🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Pipe Clamping Jaws

Model SCTV 38

The Pipe Clamping Jaws – SCTV 38 are a pair of curved jaws that hold pipes from 1 inch to 4 inches external diameter. They keep the pipe steady for cutting, fitting and welding, helping to maintain alignment and reduce slipping.

The Pipe Clamping Jaws – SCTV 38 are a pair of jaws for holding pipes securely during cutting, fitting and welding. They suit pipes with external diameters from 1 inch to 4 inches.

Product Overview

The Pipe Clamping Jaws – SCTV 38 are a pair of clamping jaws for holding round pipe steady in a vice or clamp. They are used during cutting, threading, fitting and welding, where a pipe must not roll or shift. The jaws accept external pipe diameters from 1 inch to 4 inches. Gripping the pipe firmly keeps the joint aligned while it is worked on, which helps achieve accurate fit-up and reduces the risk of slips or injury. The set is supplied as one pair. Because pipes are round, the jaws are shaped to grip the curved surface rather than a flat face.

Pipe Clamping Jaws – SCTV 38: Technical Specifications



Category Specification
Type Pipe clamping jaw set
Pipe Diameter Range External diameter 1 inch to 4 inches
Quantity 1 pair



Key Features

  • Pipe Gripping: shaped jaws hold round pipe securely
  • Wide Range: 1 inch to 4 inch external diameters
  • Pair Supplied: one pair of jaws
  • Stable Fit-Up: keeps the pipe still during cutting, fitting and welding

Construction and Design

The Pipe Clamping Jaws – SCTV 38 are a pair of curved jaws that grip the outside of the pipe. The curved faces suit round pipe in the 1 inch to 4 inch range.

Scope of Delivery

  • 1 pair of pipe clamping jaws

Q: What pipe sizes do they fit?
A: External diameters from 1 inch to 4 inches.

Q: How many are supplied?
A: One pair.

Q: What are they used for?
A: Holding pipe steady for cutting, fitting and welding.

Q: Why use jaws rather than a flat-faced vice grip?
A: The curved faces grip round pipe more securely and reduce the risk of the pipe slipping.

Q: What do they fit into?
A: A vice or clamp that accepts the jaws. The supplied data does not name a specific vice, so please confirm before publishing.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Pipe Clamping Jaws | SCTV 38 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Engineering College Workshop Training LabModel SCTV 38
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SCTV 38

Overview

The Pipe Clamping Jaws – SCTV 38 are a pair of jaws for holding pipes securely during cutting, fitting and welding. They suit pipes with external diameters from 1 inch to 4 inches.

Product Overview

The Pipe Clamping Jaws – SCTV 38 are a pair of clamping jaws for holding round pipe steady in a vice or clamp. They are used during cutting, threading, fitting and welding, where a pipe must not roll or shift. The jaws accept external pipe diameters from 1 inch to 4 inches. Gripping the pipe firmly keeps the joint aligned while it is worked on, which helps achieve accurate fit-up and reduces the risk of slips or injury. The set is supplied as one pair. Because pipes are round, the jaws are shaped to grip the curved surface rather than a flat face.

Key Features

Key Features

  • Pipe Gripping: shaped jaws hold round pipe securely
  • Wide Range: 1 inch to 4 inch external diameters
  • Pair Supplied: one pair of jaws
  • Stable Fit-Up: keeps the pipe still during cutting, fitting and welding

Construction and Design

The Pipe Clamping Jaws – SCTV 38 are a pair of curved jaws that grip the outside of the pipe. The curved faces suit round pipe in the 1 inch to 4 inch range.

Scope of Delivery

  • 1 pair of pipe clamping jaws

Specifications

Pipe Clamping Jaws – SCTV 38: Technical Specifications


Category Specification
Type Pipe clamping jaw set
Pipe Diameter Range External diameter 1 inch to 4 inches
Quantity 1 pair


Buying Pipe Clamping Jaws: Distributor & Tender Guidance

Pipe Clamping Jaws is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Pipe Clamping Jaws as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What pipe sizes do they fit? A: External diameters from 1 inch to 4 inches.

Q: How many are supplied? A: One pair.

Q: What are they used for? A: Holding pipe steady for cutting, fitting and welding.

Q: Why use jaws rather than a flat-faced vice grip? A: The curved faces grip round pipe more securely and reduce the risk of the pipe slipping.

Q: What do they fit into? A: A vice or clamp that accepts the jaws. The supplied data does not name a specific vice, so please confirm before publishing.

Related Guides & Resources

In-depth guides from Scientico on Engineering College Workshop Training Lab lab setup, experiments and procurement.

Pipe Clamping Jaws | SCTV 38

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Pillar Drill Machine 20 mm by Scientico IndiaPillar Drill Machine 20 mm | SCI-PDM-20Portable Hand Drill Machine 600W by Scientico IndiaPortable Hand Drill Machine 600W | SCI-PD-600Oxygen Steel Cylinder by Scientico IndiaOxygen Steel Cylinder | SCTV 09Rectangular Table by Scientico IndiaRectangular Table | SCTV 42Oxygen Regulator by Scientico IndiaOxygen Regulator | SCTV 11Roller Drawer Cabinet for Tools by Scientico IndiaRoller Drawer Cabinet for Tools | SCTV 36Oxy Acetylene Welding Goggles by Scientico IndiaOxy Acetylene Welding Goggles | SCTV 14Rutile-Cellulosic Coated Electrodes by Scientico IndiaRutile-Cellulosic Coated Electrodes | SCTV 23
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Pipe Clamping Jaws | SCTV 38