California Bearing Ratio (CBR) Test Machine
Model STL 209
California Bearing Ratio (CBR) Test Machine STL 209 is an electric CBR and Marshall load frame for laboratory use.
It has loading speeds of 0.05 in./min for CBR and 2 in./min for Marshall testing.
Two proving rings cover 50 KN and 10 KN capacities with calibration certificates.
The machine stops and alarms at the extreme up or down position.
It includes CBR molds, surcharge weights, swell plates, and a 25 mm penetration dial gauge.
The California Bearing Ratio (CBR) Test Machine is used in laboratories to assess the CBR value of materials. It also performs Marshall tests. It is an electric unit with two loading speeds, one for CBR and one for Marshall testing.
Product Overview
The California Bearing Ratio (CBR) Test Machine is an electric CBR and Marshall load frame. It has two loading speeds: 0.05 in./min for the CBR test (AASHTO T-193) and 2 in./min for the Marshall test (AASHTO T-245). The speed change is electrical, using a simple switch. The machine stops and gives an alarm at the extreme up or down position. The kit includes two proving rings, a CBR penetration plunger, a penetration dial gauge, CBR molds, spacer disks, surcharge weights, expansion measuring apparatus, and filter paper.
California Bearing Ratio (CBR) Test Machine STL 209: Technical Specifications
| Parameter | Value |
|---|---|
| Application | CBR value assessment and Marshall test |
| Operation | Electric |
| Loading Speed, CBR | 0.05 in./min (AASHTO T-193) |
| Loading Speed, Marshall | 2 in./min (AASHTO T-245) |
| Speed Change | Electrical, simple switch |
| Unloading Speed | Fast |
| Auto Stop and Alarm | At extreme up or down position |
| Proving Ring 1 Capacity | Minimum 50 KN |
| Proving Ring 1 Readability | 0.04 KN/div |
| Proving Ring 2 Capacity | Minimum 10 KN |
| Proving Ring 2 Readability | 0.01 KN/div |
| Proving Ring Dial Gauge Division | Minimum 0.002 mm (or 0.0001 in) |
| CBR Penetration Plunger Diameter | 1.954 ± 0.005 in. (49.63 ± 0.13 mm) |
| CBR Penetration Plunger Length | Not less than 8 in. (203 mm) |
| Penetration Dial Gauge Travel | 25 mm |
| Penetration Dial Gauge Division | Minimum 0.01 mm |
| CBR Mold Internal Diameter | 6 +0.026 in. (152.4 +0.66 mm) |
| CBR Mold Height | 7 +0.026 in. (177.8 +0.66 mm) |
| CBR Mold Extension Collar Height | 2 in. (51 mm) |
| CBR Mold Set | 3 molds |
| Spacer Disk Diameter | 5.9375 +0.03125 in. (150.8 ± 0.8 mm) |
| Spacer Disk Height | 2.416 ± 0.005 in. (61.4 ± 0.1 mm) |
| Annular Surcharge Weight Diameter | 5.875 in. (149.2 mm) |
| Annular Surcharge Weight | 5 ± 0.10 lb (2.27 ± 0.04 kg), 3 nos. |
| Annular Surcharge Center Hole Diameter | 2.125 in. (54.0 mm) |
| Slotted Surcharge Weight Diameter | 5.875 in. (149.2 mm) |
| Slotted Surcharge Weight | 5 ± 0.10 lb (2.27 ± 0.04 kg), 3 nos. |
| Swell Plate Diameter | 5.875 in. (149.2 mm), 3 nos. |
| Swell Plate Perforation | 1/16 in. (1.6 mm) holes |
| Tripod and Dial Gauge | 3 nos., 25 mm travel, 0.01 mm division |
| Filter Paper | 3 boxes, 100 sheets per box, 150 mm |
Technical Data
- Loading Frame
- Speed 1: 0.05 in./min for CBR test (AASHTO T-193)
- Speed 2: 2 in./min for Marshall test (AASHTO T-245)
- Speed change: electrical, simple switch
- Unloading speed: fast
- Speed: constant and vibration free during testing
- Automatic stop and alarm at extreme up or down position
- Proving ring fixing provision included
- Proving Rings (2 nos.)
