🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Softening Point Tester of Bitumen

Model STL 206

Softening Point Tester of Bitumen is a ring-and-ball apparatus for determining bitumen softening point.
It covers the range from 30 to 150°C for petroleum products.
The magnetic stirrer and heater has separate regulators for stirrer speed and temperature rate.
It includes 4 brass rings, 4 steel balls, and a ring-holder for 2 rings.
Two thermometers cover the ranges from -2 to +80°C and 30 to 200°C.

The Softening Point Tester of Bitumen determines the softening point of bitumen by the ring-and-ball method. It covers the range from 30 to 150°C for petroleum products.

Product Overview

The Softening Point Tester of Bitumen is used for determining the softening point of bitumen in the range from 30 to 150°C of petroleum products. It uses a magnetic stirrer and heater with two regulators, one for stirrer speed and one for the rate of temperature change, set at 5 ± 0.5°C increase. The kit includes brass square-shouldered rings, steel balls with brass centering guides, a ring-holder, a pouring plate, a bath vessel, glass beakers with stands or clamps, and two thermometers.

Softening Point Tester of Bitumen STL 206: Technical Specifications

Parameter Value
Test Method Ring-and-ball apparatus
Softening Point Range 30 to 150°C
Heater Power Supply 220 V AC
Heating Rate 5 ± 0.5°C increase
Stirrer Control Separate regulator for speed
Temperature Rate Control Separate regulator for rate of change
Ring Material Brass
Ring Type Square-shouldered, 4 nos
Ring Top Inside Diameter 19.8 ± 0.3 mm
Ring Bottom Inside Diameter 15.9 ± 0.3 mm
Ring Total Depth 6.4 ± 0.4 mm
Ball Material Steel, 4 nos
Ball Diameter 9.5 mm
Ball Weight 3.5 ± 0.05 g
Ball Centering Guide Brass, 4 nos
Ring-Holder Material Brass, stainless steel, or aluminium
Ring-Holder Capacity 2 rings
Ring to Bottom Plate Gap 25.4 ± 0.8 mm
Bottom Plate to Beaker Distance 12.7 to 19 mm
Pouring Plate Flat brass, approx. 50 × 75 mm
Bath Vessel Depth Not less than 120 mm
Bath Heating Rate 5°C/min
Bath Variation Limit ± 0.5°C per 1-min period after first 3 minutes
Beaker Quantity 3 nos
Beaker Diameter Not less than 85 mm
Beaker Depth Not less than 120 mm
Beaker Fill Depth 100 to 108 mm
Low Range Thermometer -2 to +80°C, sensitivity 0.5°C, 1 no
High Range Thermometer 30 to 200°C, sensitivity 1°C, 1 no

Technical Data

  • Heating and Stirring
    • Magnetic stirrer and heater: 220 V AC
    • Regulator 1: stirrer speed
    • Regulator 2: rate of temperature change, 5 ± 0.5°C increase
  • Rings
    • Material: brass
    • Quantity: 4 nos, square-shouldered
    • Top inside diameter: 19.8 ± 0.3 mm
    • Bottom inside diameter: 15.9 ± 0.3 mm
    • Total depth: 6.4 ± 0.4 mm
  • Balls and Guides
    • Balls: steel, 4 nos
    • Ball diameter: 9.5 mm
    • Ball weight: 3.5 ± 0.05 g
    • Centering guides: brass, 4 nos
  • Ring-Holder
    • Material: brass, stainless steel, or aluminium
    • Capacity: 2 rings
    • Gap between ring bottom and bottom plate: 25.4 ± 0.8 mm
    • Distance from bottom plate to beaker: 12.7 to 19 mm
    • Thermometer bulb level with ring bottom and within 12.7 mm of rings
    • Immersion depth adjustable with screw/nut
  • Pouring Plate and Bath
    • Pouring plate: flat, smooth brass, approx. 50 × 75 mm
    • Bath vessel: glass, heatable, not less than 120 mm deep
    • Bath heating rate: 5°C/min
    • Permissible variation: ± 0.5°C per 1-min period after first 3 minutes
  • Beakers
    • Quantity: 3 nos
    • Diameter: not less than 85 mm
    • Depth: not less than 120 mm
    • Fill depth: 100 to 108 mm
    • Stand/clamp included for setting thermometer
  • Thermometers
    • Low softening point: -2 to +80°C, sensitivity 0.5°C, 1 no
    • High softening point: 30 to 200°C, sensitivity 1°C, 1 no

Key Features

  • Softening Point Range: 30 to 150°C
  • Test Method: ring-and-ball apparatus
  • Heating Rate Control: 5 ± 0.5°C increase with separate regulator
  • Stirrer Speed: separate magnetic stirrer regulator
  • Ring Set: 4 brass square-shouldered rings
  • Ball Set: 4 steel balls, 9.5 mm diameter
  • Thermometers: low range (-2 to +80°C) and high range (30 to 200°C)

Experiments

Softening point determination of bitumen by the ring-and-ball method, from 30 to 150°C.

