Vibration of Transverse Beam with Different Masses
Model ProDynami - 1322
The Vibration of Transverse Beam with Different Masses ProDynami – 1322 studies free vibration characteristics of a bending bar using a rectangular frame. This Vibration of Transverse Beam with Different Masses apparatus supports vertical or horizontal bar mounting with adjustable clamping length and weight positioning. An inductive position sensor and digital oscilloscope measure and display oscillation amplitude and waveform. Optional DAQ software enables measurement and calculation of results.
The Vibration of Transverse Beam with Different Masses ProDynami – 1322 is designed to study the characteristic free vibration of a bending bar. This Vibration of Transverse Beam with Different Masses apparatus lets the bar oscillate when loaded with weight and given a deflection, with time period and frequency depending on the bar’s mass and dimensions. It uses a rectangular frame allowing the bar to be placed in any direction.
Product Overview
This unit is designed to study the characteristics free vibration of a bending bar. When a bar is loaded with some weight and given a deflection, it starts oscillating. The time period and frequency of oscillation depends on the mass and dimensions of the bar. The unit consists of a rectangular frame on which the bar can be placed in any direction.
The bar is fixed at one end and mass is added on the bar at the other end. The unit contains a proximity sensor as well, which measures the time period and frequency of the vibrating bar. The waveform of the vibration can be seen by oscilloscope. The bending bar can be mounted vertically (standing or hanging) or horizontally into the frame. By varying the free clamping length or moving additional weights, the natural frequency of the bar is changed. The bar is deflected manually to start damped vibrations on this Vibration of Transverse Beam with Different Masses apparatus. A non-contact position sensor measures the corresponding amplitudes.
Vibration of Transverse Beam with Different Masses ProDynami – 1322, Technical Specifications
| Specification | Detail |
|---|---|
| Study Focus | Investigation of the free vibration of a bar |
| Bending Bar | Elastic, with movable weight |
| Influencing Factors | Free clamping length and weight on natural frequency |
| Position Sensor | Inductive, to measure oscillation amplitudes |
| Measuring Tool | Fixable meter rule |
Technical Data
Bending Bar
| Parameter | Value |
|---|---|
| Material | Stainless steel and Aluminum |
| Dimension | 700 x 25 x 4mm |
Weights
| Parameter | Value |
|---|---|
| Set | 10x 100g |
Sensors
| Parameter | Value |
|---|---|
| Type | Analogue voltage level |
| Measurement | 0~40mm |
| Output | 0~10VDC, proportional to position |
Recorder
| Parameter | Value |
|---|---|
| Type | Digital oscilloscope |
Key Features
- Bending Bar: stainless steel and aluminum, 700 x 25 x 4mm
- Weight Set: 10x 100g
- Position Sensor: inductive, analogue voltage level, 0~40mm measurement range
- Sensor Output: 0~10VDC, proportional to position
- Waveform Display: digital oscilloscope
- Mounting Orientation: vertical (standing or hanging) or horizontal, on this Vibration of Transverse Beam with Different Masses apparatus
- Frequency Adjustment: varying free clamping length or moving additional weights changes natural frequency
- Measuring Tool: fixable meter rule
- Software: optional DAQ software for measurement and calculation
Experiments
- Free vibration of a vertical bending bar
- Determination of natural frequencies according to Rayleigh
Construction and Design
The Vibration of Transverse Beam with Different Masses ProDynami – 1322 consists of a rectangular frame on which an elastic bending bar can be placed in any direction. The bending bar, made of stainless steel and aluminum, measures 700 x 25 x 4mm. The bar is fixed at one end, with mass added at the other end using a set of 10x 100g weights. The bar can be mounted vertically (standing or hanging) or horizontally into the frame. An inductive position sensor, providing an analogue voltage level output of 0 to 10VDC proportional to position, measures oscillation amplitudes over a range of 0 to 40mm. A proximity sensor measures the time period and frequency of the vibrating bar, with the waveform of vibration displayed on a digital oscilloscope. A fixable meter rule supports measurement of the free clamping length.
Software
Software ProDynami – 1322 (optional). DAQ software specially designed in National Instrument™, LABVIEW™ environment to measure and calculate the results of the apparatus. The software is optional; a set of electrical vibration sensors with clamping set is included when the software is used. The software can be run with any Windows™ environment.
Scope of Delivery
- 1 experimental module
- 1 set of beam
- 1 analogue sensor
- 1 set of weight
- 1 measuring scale
- 1 instruction manual
Q: What is the Vibration of Transverse Beam with Different Masses ProDynami – 1322 used for?
A: It is used to study the free vibration characteristics of a bending bar, including natural frequency determination according to Rayleigh’s method.
Q: What is the bending bar made of and what are its dimensions?
A: The bending bar is made of stainless steel and aluminum, measuring 700 x 25 x 4mm.
Q: How is the natural frequency of the bar changed?
A: The natural frequency can be changed by varying the free clamping length or moving additional weights along the bar.
Q: How are oscillation amplitudes measured?
A: An inductive position sensor with an analogue voltage output of 0 to 10VDC, proportional to position, measures oscillation amplitudes over a range of 0 to 40mm.
Q: Is data acquisition software available with this system?
A: Yes, Software ProDynami – 1322 is available as an optional add-on, designed in National Instrument™ LABVIEW™ environment, and can run with any Windows™ environment.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








