Gas Nozzle Pliers
Model SCTV 30
The Gas-Nozzle Pliers – SCTV 30 are welding pliers for 12 to 15 mm MIG/MAG gas nozzles. They remove, clean and refit nozzles that are stuck with spatter, cut welding wire, and support general torch maintenance. Care is needed to avoid damaging nozzle threads or the torch body.
The Gas-Nozzle Pliers – SCTV 30 are welding pliers for removing and fitting MIG/MAG gas nozzles, sized for 12 to 15 mm nozzles. They also cut wire and handle general torch maintenance.
Product Overview
The Gas-Nozzle Pliers – SCTV 30 are welding pliers designed for MIG/MAG gas nozzles in the 12 to 15 mm range. Spatter builds up on the gas nozzle during welding and can make it difficult to unscrew by hand. The pliers grip the nozzle firmly so it can be removed, cleaned or replaced, then refitted. The jaws also serve as a wire cutter for trimming the welding wire at the torch. Using the pliers for general torch maintenance helps keep the gas flow even and the torch in good working order. Because the jaws grip hard metal, care should be taken not to damage the nozzle threads or the torch body.
Gas-Nozzle Pliers – SCTV 30: Technical Specifications
| Category | Specification |
|---|---|
| Type | Welding pliers |
| Nozzle Size | Suitable for 12 to 15 mm MIG/MAG gas nozzles |
| Functions | Nozzle removal; wire cutting; general torch maintenance |
Key Features
- Nozzle Removal: grips 12 to 15 mm MIG/MAG gas nozzles
- Wire Cutting: trims welding wire at the torch
- Torch Maintenance: supports general torch upkeep
- Spatter Clearing: helps remove nozzles coated in spatter
Construction and Design
The Gas-Nozzle Pliers – SCTV 30 are welding pliers with jaws sized to grip 12 to 15 mm MIG/MAG gas nozzles. The jaws also serve as a wire cutter.
Q: What nozzle sizes do they fit?
A: 12 to 15 mm MIG/MAG gas nozzles.
Q: What are they used for?
A: Removing, cleaning and refitting gas nozzles, cutting welding wire, and general torch maintenance.
Q: Why are they needed for nozzles?
A: Spatter can build up on the nozzle and make it hard to unscrew by hand.
Q: Can they damage the torch?
A: The jaws grip hard metal, so care is needed to avoid damaging the nozzle threads or torch body.
Q: Can they cut wire?
A: Yes. The jaws can be used to trim welding wire at the torch.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