Construction and Design

The Softening Point Tester of Bitumen uses brass rings and a brass or stainless steel or aluminium ring-holder. The magnetic stirrer and heater has two regulators. The ring-holder allows adjustment of thermometer position and immersion depth.

Scope of Delivery

  • Magnetic stirrer and heater with two regulators, 220 V AC
  • Brass square-shouldered rings, 4 nos
  • Steel balls, 4 nos, 9.5 mm diameter, 3.5 ± 0.05 g
  • Brass ball centering guides, 4 nos
  • Ring-holder with provision for 2 rings
  • Flat brass pouring plate, approx. 50 × 75 mm
  • Glass bath vessel, not less than 120 mm deep
  • Glass beakers, 3 nos, with stand/clamp
  • Low softening point thermometer, -2 to +80°C, sensitivity 0.5°C, 1 no
  • High softening point thermometer, 30 to 200°C, sensitivity 1°C, 1 no

What is the softening point range of this tester?
It covers 30 to 150°C for petroleum products.

What test method does it use?
It uses the ring-and-ball apparatus.

How many rings and balls are included?
It includes 4 brass rings and 4 steel balls.

What thermometers are supplied?
One low softening point thermometer (-2 to +80°C, 0.5°C sensitivity) and one high softening point thermometer (30 to 200°C, 1°C sensitivity).

What is the heating rate?
The bath heating rate is 5°C per minute.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Softening Point Tester of Bitumen | STL 206 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Civil Engineering Training EquipmentModel STL 206
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
STL 206

Overview

The Softening Point Tester of Bitumen determines the softening point of bitumen by the ring-and-ball method. It covers the range from 30 to 150°C for petroleum products.

Product Overview

The Softening Point Tester of Bitumen is used for determining the softening point of bitumen in the range from 30 to 150°C of petroleum products. It uses a magnetic stirrer and heater with two regulators, one for stirrer speed and one for the rate of temperature change, set at 5 ± 0.5°C increase. The kit includes brass square-shouldered rings, steel balls with brass centering guides, a ring-holder, a pouring plate, a bath vessel, glass beakers with stands or clamps, and two thermometers.

Key Features

Key Features

  • Softening Point Range: 30 to 150°C
  • Test Method: ring-and-ball apparatus
  • Heating Rate Control: 5 ± 0.5°C increase with separate regulator
  • Stirrer Speed: separate magnetic stirrer regulator
  • Ring Set: 4 brass square-shouldered rings
  • Ball Set: 4 steel balls, 9.5 mm diameter
  • Thermometers: low range (-2 to +80°C) and high range (30 to 200°C)

Experiments

Softening point determination of bitumen by the ring-and-ball method, from 30 to 150°C.

Construction and Design

The Softening Point Tester of Bitumen uses brass rings and a brass or stainless steel or aluminium ring-holder. The magnetic stirrer and heater has two regulators. The ring-holder allows adjustment of thermometer position and immersion depth.

Scope of Delivery

  • Magnetic stirrer and heater with two regulators, 220 V AC
  • Brass square-shouldered rings, 4 nos
  • Steel balls, 4 nos, 9.5 mm diameter, 3.5 ± 0.05 g
  • Brass ball centering guides, 4 nos
  • Ring-holder with provision for 2 rings
  • Flat brass pouring plate, approx. 50 × 75 mm
  • Glass bath vessel, not less than 120 mm deep
  • Glass beakers, 3 nos, with stand/clamp
  • Low softening point thermometer, -2 to +80°C, sensitivity 0.5°C, 1 no
  • High softening point thermometer, 30 to 200°C, sensitivity 1°C, 1 no

