🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Six-Axis Articulated Robot (Educational, Collaborative)

Model SC-RA6 0500

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated 6-axis tabletop robot with open-hardware joints that learners can dismantle and rebuild. It has a 1.5 kg payload, 600 mm reach, and ±0.05 mm repeatability, with DC servo drives on each joint. Tooling includes an electric parallel gripper, suction cup, and pen holder. The robot is ROS compatible and programmable in Python and C++. A 2 MP camera with object-detection software and 3D simulation are supplied under a room licence. Torque sensing and power limiting follow ISO 10218-1 and ISO/TS 15066, with an E-stop unit, IP54 rating, and CE marking. On-site assembly, commissioning, calibration, and 16 hours of train-the-trainer are included.

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated 6-axis tabletop robot of open-hardware design. Learners can dismantle and rebuild its joints, and it is programmable in Python and C++.

Product Overview

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated 6-axis tabletop robot with open-hardware design, so learners can dismantle and rebuild its joints. It has a payload of 1.5 kg at full extension and a reach of 600 mm, with repeatability of ±0.05 mm. Each joint has a precision DC servo drive with an independent joint controller. Tooling includes an electric parallel gripper, a suction cup, and a pen holder. The embedded controller in the base supports ROS, Wi-Fi, Ethernet, and a Python and C++ API. Communication options include TCP/IP, Modbus TCP and RTU, and a 50-pin D-sub PLC interface compatible with the S7-1200. A 2 MP USB camera with bracket and object-detection software is supplied under a room licence, along with 3D simulation software for offline programming. The robot uses torque sensing and power limiting, with test evidence to ISO 10218-1 and ISO/TS 15066. It includes an E-stop unit, is rated IP54, and is documentation reviewed per model. Service includes on-site assembly, commissioning, calibration, and 16 hours of train-the-trainer support.

Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500: Technical Specifications

Category Specification
Robot Type Vertically articulated, 6-axis, tabletop
Design Open hardware; joints can be dismantled and rebuilt
Payload 1.5 kg at full extension
Reach 600 mm
Repeatability ±0.05 mm
Drives Precision DC servo per joint with independent joint controller
Tooling Electric parallel gripper; suction cup; pen holder
Controller Embedded in base
Programming ROS; Python and C++ API
Connectivity Wi-Fi; Ethernet
Communication TCP/IP; Modbus TCP and RTU; 50-pin D-sub PLC interface; S7-1200 compatible
Vision 2 MP USB camera with bracket; object-detection software; room licence
Torque Sensing Power limiting and torque sensing to ISO 10218-1 and ISO/TS 15066, with test evidence
Emergency Stop E-stop unit
Ingress Protection IP54
Simulation 3D simulation for offline programming; room licence
Compliance documentation reviewed per model
Service On-site assembly, commissioning and calibration; 16 h train-the-trainer

Key Features

  • Open-Hardware Design: learners can dismantle and rebuild the joints
  • Six-Axis Motion: vertically articulated tabletop arm
  • Collaborative Safety: torque sensing and power limiting with test evidence
  • Precision Drives: DC servo per joint with independent joint controllers
  • Multiple Tools: electric parallel gripper, suction cup, and pen holder
  • ROS Compatible: Python and C++ programming support
  • Industrial Connectivity: TCP/IP, Modbus TCP and RTU, and S7-1200 compatible PLC interface
  • Vision System: 2 MP USB camera with object-detection software
  • Offline Programming: 3D simulation software included
  • On-Site Support: assembly, commissioning, calibration, and train-the-trainer

Experiments

  • Forward and inverse kinematics of a six-axis arm
  • Joint dismantling, reassembly and calibration
  • Pick-and-place using the electric parallel gripper
  • Suction cup handling of objects
  • Drawing with the pen holder
  • Python and C++ programming of robot motion
  • ROS-based robot control and messaging
  • Object detection using the 2 MP camera and vision software
  • Offline programming and motion verification in 3D simulation
  • Modbus and TCP/IP communication with the robot controller
  • PLC control of the robot through the S7-1200 compatible interface
  • Torque sensing and power limiting response during contact

Construction and Design

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated tabletop arm with six joints. Each joint is driven by a precision DC servo with its own joint controller. The embedded controller sits in the base. The joints are designed to be dismantled and rebuilt for learning. A 1.5 kg payload and 600 mm reach define its working envelope. Tooling is interchangeable between the electric parallel gripper, suction cup, and pen holder. A 2 MP camera mounts on a bracket. The robot is rated IP54.

