Magnetic Powder Brake with Torque and Speed Measurement
Model SC-MPB 1079
The Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079 is a 1 kW brake with 0.5–5 Nm braking torque and speeds up to 3,000 rpm. It includes a strain-gauge torsion bar for torque (0–10 Nm, ±1 percent) and an optical encoder for speed (60 PPR). Torque and speed are output as 0–10 V signals. An excitation controller provides constant-torque and constant-speed modes. The brake is forced-air cooled, with 1 kW continuous and 1.5 kW for 10 minutes. A calibration certificate, English manual, and wiring diagrams are included. It complies with IEC/EN 60034, IEC 61010-1, and CE standards.
The Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079 is a 1 kW brake for loading rotating machines. It measures torque and speed and is controlled with an excitation controller that supports constant-torque and constant-speed modes.
Product Overview
The Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079 is rated at 1 kW, with braking torque from 0.5 to 5 Nm and speeds up to 3,000 rpm. Thermal rating is 1 kW continuous, 1.5 kW for 10 minutes, with forced-air cooling. It runs at 100 percent duty at full torque up to 1,500 rpm. Excitation is 0–24 V DC, up to 2 A. Torque is measured by a strain-gauge torsion bar rated 0–10 Nm, ±1 percent. Speed is measured by an optical encoder from 0 to 3,000 rpm with 1 rpm resolution and 60 PPR. Torque and speed signals are output as 0–10 V on 4 mm sockets. The excitation controller provides a torque setpoint, with constant-torque and constant-speed modes, and runs on 230 V, 50–60 Hz. The unit has two shaft ends, an aluminium base, and a flexible coupling. It is class F and IP20, and complies with IEC/EN 60034, IEC 61010-1, and CE standards. A calibration certificate and English manual with wiring diagrams are supplied.
Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079: Technical Specifications
| Category | Specification |
|---|---|
| Power Rating | 1 kW |
| Braking Torque | 0.5–5 Nm |
| Maximum Speed | 3,000 rpm |
| Thermal Rating | 1 kW continuous; 1.5 kW for 10 min |
| Duty Cycle | 100% duty at full torque up to 1,500 rpm |
| Cooling | Forced-air |
| Excitation | 0–24 V DC, up to 2 A |
| Torque Measurement | Strain-gauge torsion bar, 0–10 Nm, ±1% |
| Speed Measurement | Optical encoder, 0–3,000 rpm, 1 rpm resolution, 60 PPR |
| Signal Outputs | Torque 0–10 V; speed 0–10 V on 4 mm sockets |
| Controller | Excitation controller with torque setpoint; constant-torque and constant-speed modes |
| Controller Supply | 230 V, 50–60 Hz |
| Shaft | Two ends; flexible coupling |
| Base | Aluminium |
| Insulation Class | F |
| Enclosure | IP20 |
| Standards | IEC/EN 60034; IEC 61010-1; documentation reviewed per model |
| Calibration | Calibration certificate supplied |
Key Features
- Magnetic Powder Brake: 1 kW braking with 0.5–5 Nm torque range
- Integrated Torque Sensing: strain-gauge torsion bar, 0–10 Nm, ±1%
- Integrated Speed Sensing: optical encoder, 60 PPR, 1 rpm resolution
- Analogue Outputs: torque and speed on 0–10 V signals
- Two Control Modes: constant-torque and constant-speed operation
- Torque Setpoint: excitation controller with direct torque adjustment
- Forced-Air Cooling: 1 kW continuous, 1.5 kW for 10 minutes
- Full-Torque Duty: 100% duty at full torque up to 1,500 rpm
- Calibration Certificate: supplied with the unit
- Compliance: IEC/EN 60034, IEC 61010-1, CE standards
Experiments
- Torque-speed characteristic of a motor under variable braking load
- Constant-torque loading and speed response observation
- Constant-speed control and torque response observation
- Measurement of motor output power from torque and speed
- Efficiency measurement of a motor at different load points
- Torque calibration check against the torsion bar reference
- Speed measurement using optical encoder pulses
- Dynamic response of motor to load step changes
- Thermal behaviour during sustained braking at full torque
- Comparison of torque and speed signals using 0–10 V outputs
Construction and Design
The Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079 has two shaft ends connected by a flexible coupling. The brake mounts on an aluminium base. A strain-gauge torsion bar measures torque, and an optical encoder measures speed. Excitation is supplied at 0–24 V DC through the controller. Forced-air cooling is fitted to manage heat during braking. Torque and speed signals are routed to 4 mm sockets as 0–10 V outputs.
Scope of Delivery
- Powder brake with torque and speed sensors
- Excitation controller
- Calibration certificate
- English manual and wiring diagrams
Q: What is the braking torque range?
A: The Magnetic Powder Brake with Torque and Speed Measurement – SC-MPB 1079 provides braking torque from 0.5 to 5 Nm, up to 3,000 rpm.
Q: How are torque and speed measured?
A: Torque is measured by a strain-gauge torsion bar rated 0–10 Nm, ±1 percent. Speed is measured by an optical encoder from 0 to 3,000 rpm with 1 rpm resolution and 60 PPR.
Q: What control modes are available?
A: The excitation controller offers constant-torque and constant-speed modes, with a torque setpoint for direct adjustment.
Q: How are the measurement signals output?
A: Torque and speed are output as 0–10 V signals on 4 mm sockets.
Q: What is the thermal rating?
A: The brake is rated at 1 kW continuous and 1.5 kW for 10 minutes, with forced-air cooling. It runs at 100 percent duty at full torque up to 1,500 rpm.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