- Ring 1: minimum 50 KN capacity, 0.04 KN/div readability
- Ring 2: minimum 10 KN capacity, 0.01 KN/div readability
- Dial gauge division: minimum 0.002 mm (or 0.0001 in)
- Upper and lower attachments included
- Calibration certificates included, with dial gauge serial number and manufacturer name
- CBR Penetration Plunger
- Material: non-rusting metal, circular cross-section
- Diameter: 1.954 ± 0.005 in. (49.63 ± 0.13 mm)
- Length: not less than 8 in. (203 mm)
- Fixes to each proving ring
- Penetration Dial Gauge
- Travel: 25 mm
- Minimum division: 0.01 mm
- Extendable plunger length
- Fixing arrangement adjustable for height, anvil placed over mold side
- CBR Mold
- Material: galvanised metal
- Internal diameter: 6 +0.026 in. (152.4 +0.66 mm)
- Height: 7 +0.026 in. (177.8 +0.66 mm)
- Extension collar: 2 in. (51 mm) height
- Perforated base plate: 1/16 in. (1.6 mm) holes, fits either end
- Set: 3 molds
- Spacer Disk
- Material: galvanised
- Diameter: 5.9375 +0.03125 in. (150.8 ± 0.8 mm)
- Height: 2.416 ± 0.005 in. (61.4 ± 0.1 mm)
- Set: 1 disk
- Surcharge Weights
- Annular: 3 nos., 5.875 in. (149.2 mm) diameter, 5 ± 0.10 lb (2.27 ± 0.04 kg), 2.125 in. (54.0 mm) center hole
- Slotted: 3 nos., 5.875 in. (149.2 mm) diameter, 5 ± 0.10 lb (2.27 ± 0.04 kg)
- Material: metallic and galvanised
- Expansion Measuring Apparatus
- Swell plate: 3 nos., 5.875 in. (149.2 mm) diameter, adjustable stem
- Perforations: 1/16 in. (1.6 mm)
- Tripod with dial gauge: 3 nos., 25 mm travel, 0.01 mm division
- Filter Paper
- Boxes: 3
- Sheets per box: 100
- Size: 150 mm
Key Features
- CBR Testing: AASHTO T-193 loading at 0.05 in./min
- Marshall Testing: AASHTO T-245 loading at 2 in./min
- Speed Change: electrical, simple switch
- Auto Stop: alarm at extreme up or down position
- Proving Rings: 50 KN and 10 KN capacities
- Penetration Dial Gauge: 25 mm travel, 0.01 mm division
- Accessories: CBR molds, spacer disk, surcharge weights, swell plates
Experiments
CBR value assessment of materials (AASHTO T-193) and Marshall test (AASHTO T-245).
Construction and Design
The California Bearing Ratio (CBR) Test Machine has a loading frame with constant, vibration free speed. The proving rings attach to the load frame with upper and lower attachments. The CBR penetration plunger fixes to each proving ring. The CBR molds are galvanised metal.
Scope of Delivery
- Electric CBR/Marshall load frame with two loading speeds
- Proving ring, 50 KN capacity, 0.04 KN/div, with calibration certificate
- Proving ring, 10 KN capacity, 0.01 KN/div, with calibration certificate
- Upper and lower attachments for proving rings
- CBR penetration plunger, non-rusting metal, 49.63 mm diameter
- Penetration dial gauge, 25 mm travel, 0.01 mm division
- CBR molds, galvanised, set of 3, with 51 mm extension collar and perforated base plate
- Spacer disk, galvanised, set of 1
- Annular surcharge weights, set of 3
- Slotted surcharge weights, set of 3
- Arrangement for penetration measurement with clamp and adjustable fixings
- Swell plates with adjustable stem, set of 3
- Tripods with dial gauges, set of 3
- Filter paper, 3 boxes of 100 sheets, 150 mm
What loading speeds does the machine have?
It has 0.05 in./min for the CBR test (AASHTO T-193) and 2 in./min for the Marshall test (AASHTO T-245).
What proving rings are supplied?
Two proving rings are supplied: one with a minimum 50 KN capacity and 0.04 KN/div readability, and one with a minimum 10 KN capacity and 0.01 KN/div readability.
How is the speed changed?
The speed is changed electrically using a simple switch.
What happens at the end of travel?
The machine stops automatically and gives an alarm at the extreme up or down position.
What tests can this machine perform?
It is used for CBR value assessment and the Marshall test.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








