Worm And Wheel Apparatus | ProDynami - 1224
Product Overview
The Worm And Wheel Apparatus ProDynami - 1224 studies worm and wheel mechanism performance, converting circular motion to linear motion or vice versa. This Worm And Wheel Apparatus features a bronze worm gear wheel, steel worm, and ball bearing-mounted pulleys for applying load and effort forces. It offers dual transmission ratios of 30:1 and 36:1 for efficiency and friction studies. Separate weight sets and a comprehensive instruction manual are included.
[email protected]
Technical Specifications
Worm And Wheel Apparatus ProDynami - 1224, Technical Specifications
| Specification | Detail |
|---|---|
| Unit Type | Demonstration and student experimental unit on the set-up and principle of a worm gear |
| Worm Gear Wheel | Bronze |
| Worm | Steel |
| Side Drums | 2 Aluminium |
| Transmission | Double transmission ratio |
| Bearing Mounting | Worm, worm gear wheel and pulleys ball bearing-mounted |
| Base Plate | HDF |
Technical Data
Side Drum Diameter
| Parameter | Value |
|---|---|
| On worm shaft | d=100mm, 120mm |
| On worm gear wheel shaft | d=120mm |
Worm Drive
| Parameter | Value |
|---|---|
| Axle base | Φ80mm |
| Transmission ratio | 30:1 & 36:1 |
| Modulus | m=3~4mm |
Weights on Worm Shaft
| Parameter | Value |
|---|---|
| Set | 1x 0.5N (hanger), 2x 0.5N, 2x 1N, 2x 2N, 2x 5N |
Weights on Worm Wheel
| Parameter | Value |
|---|---|
| Set | 1x 1N (hanger), 1x 10N, 3x 20N |
Additional Data
| Parameter | Value |
|---|---|
| Number of gears | 1 |
| Power Transmission | 30 & 36 |
Key Features
Key Features
- Worm Gear Wheel: bronze
- Worm: steel
- Side Drums: 2, aluminium, diameters 100mm and 120mm on worm shaft, 120mm on worm gear wheel shaft
- Worm Drive: axle base Φ80mm, transmission ratio 30:1 & 36:1, modulus m=3~4mm
- Bearing Mounting: worm, worm gear wheel, and pulleys ball bearing-mounted
- Base Plate: HDF
- Load Application: cord and hanger used with pulleys, central to how this Worm And Wheel Apparatus applies load and effort forces
- Weight Sets: separate sets for worm shaft and worm wheel
- Power Transmission: 30 and 36 ratios available
Experiments
- Learning the key variables and correlations of a worm gear
- Investigating: transmission ratio, torque, friction and self-locking
- Determining efficiency
Construction and Design
The Worm And Wheel Apparatus ProDynami - 1224 consists of a worm and wheel mechanism, with the worm gear wheel made of bronze and the worm made of steel. Two aluminium side drums are fitted, with diameters of 100mm and 120mm on the worm shaft and 120mm on the worm gear wheel shaft. The worm drive has an axle base of Φ80mm, a transmission ratio of 30:1 and 36:1, and a modulus of 3 to 4mm. The worm, worm gear wheel, and pulleys are ball bearing-mounted on an HDF base plate. Pulleys connect the worm and wheel mechanism to apply load and effort forces, using cord and hangers. Weights are applied on the worm shaft (1x 0.5N hanger, 2x 0.5N, 2x 1N, 2x 2N, 2x 5N) and on the worm wheel (1x 1N hanger, 1x 10N, 3x 20N).
Scope of Delivery
- 1 experimental unit
- 1 instruction manual
- 1 thread
- 2 sets of weight
Standards & Compliance
- Manufactured under ISO 9001:2015 Quality Management System
- CE Marking - European Conformity where applicable
- Supplied with calibration certificate, operation manual, and experiment guide
- 12-month manufacturer's warranty (parts & labour from installation)
Ordering & Delivery
- Incoterms: CIF to destination seaport, FOB Mundra/Nhava Sheva, or Ex-Works Ambala
- Lead time: 3–5 weeks production + sea transit to destination
- Payment: LC (Letter of Credit) or T/T bank transfer against proforma invoice
- Documentation: commercial invoice, packing list, bill of lading, certificate of origin, insurance certificate
Frequently Asked Questions
Q: What is the Worm And Wheel Apparatus ProDynami - 1224 used for?
A: It is used to study the performance of a worm and wheel mechanism, including transmission ratio, torque, friction, self-locking, and efficiency.
Q: What materials are the worm and worm gear wheel made of?
A: The worm gear wheel is made of bronze, and the worm is made of steel.
Q: What transmission ratios does the apparatus offer?
A: The apparatus offers transmission ratios of 30:1 and 36:1.
Q: How are load and effort forces applied?
A: Load and effort forces are applied using pulleys connected to the worm and wheel mechanism, with cord and hangers.
Q: What weight sets are included with the apparatus?
A: Separate weight sets are included for the worm shaft (1x 0.5N hanger, 2x 0.5N, 2x 1N, 2x 2N, 2x 5N) and the worm wheel (1x 1N hanger, 1x 10N, 3x 20N).