Advanced Digital Electronics Trainer Kit
Model SC-DET 1304
The Advanced Digital Electronics Trainer Kit – SC-DET 1304 is a digital electronics trainer covering combinational and sequential logic, 8-bit ADC and DAC data conversion, and RAM memory. It has an interface for an external FPGA board, with I/O mapped to 16 switches and 16 LEDs. A 4-digit 7-segment display, pulsers, and a variable clock from 1 Hz to 100 kHz are included. An on-board breadboard with IC sockets lets students wire experiments on the trainer. Built-in +5 V and ±12 V supplies are short-circuit protected. It runs on 230 V AC and includes patch cords, a power cable, and a user manual with experiments.
The Advanced Digital Electronics Trainer Kit – SC-DET 1304 is a digital electronics trainer covering combinational and sequential logic, data conversion, and memory. It includes an interface for an FPGA board, and all experiments can be wired on the trainer itself.
Product Overview
The Advanced Digital Electronics Trainer Kit – SC-DET 1304 is a digital electronics trainer that covers combinational and sequential logic, data conversion, and memory. It runs from 230 V AC, 50 Hz. Built-in supplies are +5 V at 1 A and ±12 V DC, both short-circuit protected. Logic gates include AND, OR, NOT, NAND, NOR, XOR and XNOR, with universal gate realisation. Combinational circuits include multiplexers and demultiplexers, encoders and decoders, half and full adders, and magnitude comparators. Sequential circuits include SR, JK, D and T flip-flops, synchronous and asynchronous counters, and shift registers. Data conversion uses an 8-bit ADC and DAC. RAM read and write experiments are included. A header provides an interface to an external FPGA board, with I/O mapped to the switches and LEDs. The inputs and outputs include 16 logic switches, 16 LED indicators, a 4-digit 7-segment display, and pulsers. A variable clock runs from 1 Hz to 100 kHz, with a manual pulse option. An on-board breadboard area with IC sockets is provided. The kit includes a power cable, patch cords and connectors, and a user manual with experiments.
Advanced Digital Electronics Trainer Kit – SC-DET 1304: Technical Specifications
| Category | Specification |
|---|---|
| Power Input | 230 V AC, 50 Hz |
| Built-In Supplies | +5 V / 1 A; ±12 V DC; short-circuit protected |
| Logic Gates | AND, OR, NOT, NAND, NOR, XOR, XNOR; universal gate realisation |
| Combinational Circuits | MUX/DEMUX; encoder/decoder; half and full adders; magnitude comparator |
| Sequential Circuits | SR, JK, D and T flip-flops; synchronous and asynchronous counters; shift registers |
| Data Conversion | 8-bit ADC and DAC |
| Memory | RAM read and write experiments |
| FPGA Interface | Header for external FPGA board; I/O mapped to switches and LEDs |
| Logic Switches | 16 |
| LED Indicators | 16 |
| Display | 4-digit 7-segment |
| Pulsers | Included |
| Clock | Variable, 1 Hz–100 kHz; manual pulse |
| Breadboard | On-board area with IC sockets |
Key Features
- Full Logic Coverage: gates, combinational and sequential circuits
- Universal Gate Realisation: build all gate types from universal gates
- Data Conversion: 8-bit ADC and DAC on board
- Memory Experiments: RAM read and write
- FPGA Interface: header for external FPGA board with I/O mapping
- Built-In I/O: 16 switches, 16 LEDs, 4-digit 7-segment display and pulsers
- Variable Clock: 1 Hz–100 kHz with manual pulse
- On-Board Breadboard: IC sockets for wiring experiments
- Protected Supplies: +5 V / 1 A and ±12 V DC, short-circuit protected
Experiments
- Truth tables for AND, OR, NOT, NAND, NOR, XOR and XNOR gates
- Universal gate realisation using NAND and NOR gates
- Multiplexer and demultiplexer data routing
- Encoder and decoder operation
- Half adder and full adder design and testing
- Magnitude comparator operation
- SR, JK, D and T flip-flop characteristics
- Synchronous and asynchronous counter design
- Shift register serial and parallel operation
- 8-bit ADC and DAC conversion
- RAM read and write operation
- FPGA board connection and I/O mapping to switches and LEDs
- Clock-driven sequential circuit testing at variable frequency
Construction and Design
The Advanced Digital Electronics Trainer Kit – SC-DET 1304 has its switches, LEDs, 4-digit display, pulsers, clock, and breadboard area built into the trainer. The FPGA header connects to an external board and maps I/O to the switches and LEDs. Built-in supplies power the circuits, and IC sockets on the breadboard hold the logic devices.
Scope of Delivery
- Trainer kit
- Power cable
- Set of patch cords / connectors
- User manual with experiments
Q: What logic and sequential circuits are covered?
A: Gates (AND, OR, NOT, NAND, NOR, XOR and XNOR), multiplexers and demultiplexers, encoders and decoders, adders, comparators, SR, JK, D and T flip-flops, counters and shift registers.
Q: Can I connect an FPGA board?
A: Yes. A header provides an interface to an external FPGA board, with I/O mapped to the switches and LEDs.
Q: What inputs and outputs are provided?
A: 16 logic switches, 16 LED indicators, a 4-digit 7-segment display, and pulsers.
Q: What clock range is available?
A: A variable clock from 1 Hz to 100 kHz, with a manual pulse option.
Q: Do I need external wiring equipment?
A: No. The trainer has an on-board breadboard area with IC sockets, so all experiments can be wired on the trainer itself.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








