🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

DC-DC Converter Trainer Panel

Model SC-DCC 2121

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular trainer for Buck, Boost and Buck-Boost converters. It uses PWM control with adjustable duty cycle from 0 to 95%, and voltage feedback for closed-loop operation. Input and output voltage and current meters are fitted, with overcurrent and short-circuit protection. Test points for the gate, inductor current and output support waveform observation. The panel comes with patch cords and a user manual with experiments.

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular trainer for Buck, Boost and Buck-Boost DC-DC converters. It features PWM control and closed-loop voltage regulation.

Product Overview

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular trainer for Buck, Boost and Buck-Boost DC-DC converters. PWM control provides an adjustable duty cycle from 0 to 95 percent. Voltage feedback enables closed-loop operation. Input and output voltage and current are shown on meters. Overcurrent and short-circuit protection are included. Test points for the gate, inductor current, and output allow each stage to be observed. The supply includes the trainer panel, patch cords, and a user manual with experiments.

DC-DC Converter Trainer Panel – SC-DCC 2121: Technical Specifications

Category Specification
Topologies Buck; Boost; Buck-Boost
Control PWM with adjustable duty cycle, 0–95%
Closed Loop Voltage feedback
Measurement Input and output voltage and current meters
Protection Overcurrent and short-circuit
Test Points Gate; inductor current; output

Key Features

  • Three Topologies: Buck, Boost and Buck-Boost converters
  • PWM Control: adjustable duty cycle from 0 to 95%
  • Closed-Loop Operation: voltage feedback control
  • Metering: input and output voltage and current meters
  • Protection: overcurrent and short-circuit
  • Test Points: gate, inductor current and output

Experiments

  • Buck converter operation and output voltage control with duty cycle
  • Boost converter operation and step-up voltage measurement
  • Buck-Boost converter operation and polarity behaviour
  • Effect of duty cycle from 0 to 95% on output voltage
  • Closed-loop voltage regulation with feedback
  • Gate signal and PWM waveform observation
  • Inductor current waveform measurement
  • Input and output power and efficiency calculation
  • Overcurrent and short-circuit protection response

Construction and Design

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular panel. The Buck, Boost and Buck-Boost converter stages connect through patch cords. The PWM controller, feedback circuit, and metering are mounted on the panel. Test points for the gate, inductor current, and output are fitted for waveform observation.

Scope of Delivery

  • DC-DC converter trainer panel
  • Patch cords
  • User manual with experiment

Q: Which converter topologies are included?
A: Buck, Boost and Buck-Boost DC-DC converters.

Q: What duty cycle range is available?
A: The PWM control has an adjustable duty cycle from 0 to 95%.

Q: Does the trainer support closed-loop control?
A: Yes. Voltage feedback provides closed-loop operation.

Q: What protection is provided?
A: Overcurrent and short-circuit protection.

Q: Where can I observe waveforms?
A: Test points are provided for the gate, inductor current and output.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture DC-DC Converter Trainer Panel | SC-DCC 2121 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Electronics and ElectricalModel SC-DCC 2121
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SC-DCC 2121

Overview

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular trainer for Buck, Boost and Buck-Boost DC-DC converters. It features PWM control and closed-loop voltage regulation.

Product Overview

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular trainer for Buck, Boost and Buck-Boost DC-DC converters. PWM control provides an adjustable duty cycle from 0 to 95 percent. Voltage feedback enables closed-loop operation. Input and output voltage and current are shown on meters. Overcurrent and short-circuit protection are included. Test points for the gate, inductor current, and output allow each stage to be observed. The supply includes the trainer panel, patch cords, and a user manual with experiments.

Key Features

Key Features

  • Three Topologies: Buck, Boost and Buck-Boost converters
  • PWM Control: adjustable duty cycle from 0 to 95%
  • Closed-Loop Operation: voltage feedback control
  • Metering: input and output voltage and current meters
  • Protection: overcurrent and short-circuit
  • Test Points: gate, inductor current and output

Experiments

  • Buck converter operation and output voltage control with duty cycle
  • Boost converter operation and step-up voltage measurement
  • Buck-Boost converter operation and polarity behaviour
  • Effect of duty cycle from 0 to 95% on output voltage
  • Closed-loop voltage regulation with feedback
  • Gate signal and PWM waveform observation
  • Inductor current waveform measurement
  • Input and output power and efficiency calculation
  • Overcurrent and short-circuit protection response

Construction and Design

The DC-DC Converter Trainer Panel – SC-DCC 2121 is a modular panel. The Buck, Boost and Buck-Boost converter stages connect through patch cords. The PWM controller, feedback circuit, and metering are mounted on the panel. Test points for the gate, inductor current, and output are fitted for waveform observation.

Scope of Delivery

  • DC-DC converter trainer panel
  • Patch cords
  • User manual with experiment

Specifications

DC-DC Converter Trainer Panel – SC-DCC 2121: Technical Specifications

Category Specification
Topologies Buck; Boost; Buck-Boost
Control PWM with adjustable duty cycle, 0–95%
Closed Loop Voltage feedback
Measurement Input and output voltage and current meters
Protection Overcurrent and short-circuit
Test Points Gate; inductor current; output

Buying DC-DC Converter Trainer Panel: Distributor & Tender Guidance

DC-DC Converter Trainer Panel is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep DC-DC Converter Trainer Panel as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: Which converter topologies are included? A: Buck, Boost and Buck-Boost DC-DC converters.

Q: What duty cycle range is available? A: The PWM control has an adjustable duty cycle from 0 to 95%.

Q: Does the trainer support closed-loop control? A: Yes. Voltage feedback provides closed-loop operation.

Q: What protection is provided? A: Overcurrent and short-circuit protection.

Q: Where can I observe waveforms? A: Test points are provided for the gate, inductor current and output.

Related Guides & Resources

In-depth guides from Scientico on Electronics and Electrical lab setup, experiments and procurement.

DC-DC Converter Trainer Panel | SC-DCC 2121

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

DC compound motor training unitDC Compound Wound Machine Trainer | EL 1020Digital Communication Trainer Kit by Scientico IndiaDigital Communication Trainer Kit | SC-DCT 1607Computer and Accessories for Industrial SCADA Workstation by Scientico IndiaComputer and Accessories for Industrial SCADA Workstation | SC-SCW 1218Four-quadrant servo test systemDynamic Servo Machine Test System Trainer | EL 2041Automatic Motor Coil Winding Machine by Scientico IndiaAutomatic Motor Coil Winding Machine | SC-CWM 1200Electrical Machines Set Trainer Panel by Scientico IndiaElectrical Machines Set Trainer Panel | SC-EMS 1900Analogue Communication Trainer Kit by Scientico IndiaAnalogue Communication Trainer Kit | SC-ACT 1506Function or Arbitrary Waveform Generator by Scientico IndiaFunction or Arbitrary Waveform Generator | SC-FGA 2020
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

DC-DC Converter Trainer Panel | SC-DCC 2121