🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Flash and Fire Point Tester of Bitumen

Model STL 205

Flash and Fire Point Tester of Bitumen is a Cleveland open-cup tester for bitumen.
It uses an electric heater rated at least 450°C with stepless variable control.
The test cup is brass with a 62.5 to 64 mm inside diameter and a 32.5 to 34 mm inside depth.
The test flame is adjusted with a built-in needle valve and includes a complete gas supply.
It operates on 220 V, 50 Hz and includes a digital thermometer rated to at least 400°C.

The Flash and Fire Point Tester of Bitumen determines flash and fire points of bitumen by the Cleveland open-cup method. It uses an electrically operated heater with a variable voltage transformer for controlled heating.

Product Overview

The Flash and Fire Point Tester of Bitumen is an open-cup type tester built to the Cleveland open-cup method. The body is made of brass or a non-rusting metal of equivalent heat conductivity. It has an electric heater with a rheostat type heater switch and a nickel-chromium heater element. The heater uses stepless variable control. The unit includes a thermometer holder with a flash point platform. The thermometer position is adjustable and can be raised out of the way to place and remove the test cup. The test flame is adjusted through a built-in needle valve.

Flash and Fire Point Tester of Bitumen STL 205: Technical Specifications

Parameter Value
Test Method Cleveland open-cup method
Heater Power Supply 220 V AC
Heater Temperature At least 450°C
Heater Temperature Control Variable voltage transformer
Heater Material Nickel-chromium
Heater Control Type Stepless variable
Heater Power Rating 1250 W (220 V)
Test Cup Material Brass
Test Cup Inside Diameter 62.5 to 64 mm
Test Cup Outside Diameter 67.5 to 69 mm
Test Cup Inside Depth 32.5 to 34 mm
Test Cup Bottom Thickness 2.8 to 3.6 mm
Filling Mark Position 9 to 10 mm from top edge
Test Flame Nozzle Tip Diameter 1.6 to 5 mm
Test Flame Orifice Diameter Approximately 0.8 mm
Test Flame Swing Radius Minimum 150 mm
Orifice Center Height Not more than 2.5 mm above cup edge
Thermometer Range At least 400°C
Power Supply 220 V, 50 Hz

Technical Data

  • Heating Arrangement
    • Electrically operated heater: 220 V AC
    • Heater temperature: at least 450°C
    • Temperature control: variable voltage transformer
    • Heating plate and frame/support stand included
    • Thermometer fixed at center, depth adjustable
  • Test Cup
    • Material: brass
    • Inside diameter: 62.5 to 64 mm
    • Outside diameter: 67.5 to 69 mm
    • Inside depth: 32.5 to 34 mm
    • Bottom thickness: 2.8 to 3.6 mm
    • Filling mark: 9 to 10 mm from top edge
    • Flat shelf on outside included
  • Test Flame Applicator and Gas Supply
    • Nozzle tip diameter: 1.6 to 5 mm
    • Orifice diameter: approximately 0.8 mm
    • Swing radius: minimum 150 mm
    • Orifice center: not more than 2.5 mm above cup edge
    • Complete gas supply mechanism with controlling valve and pipe
  • Thermometer
    • Range: at least 400°C
    • Type: mercury, digital thermometer complying with ASTM 11C and IP 28C
    • Unit: Celsius
  • Power Supply
    • 220 V, 50 Hz

Key Features

  • Flash Point Testing: Cleveland open-cup method for bitumen
  • Heater Temperature: at least 450°C with stepless variable control
  • Heater Element: nickel-chromium
  • Heater Power: 1250 W (220 V)
  • Test Flame: adjusted through built-in needle valve
  • Thermometer Holder: adjustable position, raises out of the way
  • Body Material: brass or non-rusting metal of equivalent heat conductivity

Experiments

Flash point and fire point determination of bitumen by the Cleveland open-cup method.

Construction and Design

The Flash and Fire Point Tester of Bitumen has a brass or non-rusting metal body. It uses a nickel-chromium heater with stepless variable control. The thermometer holder includes a flash point platform. The test flame is adjusted with a built-in needle valve.

Software

No software is included.

Scope of Delivery

  • Clamps
  • Shell
  • Heater 1250 W (220 V)
  • Wattstat
  • Receptacle (110 V)
  • Switch
  • Flash cup
  • Test flame burner
  • Thermometer support
  • Heating plate support
  • Digital thermometer complying with ASTM 11C and IP 28C, mercury type, in Celsius
  • Gas cylinder (common type available in the market), connection, controlling valve, and pipe

What test method does the tester use?
It uses the Cleveland open-cup method.

What is the maximum heater temperature?
The heater reaches at least 450°C.

How is the test flame adjusted?
The test flame is adjusted through a built-in needle valve.

Can the thermometer be moved out of the way?
Yes. The thermometer can be raised out of the way to place and remove the test cup.

What is the power supply?
It runs on 220 V, 50 Hz.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Flash and Fire Point Tester of Bitumen | STL 205 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Civil Engineering Training EquipmentModel STL 205
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
STL 205

Overview

The Flash and Fire Point Tester of Bitumen determines flash and fire points of bitumen by the Cleveland open-cup method. It uses an electrically operated heater with a variable voltage transformer for controlled heating.