Specifications

Softening Point Tester of Bitumen STL 206: Technical Specifications

Parameter Value
Test Method Ring-and-ball apparatus
Softening Point Range 30 to 150°C
Heater Power Supply 220 V AC
Heating Rate 5 ± 0.5°C increase
Stirrer Control Separate regulator for speed
Temperature Rate Control Separate regulator for rate of change
Ring Material Brass
Ring Type Square-shouldered, 4 nos
Ring Top Inside Diameter 19.8 ± 0.3 mm
Ring Bottom Inside Diameter 15.9 ± 0.3 mm
Ring Total Depth 6.4 ± 0.4 mm
Ball Material Steel, 4 nos
Ball Diameter 9.5 mm
Ball Weight 3.5 ± 0.05 g
Ball Centering Guide Brass, 4 nos
Ring-Holder Material Brass, stainless steel, or aluminium
Ring-Holder Capacity 2 rings
Ring to Bottom Plate Gap 25.4 ± 0.8 mm
Bottom Plate to Beaker Distance 12.7 to 19 mm
Pouring Plate Flat brass, approx. 50 × 75 mm
Bath Vessel Depth Not less than 120 mm
Bath Heating Rate 5°C/min
Bath Variation Limit ± 0.5°C per 1-min period after first 3 minutes
Beaker Quantity 3 nos
Beaker Diameter Not less than 85 mm
Beaker Depth Not less than 120 mm
Beaker Fill Depth 100 to 108 mm
Low Range Thermometer -2 to +80°C, sensitivity 0.5°C, 1 no
High Range Thermometer 30 to 200°C, sensitivity 1°C, 1 no

Technical Data

  • Heating and Stirring
    • Magnetic stirrer and heater: 220 V AC
    • Regulator 1: stirrer speed
    • Regulator 2: rate of temperature change, 5 ± 0.5°C increase
  • Rings
    • Material: brass
    • Quantity: 4 nos, square-shouldered
    • Top inside diameter: 19.8 ± 0.3 mm
    • Bottom inside diameter: 15.9 ± 0.3 mm
    • Total depth: 6.4 ± 0.4 mm
  • Balls and Guides
    • Balls: steel, 4 nos
    • Ball diameter: 9.5 mm
    • Ball weight: 3.5 ± 0.05 g
    • Centering guides: brass, 4 nos
  • Ring-Holder
    • Material: brass, stainless steel, or aluminium
    • Capacity: 2 rings
    • Gap between ring bottom and bottom plate: 25.4 ± 0.8 mm
    • Distance from bottom plate to beaker: 12.7 to 19 mm
    • Thermometer bulb level with ring bottom and within 12.7 mm of rings
    • Immersion depth adjustable with screw/nut
  • Pouring Plate and Bath
    • Pouring plate: flat, smooth brass, approx. 50 × 75 mm
    • Bath vessel: glass, heatable, not less than 120 mm deep
    • Bath heating rate: 5°C/min
    • Permissible variation: ± 0.5°C per 1-min period after first 3 minutes
  • Beakers
    • Quantity: 3 nos
    • Diameter: not less than 85 mm
    • Depth: not less than 120 mm
    • Fill depth: 100 to 108 mm
    • Stand/clamp included for setting thermometer
  • Thermometers
    • Low softening point: -2 to +80°C, sensitivity 0.5°C, 1 no
    • High softening point: 30 to 200°C, sensitivity 1°C, 1 no

Buying Softening Point Tester of Bitumen: Distributor & Tender Guidance

Softening Point Tester of Bitumen is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Softening Point Tester of Bitumen as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

What is the softening point range of this tester? It covers 30 to 150°C for petroleum products.

What test method does it use? It uses the ring-and-ball apparatus.

How many rings and balls are included? It includes 4 brass rings and 4 steel balls.

What thermometers are supplied? One low softening point thermometer (-2 to +80°C, 0.5°C sensitivity) and one high softening point thermometer (30 to 200°C, 1°C sensitivity).

What is the heating rate? The bath heating rate is 5°C per minute.

Related Guides & Resources

In-depth guides from Scientico on Civil Engineering Training lab setup, experiments and procurement.

Softening Point Tester of Bitumen | STL 206

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Rock Testing EquipmentRock Testing Equipment | RockMetrikasoil-testingSoil Testing Equipment | StratoTestXdistance measuring wheelMeasuring Wheel | STL 201Steel-Testing-Lab-EquipmentSteel Testing Laboratory Equipment | MettaloEdgeFlash and Fire Point Tester of Bitumen by Scientico IndiaFlash and Fire Point Tester of Bitumen | STL 205Survey-Instruments-and-AccessoriesSurvey Instruments and AccessoriesEnvironmental-engineering-lab-equipmentEnvironmental Engineering Laboratory EquipmentVicat Apparatus by Scientico IndiaVicat Apparatus | STL 207
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Softening Point Tester of Bitumen | STL 206