🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Gas Nozzle Pliers

Model SCTV 30

The Gas-Nozzle Pliers – SCTV 30 are welding pliers for 12 to 15 mm MIG/MAG gas nozzles. They remove, clean and refit nozzles that are stuck with spatter, cut welding wire, and support general torch maintenance. Care is needed to avoid damaging nozzle threads or the torch body.

The Gas-Nozzle Pliers – SCTV 30 are welding pliers for removing and fitting MIG/MAG gas nozzles, sized for 12 to 15 mm nozzles. They also cut wire and handle general torch maintenance.

Product Overview

The Gas-Nozzle Pliers – SCTV 30 are welding pliers designed for MIG/MAG gas nozzles in the 12 to 15 mm range. Spatter builds up on the gas nozzle during welding and can make it difficult to unscrew by hand. The pliers grip the nozzle firmly so it can be removed, cleaned or replaced, then refitted. The jaws also serve as a wire cutter for trimming the welding wire at the torch. Using the pliers for general torch maintenance helps keep the gas flow even and the torch in good working order. Because the jaws grip hard metal, care should be taken not to damage the nozzle threads or the torch body.

Gas-Nozzle Pliers – SCTV 30: Technical Specifications

Category Specification
Type Welding pliers
Nozzle Size Suitable for 12 to 15 mm MIG/MAG gas nozzles
Functions Nozzle removal; wire cutting; general torch maintenance

Key Features

  • Nozzle Removal: grips 12 to 15 mm MIG/MAG gas nozzles
  • Wire Cutting: trims welding wire at the torch
  • Torch Maintenance: supports general torch upkeep
  • Spatter Clearing: helps remove nozzles coated in spatter

Construction and Design

The Gas-Nozzle Pliers – SCTV 30 are welding pliers with jaws sized to grip 12 to 15 mm MIG/MAG gas nozzles. The jaws also serve as a wire cutter.

Q: What nozzle sizes do they fit?
A: 12 to 15 mm MIG/MAG gas nozzles.

Q: What are they used for?
A: Removing, cleaning and refitting gas nozzles, cutting welding wire, and general torch maintenance.

Q: Why are they needed for nozzles?
A: Spatter can build up on the nozzle and make it hard to unscrew by hand.

Q: Can they damage the torch?
A: The jaws grip hard metal, so care is needed to avoid damaging the nozzle threads or torch body.

Q: Can they cut wire?
A: Yes. The jaws can be used to trim welding wire at the torch.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Gas Nozzle Pliers | SCTV 30 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Engineering College Workshop Training LabModel SCTV 30
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SCTV 30

Overview

The Gas-Nozzle Pliers – SCTV 30 are welding pliers for removing and fitting MIG/MAG gas nozzles, sized for 12 to 15 mm nozzles. They also cut wire and handle general torch maintenance.

Product Overview

The Gas-Nozzle Pliers – SCTV 30 are welding pliers designed for MIG/MAG gas nozzles in the 12 to 15 mm range. Spatter builds up on the gas nozzle during welding and can make it difficult to unscrew by hand. The pliers grip the nozzle firmly so it can be removed, cleaned or replaced, then refitted. The jaws also serve as a wire cutter for trimming the welding wire at the torch. Using the pliers for general torch maintenance helps keep the gas flow even and the torch in good working order. Because the jaws grip hard metal, care should be taken not to damage the nozzle threads or the torch body.

Key Features

Key Features

  • Nozzle Removal: grips 12 to 15 mm MIG/MAG gas nozzles
  • Wire Cutting: trims welding wire at the torch
  • Torch Maintenance: supports general torch upkeep
  • Spatter Clearing: helps remove nozzles coated in spatter

Construction and Design

The Gas-Nozzle Pliers – SCTV 30 are welding pliers with jaws sized to grip 12 to 15 mm MIG/MAG gas nozzles. The jaws also serve as a wire cutter.

Specifications

Gas-Nozzle Pliers – SCTV 30: Technical Specifications

Category Specification
Type Welding pliers
Nozzle Size Suitable for 12 to 15 mm MIG/MAG gas nozzles
Functions Nozzle removal; wire cutting; general torch maintenance

Buying Gas Nozzle Pliers: Distributor & Tender Guidance

Gas Nozzle Pliers is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Gas Nozzle Pliers as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What nozzle sizes do they fit? A: 12 to 15 mm MIG/MAG gas nozzles.

Q: What are they used for? A: Removing, cleaning and refitting gas nozzles, cutting welding wire, and general torch maintenance.

Q: Why are they needed for nozzles? A: Spatter can build up on the nozzle and make it hard to unscrew by hand.

Q: Can they damage the torch? A: The jaws grip hard metal, so care is needed to avoid damaging the nozzle threads or torch body.

Q: Can they cut wire? A: Yes. The jaws can be used to trim welding wire at the torch.

Related Guides & Resources

In-depth guides from Scientico on Engineering College Workshop Training Lab lab setup, experiments and procurement.

Gas Nozzle Pliers | SCTV 30

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Gas Nozzle by Scientico IndiaGas Nozzle | SCTV 21Gear Hobbing Machine by Scientico IndiaGear Hobbing Machine | SCI-GH-75Contact Tip by Scientico IndiaContact Tip | SCTV 20Height Adjuster for Bench Vice by Scientico IndiaHeight Adjuster for Bench Vice | SCTV 48Computer Table by Scientico IndiaComputer Table | SCTV 41Insulating Sleeve by Scientico IndiaInsulating Sleeve | SCTV 18CO2 Steel Cylinder by Scientico IndiaCO2 Steel Cylinder | SCTV 07Leather Welding Apron by Scientico IndiaLeather Welding Apron | SCTV 27
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Gas Nozzle Pliers | SCTV 30