allowing precise recording of temperature change over time, which is necessary for accurate Stefan Boltzman constant determination.
Q: What is the copper test disc size and placement?
A: The test disc is 20 mm diameter and 1.5 mm thick, made of copper. It is positioned at the center of the hemisphere to receive radiant heat transfer uniformly.
Q: Can hemisphere temperature be varied during experiments?
A: Yes, the hot water tank heater can be adjusted to change the temperature of the hot water circulating in the jacket, allowing study of how hemisphere temperature affects the Stefan Boltzman constant.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