Product Overview

The Flash and Fire Point Tester of Bitumen is an open-cup type tester built to the Cleveland open-cup method. The body is made of brass or a non-rusting metal of equivalent heat conductivity. It has an electric heater with a rheostat type heater switch and a nickel-chromium heater element. The heater uses stepless variable control. The unit includes a thermometer holder with a flash point platform. The thermometer position is adjustable and can be raised out of the way to place and remove the test cup. The test flame is adjusted through a built-in needle valve.

Key Features

Key Features

  • Flash Point Testing: Cleveland open-cup method for bitumen
  • Heater Temperature: at least 450°C with stepless variable control
  • Heater Element: nickel-chromium
  • Heater Power: 1250 W (220 V)
  • Test Flame: adjusted through built-in needle valve
  • Thermometer Holder: adjustable position, raises out of the way
  • Body Material: brass or non-rusting metal of equivalent heat conductivity

Experiments

Flash point and fire point determination of bitumen by the Cleveland open-cup method.

Construction and Design

The Flash and Fire Point Tester of Bitumen has a brass or non-rusting metal body. It uses a nickel-chromium heater with stepless variable control. The thermometer holder includes a flash point platform. The test flame is adjusted with a built-in needle valve.

Software

No software is included.

Scope of Delivery

  • Clamps
  • Shell
  • Heater 1250 W (220 V)
  • Wattstat
  • Receptacle (110 V)
  • Switch
  • Flash cup
  • Test flame burner
  • Thermometer support
  • Heating plate support
  • Digital thermometer complying with ASTM 11C and IP 28C, mercury type, in Celsius
  • Gas cylinder (common type available in the market), connection, controlling valve, and pipe

Specifications

Flash and Fire Point Tester of Bitumen STL 205: Technical Specifications

Parameter Value
Test Method Cleveland open-cup method
Heater Power Supply 220 V AC
Heater Temperature At least 450°C
Heater Temperature Control Variable voltage transformer
Heater Material Nickel-chromium
Heater Control Type Stepless variable
Heater Power Rating 1250 W (220 V)
Test Cup Material Brass
Test Cup Inside Diameter 62.5 to 64 mm
Test Cup Outside Diameter 67.5 to 69 mm
Test Cup Inside Depth 32.5 to 34 mm
Test Cup Bottom Thickness 2.8 to 3.6 mm
Filling Mark Position 9 to 10 mm from top edge
Test Flame Nozzle Tip Diameter 1.6 to 5 mm
Test Flame Orifice Diameter Approximately 0.8 mm
Test Flame Swing Radius Minimum 150 mm
Orifice Center Height Not more than 2.5 mm above cup edge
Thermometer Range At least 400°C
Power Supply 220 V, 50 Hz

Technical Data

  • Heating Arrangement
    • Electrically operated heater: 220 V AC
    • Heater temperature: at least 450°C
    • Temperature control: variable voltage transformer
    • Heating plate and frame/support stand included
    • Thermometer fixed at center, depth adjustable
  • Test Cup
    • Material: brass
    • Inside diameter: 62.5 to 64 mm
    • Outside diameter: 67.5 to 69 mm
    • Inside depth: 32.5 to 34 mm
    • Bottom thickness: 2.8 to 3.6 mm
    • Filling mark: 9 to 10 mm from top edge
    • Flat shelf on outside included
  • Test Flame Applicator and Gas Supply
    • Nozzle tip diameter: 1.6 to 5 mm
    • Orifice diameter: approximately 0.8 mm
    • Swing radius: minimum 150 mm
    • Orifice center: not more than 2.5 mm above cup edge
    • Complete gas supply mechanism with controlling valve and pipe
  • Thermometer
    • Range: at least 400°C
    • Type: mercury, digital thermometer complying with ASTM 11C and IP 28C
    • Unit: Celsius
  • Power Supply
    • 220 V, 50 Hz

Buying Flash and Fire Point Tester of Bitumen: Distributor & Tender Guidance

Flash and Fire Point Tester of Bitumen is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Flash and Fire Point Tester of Bitumen as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

What test method does the tester use? It uses the Cleveland open-cup method.

What is the maximum heater temperature? The heater reaches at least 450°C.

How is the test flame adjusted? The test flame is adjusted through a built-in needle valve.

Can the thermometer be moved out of the way? Yes. The thermometer can be raised out of the way to place and remove the test cup.

What is the power supply? It runs on 220 V, 50 Hz.

Related Guides & Resources

In-depth guides from Scientico on Civil Engineering Training lab setup, experiments and procurement.

Flash and Fire Point Tester of Bitumen | STL 205

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Environmental-engineering-lab-equipmentEnvironmental Engineering Laboratory Equipmentdistance measuring wheelMeasuring Wheel | STL 201Dial Thermometer by Scientico IndiaDial Thermometer | STL 203Rock Testing EquipmentRock Testing Equipment | RockMetrikaConcrete and Cement Testing EquipmentConcrete & Cement Testing Equipment | BetonXpertSoftening Point Tester of Bitumen by Scientico IndiaSoftening Point Tester of Bitumen | STL 206Compression Testing Machine by Scientico IndiaCompression Testing Machine | STL 208soil-testingSoil Testing Equipment | StratoTestX
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Flash and Fire Point Tester of Bitumen | STL 205