🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Rectangular Table

Model SCTV 42

The Rectangular Table – SCTV 42 is a 2,000 × 800 × 750 mm workshop table with a 25 mm melamine-coated chipboard top, 3 mm plastic edging and rounded corners. A welded steel frame of round and rounded square tube is finished in chrome silver. Adjustable floor protectors level the table, and a mesh cable duct and cable outlet manage cables.

The Rectangular Table – SCTV 42 is a workshop table measuring 2,000 × 800 × 750 mm. It has a melamine-coated chipboard top and a welded steel frame in chrome silver. A mesh cable duct and cable outlet keep the wiring tidy.

Product Overview

The Rectangular Table – SCTV 42 is a rectangular workshop table measuring 2,000 × 800 × 750 mm (W × D × H). The tabletop is 25 mm thick three-layer E1 chipboard, melamine coated for an abrasion-resistant surface that is easy to clean. The edges have 3 mm plastic edging, and the corners are rounded to a radius of approximately 3 mm, which reduces chipping and makes the table safer to handle. The welded steel frame is built from round and rounded square tube profiles. It is epoxy or powder coated in chrome silver, or an equivalent finish, which protects the steel from corrosion. Adjustable floor protectors level the table on uneven floors and protect the floor surface. A mesh cable duct carries cables beneath the top, and a cable outlet brings them through to the work area. The table suits workshop, office and training use where a wide, stable work surface is needed.

Rectangular Table – SCTV 42: Technical Specifications

Category Specification
Dimensions (W x D x H) 2,000 x 800 x 750 mm
Tabletop 25 mm E1 three-layer chipboard, melamine-coated
Tabletop Abrasion Resistance High
Edging 3 mm plastic
Corner Radius Approximately 3 mm
Frame Welded steel; round and rounded square tube profiles
Frame Finish Epoxy or powder coated; chrome silver or equivalent
Levelling Adjustable floor protectors
Cable Management Mesh cable duct and cable outlet

Key Features

  • Wide Work Surface: 2,000 x 800 mm
  • Melamine Top: abrasion-resistant and easy to clean
  • 25 mm Chipboard Core: three-layer E1 construction
  • Edge Protection: 3 mm plastic edging with rounded corners
  • Welded Steel Frame: round and rounded square tube profiles
  • Chrome Silver Finish: epoxy or powder coated
  • Level Compensation: adjustable floor protectors
  • Cable Management: mesh duct and cable outlet

Experiments

Not applicable. This is a workshop table.

Construction and Design

The Rectangular Table – SCTV 42 has a melamine-coated chipboard top with plastic edging and rounded corners. The top sits on a welded steel frame of round and rounded square tube. A mesh cable duct runs beneath the top, and a cable outlet carries cables to the work area. Adjustable floor protectors are fitted under the frame.

Q: What are the table dimensions?
A: 2,000 × 800 × 750 mm (W × D × H).

Q: What is the tabletop made from?
A: 25 mm E1 three-layer chipboard, melamine coated, with 3 mm plastic edging.

Q: How is the frame finished?
A: Epoxy or powder coated in chrome silver, or an equivalent finish.

Q: How are cables managed?
A: A mesh cable duct runs beneath the top, with a cable outlet to the work area.

Q: Can the table be levelled?
A: Yes. Adjustable floor protectors compensate for uneven floors.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Rectangular Table | SCTV 42 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Engineering College Workshop Training LabModel SCTV 42
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SCTV 42

Overview

The Rectangular Table – SCTV 42 is a workshop table measuring 2,000 × 800 × 750 mm. It has a melamine-coated chipboard top and a welded steel frame in chrome silver. A mesh cable duct and cable outlet keep the wiring tidy.

Product Overview

The Rectangular Table – SCTV 42 is a rectangular workshop table measuring 2,000 × 800 × 750 mm (W × D × H). The tabletop is 25 mm thick three-layer E1 chipboard, melamine coated for an abrasion-resistant surface that is easy to clean. The edges have 3 mm plastic edging, and the corners are rounded to a radius of approximately 3 mm, which reduces chipping and makes the table safer to handle. The welded steel frame is built from round and rounded square tube profiles. It is epoxy or powder coated in chrome silver, or an equivalent finish, which protects the steel from corrosion. Adjustable floor protectors level the table on uneven floors and protect the floor surface. A mesh cable duct carries cables beneath the top, and a cable outlet brings them through to the work area. The table suits workshop, office and training use where a wide, stable work surface is needed.

Key Features

Key Features

  • Wide Work Surface: 2,000 x 800 mm
  • Melamine Top: abrasion-resistant and easy to clean
  • 25 mm Chipboard Core: three-layer E1 construction
  • Edge Protection: 3 mm plastic edging with rounded corners
  • Welded Steel Frame: round and rounded square tube profiles
  • Chrome Silver Finish: epoxy or powder coated
  • Level Compensation: adjustable floor protectors
  • Cable Management: mesh duct and cable outlet

Experiments

Not applicable. This is a workshop table.

Construction and Design

The Rectangular Table – SCTV 42 has a melamine-coated chipboard top with plastic edging and rounded corners. The top sits on a welded steel frame of round and rounded square tube. A mesh cable duct runs beneath the top, and a cable outlet carries cables to the work area. Adjustable floor protectors are fitted under the frame.

Specifications

Rectangular Table – SCTV 42: Technical Specifications

Category Specification
Dimensions (W x D x H) 2,000 x 800 x 750 mm
Tabletop 25 mm E1 three-layer chipboard, melamine-coated
Tabletop Abrasion Resistance High
Edging 3 mm plastic
Corner Radius Approximately 3 mm
Frame Welded steel; round and rounded square tube profiles
Frame Finish Epoxy or powder coated; chrome silver or equivalent
Levelling Adjustable floor protectors
Cable Management Mesh cable duct and cable outlet

Buying Rectangular Table: Distributor & Tender Guidance

Rectangular Table is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Rectangular Table as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What are the table dimensions? A: 2,000 × 800 × 750 mm (W × D × H).

Q: What is the tabletop made from? A: 25 mm E1 three-layer chipboard, melamine coated, with 3 mm plastic edging.

Q: How is the frame finished? A: Epoxy or powder coated in chrome silver, or an equivalent finish.

Q: How are cables managed? A: A mesh cable duct runs beneath the top, with a cable outlet to the work area.

Q: Can the table be levelled? A: Yes. Adjustable floor protectors compensate for uneven floors.

Related Guides & Resources

In-depth guides from Scientico on Engineering College Workshop Training Lab lab setup, experiments and procurement.

Rectangular Table | SCTV 42

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Portable Hand Drill Machine 600W by Scientico IndiaPortable Hand Drill Machine 600W | SCI-PD-600Roller Drawer Cabinet for Tools by Scientico IndiaRoller Drawer Cabinet for Tools | SCTV 36Pipe Clamping Jaws by Scientico IndiaPipe Clamping Jaws | SCTV 38Rutile-Cellulosic Coated Electrodes by Scientico IndiaRutile-Cellulosic Coated Electrodes | SCTV 23Pillar Drill Machine 20 mm by Scientico IndiaPillar Drill Machine 20 mm | SCI-PDM-20Sheet Rolling Machine 50 inch by Scientico IndiaSheet Rolling Machine 50 inch | SCI-SR-502Oxygen Steel Cylinder by Scientico IndiaOxygen Steel Cylinder | SCTV 09Socket Set by Scientico IndiaSocket Set | SCTV 05
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Rectangular Table | SCTV 42