Study of I/P and P/I Converter | Prozessi PX 13
Product Overview
The Study of I/P and P/I Converter, Prozessi PX 13, is a tabletop trainer for electronic and pneumatic signal conversion studies. It includes an I/P converter, P/I converter, digital calibrator, pressure gauges, air regulator, and air filter regulator. The setup supports the Study of I/P and P/I Converter for working, calibration, linearity, hysteresis, accuracy, and repeatability. All components are mounted on a compact support housing for tabletop use.
Technical Specifications
Study of I/P and P/I Converter, Prozessi PX 13 - Technical Specifications
| Parameter | Specification |
|---|---|
| Product | Study of I/P and P/I converter |
| Product code | Prozessi PX 13 |
| Pressure Transmitter | Two wire type, range 0 to 1 bar, output 4 to 20 mA |
| I/P Converter | Input 4 to 20 mA, output 3 to 15 psig |
| Signal Isolator | Input 4 to 20 mA, output 4 to 20 mA |
| Digital Calibrator | Sink/Source, mA/mV mode |
| Air Regulator | Range 0 to 2.5 kg/cm2 |
| Air Filter Regulator | Range 0 to 2.5 kg/cm2 |
| Pressure Gauge | Range 0 to 2.5 kg/cm2 (2 Nos), Range 0 to 7 kg/cm2 (1 No) |
| Overall Dimensions | 550W x 300D x 400H mm |
| Optional | Mini compressor |
Technical Data
Pressure Transmitter
| Parameter | Value |
|---|---|
| Type | Two wire |
| Range | 0 to 1 bar |
| Output | 4 to 20 mA |
I/P Converter
| Parameter | Value |
|---|---|
| Input | 4 to 20 mA |
| Output | 3 to 15 psig |
Signal Isolator
| Parameter | Value |
|---|---|
| Input | 4 to 20 mA |
| Output | 4 to 20 mA |
Digital Calibrator
| Parameter | Value |
|---|---|
| Mode | Sink/Source, mA/mV |
Air Regulator
| Parameter | Value |
|---|---|
| Range | 0 to 2.5 kg/cm2 |
Air Filter Regulator
| Parameter | Value |
|---|---|
| Range | 0 to 2.5 kg/cm2 |
Pressure Gauge
| Parameter | Value |
|---|---|
| Range 1 | 0 to 2.5 kg/cm2, 2 Nos |
| Range 2 | 0 to 7 kg/cm2, 1 No |
Key Features
Key Features
- Mounting: Table mounted setup
- Operation: Compact and simple to operate
- Calibration: Digital calibrator, sink/source, mA/mV mode
- Configuration: Combined setup for Study of I/P and P/I Converter
- Signal Path: I/P converter input 4 to 20 mA, output 3 to 15 psig
Experiments
- Study of flapper nozzle system
- Study of working principle and calibration procedure of I/P converter
- Study of working principle and calibration procedure of P/I converter
- Study of linearity, hysteresis, accuracy and repeatability of I/P converter
- Study of linearity, hysteresis, accuracy and repeatability of P/I converter
Construction and Design
The Study of I/P and P/I Converter, Prozessi PX 13, is built around a support housing designed for tabletop mounting. The I/P converter, P/I converter, digital calibrator, pressure gauges, air regulator, and air filter regulator are all mounted on this housing. All components are connected through the required piping and fittings. The compact layout supports the Study of I/P and P/I Converter for both converter types in one unit.
Scope of Delivery
- I/P converter
- P/I converter
- Digital calibrator
- Pressure gauges (2 Nos range 0 to 2.5 kg/cm2, 1 No range 0 to 7 kg/cm2)
- Air regulator
- Air filter regulator
- Support housing with piping and fittings
Optional Accessories
- Mini compressor
Required for Operation
- Electric supply: 230 +/- 10 VAC, 50 Hz, 1 phase
- Air supply: Clean, oil and moisture free air, pressure 2 bar, consumption 50 LPH
Documentation & conformity review
- This printable view reproduces the current website record. It is not an engineer-approved, order-specific datasheet.
- Request applicable conformity documents, manuals, calibration records and warranty terms for the selected model and configuration.
- Confirm supplied accessories, utilities and acceptance requirements in the written quotation before ordering.
Ordering & Delivery
- Send the product name, quantity, delivery country and destination with your enquiry.
- Production schedule, freight, payment terms and export documents are confirmed in the written quotation.
Frequently Asked Questions
Q1: What is the purpose of the Study of I/P and P/I Converter setup?
A: It is designed for understanding the basic principles of electronic and pneumatic signal conversion, using an I/P converter and a P/I converter.
Q2: What output does the I/P converter give in this setup?
A: The I/P converter gives an output of 3 to 15 psig for an input of 4 to 20 mA.
Q3: What output does the P/I converter give?
A: The P/I converter gives an output of 4 to 20 mA DC.
Q4: What role does the digital calibrator play?
A: It acts as a current source, supplying 4 to 20 mA DC to the I/P converter, and as a current sink, receiving the output current from the P/I converter.
Q5: What parameters can be studied using this setup?
A: Linearity, hysteresis, accuracy, and repeatability of both the I/P and P/I converters, along with the flapper nozzle system.