IGBT Inverter Training Module
Model SC-IGB 1083
The IGBT Inverter Training Module – SC-IGB 1083 is a six-IGBT inverter rated Vce 1,200 V and Ic 15 A, with a maximum output of 1 kVA. A DSP-based control and measuring unit provides 6-pulse AC inverter control, with selectable 1–20 kHz PWM using sinusoidal or space-vector methods. The modulation index is adjustable and displayed. Integrated current and voltage measurement is provided, along with overvoltage and overload cut-off and an integrated brake chopper. All IGBT terminals are 4 mm safety sockets, and DC link discharge resistors are fitted. A USB interface links the unit to Windows 10/11 control and waveform software under a room licence. It complies with IEC/EN 61010-1 and CE standards.
The IGBT Inverter Training Module – SC-IGB 1083 is a six-IGBT inverter trainer with DSP-based control and measuring unit. It is designed for power electronics and drives training.
Product Overview
The IGBT Inverter Training Module – SC-IGB 1083 uses six IGBTs rated at Vce 1,200 V and Ic 15 A. It is controlled by a DSP-based control and measuring unit that provides 6-pulse IGBT AC inverter control. PWM switching frequency is selectable from 1 to 20 kHz. The modulation index is adjustable and displayed. Both sinusoidal PWM and space-vector PWM are supported, with an analogue input. Current and voltage are measured within the unit. Overvoltage and overload monitoring cut off the output when limits are exceeded. An integrated brake chopper is included. Maximum output is 1 kVA. A USB interface connects to control, monitoring and waveform software for Windows 10/11, supplied under a room licence with no recurring fee. All IGBT terminals are 4 mm safety sockets. DC link discharge resistors and an indicator are fitted. The unit complies with IEC/EN 61010-1 and CE standards.
IGBT Inverter Training Module – SC-IGB 1083: Technical Specifications
| Category | Specification |
|---|---|
| Devices | 6 IGBTs |
| Voltage Rating | Vce 1,200 V |
| Current Rating | Ic 15 A |
| Control | 6-pulse IGBT AC inverter control; DSP-based control and measuring unit |
| PWM Frequency | 1–20 kHz, selectable |
| Modulation | Sinusoidal PWM and space-vector PWM; modulation index adjustable and displayed |
| Analogue Input | Yes |
| Measurement | Integrated current and voltage measurement |
| Protection | Overvoltage and overload monitoring with cut-off |
| Brake Chopper | Integrated |
| Maximum Output | 1 kVA |
| Interface | USB |
| Software | Control, monitoring and waveform software; Windows 10/11; room licence; no recurring fee |
| Terminals | 4 mm safety sockets on every IGBT terminal |
| DC Link | Discharge resistors and indicator |
| Compliance | IEC/EN 61010-1; documentation reviewed per model |
Key Features
- Six-IGBT Inverter: 1,200 V, 15 A devices for AC inverter training
- DSP Control: digital signal processor for control and measurement
- Selectable PWM: 1–20 kHz switching frequency
- Two PWM Methods: sinusoidal PWM and space-vector PWM
- Adjustable Modulation: modulation index set and displayed
- Integrated Measurement: current and voltage monitoring
- Protection Monitoring: overvoltage and overload cut-off
- Brake Chopper: integrated for regenerative energy handling
- Safety Sockets: 4 mm sockets on every IGBT terminal
- DC Link Discharge: resistors and indicator fitted
- Software Included: Windows 10/11 control and waveform software, room licence, no recurring fee
Experiments
- Six-pulse IGBT inverter operation and output waveform generation
- Sinusoidal PWM generation and modulation index adjustment
- Space-vector PWM operation and comparison with sinusoidal PWM
- Effect of switching frequency (1–20 kHz) on output waveform and losses
- Current and voltage measurement at inverter output
- Overvoltage and overload protection response
- Brake chopper operation and DC link voltage control
- Analogue input control of inverter output
- Waveform capture and analysis using the supplied software
- DC link discharge and safe handling procedures
Construction and Design
The IGBT Inverter Training Module – SC-IGB 1083 contains six IGBTs connected in a three-phase bridge. A DSP-based control and measuring unit generates the PWM signals and monitors current and voltage. Each IGBT terminal is a 4 mm safety socket. DC link discharge resistors and an indicator are fitted for safety. An integrated brake chopper is included. A USB interface links the module to the supplied software.
Software
Control, monitoring and waveform software for Windows 10/11 is included under a room licence, with no recurring fee.
Scope of Delivery
- IGBT inverter module
- USB cable and software
- English manual with circuit diagrams and graded experiments
Q: What are the IGBT ratings?
A: The module uses six IGBTs rated at Vce 1,200 V and Ic 15 A.
Q: What PWM methods are available?
A: The module supports sinusoidal PWM and space-vector PWM, with switching frequency selectable from 1 to 20 kHz.
Q: How is the module controlled?
A: A DSP-based control and measuring unit provides 6-pulse IGBT AC inverter control. The modulation index is adjustable and displayed, and an analogue input is available.
Q: What protection is included?
A: Overvoltage and overload monitoring cut off the output when limits are exceeded. An integrated brake chopper is also fitted.
Q: What is the maximum output and how is the module connected to a PC?
A: The maximum output is 1 kVA. The module connects by USB to control, monitoring and waveform software for Windows 10/11, supplied under a room licence with no recurring fee.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








