🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Magnetic Vice Jaws

Model SCTV 39

The Magnetic Vice Jaws – SCTV 39 are one pair of 150 mm extruded aluminium vice jaws with integrated permanent magnets. The magnets hold ferrous workpieces in place during set-up, and the aluminium faces are less likely to mark finished surfaces. They hold steel parts only, not non-magnetic metals.

The Magnetic Vice Jaws – SCTV 39 are a pair of extruded aluminium vice jaws with integrated permanent magnets. Each jaw is 150 mm wide, and the magnets hold ferrous parts in place while they are worked on.

Product Overview

The Magnetic Vice Jaws – SCTV 39 are one pair of vice jaws, each 150 mm wide, for fitting to a vice. The jaws are extruded aluminium, which keeps them light, and they have permanent magnets built in. The magnets hold steel and other ferrous workpieces against the jaw faces, so a part can be positioned before clamping and does not slip while being set up. This is useful for holding thin or small steel parts that are difficult to grip with conventional jaws. The aluminium faces are softer than steel, so they are less likely to mark finished surfaces. Magnetic jaws hold ferrous material only, so they do not grip non-magnetic metals such as aluminium or brass by magnetism.

Magnetic Vice Jaws – SCTV 39: Technical Specifications

Category Specification
Quantity 1 pair
Jaw Width 150 mm
Material Extruded aluminium
Magnets Integrated permanent magnets

Key Features

  • Integrated Magnets: hold ferrous workpieces against the jaw faces
  • 150 mm Jaws: one pair
  • Extruded Aluminium: lightweight jaw body
  • Softer Faces: less likely to mark finished surfaces
  • Positioning Aid: holds parts while they are set up

Construction and Design

The Magnetic Vice Jaws – SCTV 39 are extruded aluminium jaws with permanent magnets built into the jaw faces. Each jaw is 150 mm wide.

Scope of Delivery

  • 1 pair of magnetic vice jaws

Required for Operation

  • Vice that accepts 150 mm jaws

Q: What is the jaw width?
A: 150 mm.

Q: What are the jaws made from?
A: Extruded aluminium, with integrated permanent magnets.

Q: What can the magnets hold?
A: Ferrous workpieces such as steel. They do not hold non-magnetic metals such as aluminium or brass.

Q: Why use magnetic jaws?
A: They hold small or thin steel parts in place while they are positioned.

Q: Are the jaws supplied in a pair?
A: Yes. One pair is supplied.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Magnetic Vice Jaws | SCTV 39 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Engineering College Workshop Training LabModel SCTV 39
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SCTV 39

Overview

The Magnetic Vice Jaws – SCTV 39 are a pair of extruded aluminium vice jaws with integrated permanent magnets. Each jaw is 150 mm wide, and the magnets hold ferrous parts in place while they are worked on.

Product Overview

The Magnetic Vice Jaws – SCTV 39 are one pair of vice jaws, each 150 mm wide, for fitting to a vice. The jaws are extruded aluminium, which keeps them light, and they have permanent magnets built in. The magnets hold steel and other ferrous workpieces against the jaw faces, so a part can be positioned before clamping and does not slip while being set up. This is useful for holding thin or small steel parts that are difficult to grip with conventional jaws. The aluminium faces are softer than steel, so they are less likely to mark finished surfaces. Magnetic jaws hold ferrous material only, so they do not grip non-magnetic metals such as aluminium or brass by magnetism.

Key Features

Key Features

  • Integrated Magnets: hold ferrous workpieces against the jaw faces
  • 150 mm Jaws: one pair
  • Extruded Aluminium: lightweight jaw body
  • Softer Faces: less likely to mark finished surfaces
  • Positioning Aid: holds parts while they are set up

Construction and Design

The Magnetic Vice Jaws – SCTV 39 are extruded aluminium jaws with permanent magnets built into the jaw faces. Each jaw is 150 mm wide.

Scope of Delivery

  • 1 pair of magnetic vice jaws

Required for Operation

  • Vice that accepts 150 mm jaws

Specifications

Magnetic Vice Jaws – SCTV 39: Technical Specifications

Category Specification
Quantity 1 pair
Jaw Width 150 mm
Material Extruded aluminium
Magnets Integrated permanent magnets

Buying Magnetic Vice Jaws: Distributor & Tender Guidance

Magnetic Vice Jaws is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Magnetic Vice Jaws as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What is the jaw width? A: 150 mm.

Q: What are the jaws made from? A: Extruded aluminium, with integrated permanent magnets.

Q: What can the magnets hold? A: Ferrous workpieces such as steel. They do not hold non-magnetic metals such as aluminium or brass.

Q: Why use magnetic jaws? A: They hold small or thin steel parts in place while they are positioned.

Q: Are the jaws supplied in a pair? A: Yes. One pair is supplied.

Related Guides & Resources

In-depth guides from Scientico on Engineering College Workshop Training Lab lab setup, experiments and procurement.

Magnetic Vice Jaws | SCTV 39

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Magnetic MIG Torch Holder by Scientico IndiaMagnetic MIG Torch Holder | SCTV 25Manual Pipe Bending Machine by Scientico IndiaManual Pipe Bending Machine | SCI-PB-125Long Wall Whiteboard by Scientico IndiaLong Wall Whiteboard | SCTV 47Mobile Welding Fume Extraction Unit by Scientico IndiaMobile Welding Fume Extraction Unit | SCTV 16Leather Welding Apron by Scientico IndiaLeather Welding Apron | SCTV 27Multi-process Welding System by Scientico IndiaMulti-process Welding System | SCTV 17Insulating Sleeve by Scientico IndiaInsulating Sleeve | SCTV 18Nozzle Holder by Scientico IndiaNozzle Holder | SCTV 19
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Magnetic Vice Jaws | SCTV 39