Software

ROS compatibility, Python and C++ API, 3D simulation software for offline programming, and object-detection software are included. The simulation and vision software are supplied under a room licence.

Scope of Delivery

  • 6-axis robot with base frame
  • Gripper and tool set
  • Camera with vision software
  • Simulation software
  • Cables and calibration tools
  • English teacher and student manuals

Q: What are the payload and reach?
A: The robot has a payload of 1.5 kg at full extension and a reach of 600 mm, with repeatability of ±0.05 mm.

Q: Can learners take the robot apart?
A: Yes. The robot is of open-hardware design, so learners can dismantle and rebuild its joints.

Q: Which programming languages are supported?
A: The robot supports Python and C++ through its API, and is ROS compatible.

Q: What safety features are included?
A: The robot uses torque sensing and power limiting, with test evidence to ISO 10218-1 and ISO/TS 15066. It has an E-stop unit and is rated IP54.

Q: Which PLC and network interfaces are available?
A: The robot supports TCP/IP, Modbus TCP and RTU, and a 50-pin D-sub PLC interface compatible with the S7-1200. Wi-Fi and Ethernet are also available.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Six-Axis Articulated Robot (Educational, Collaborative) | SC-RA6 0500 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

TVET EquipmentsModel SC-RA6 0500
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SC-RA6 0500

Overview

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated 6-axis tabletop robot of open-hardware design. Learners can dismantle and rebuild its joints, and it is programmable in Python and C++.

Product Overview

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated 6-axis tabletop robot with open-hardware design, so learners can dismantle and rebuild its joints. It has a payload of 1.5 kg at full extension and a reach of 600 mm, with repeatability of ±0.05 mm. Each joint has a precision DC servo drive with an independent joint controller. Tooling includes an electric parallel gripper, a suction cup, and a pen holder. The embedded controller in the base supports ROS, Wi-Fi, Ethernet, and a Python and C++ API. Communication options include TCP/IP, Modbus TCP and RTU, and a 50-pin D-sub PLC interface compatible with the S7-1200. A 2 MP USB camera with bracket and object-detection software is supplied under a room licence, along with 3D simulation software for offline programming. The robot uses torque sensing and power limiting, with test evidence to ISO 10218-1 and ISO/TS 15066. It includes an E-stop unit, is rated IP54, and is documentation reviewed per model. Service includes on-site assembly, commissioning, calibration, and 16 hours of train-the-trainer support.

Key Features

Key Features

  • Open-Hardware Design: learners can dismantle and rebuild the joints
  • Six-Axis Motion: vertically articulated tabletop arm
  • Collaborative Safety: torque sensing and power limiting with test evidence
  • Precision Drives: DC servo per joint with independent joint controllers
  • Multiple Tools: electric parallel gripper, suction cup, and pen holder
  • ROS Compatible: Python and C++ programming support
  • Industrial Connectivity: TCP/IP, Modbus TCP and RTU, and S7-1200 compatible PLC interface
  • Vision System: 2 MP USB camera with object-detection software
  • Offline Programming: 3D simulation software included
  • On-Site Support: assembly, commissioning, calibration, and train-the-trainer

Experiments

  • Forward and inverse kinematics of a six-axis arm
  • Joint dismantling, reassembly and calibration
  • Pick-and-place using the electric parallel gripper
  • Suction cup handling of objects
  • Drawing with the pen holder
  • Python and C++ programming of robot motion
  • ROS-based robot control and messaging
  • Object detection using the 2 MP camera and vision software
  • Offline programming and motion verification in 3D simulation
  • Modbus and TCP/IP communication with the robot controller
  • PLC control of the robot through the S7-1200 compatible interface
  • Torque sensing and power limiting response during contact

Construction and Design

The Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500 is a vertically articulated tabletop arm with six joints. Each joint is driven by a precision DC servo with its own joint controller. The embedded controller sits in the base. The joints are designed to be dismantled and rebuilt for learning. A 1.5 kg payload and 600 mm reach define its working envelope. Tooling is interchangeable between the electric parallel gripper, suction cup, and pen holder. A 2 MP camera mounts on a bracket. The robot is rated IP54.

Software

ROS compatibility, Python and C++ API, 3D simulation software for offline programming, and object-detection software are included. The simulation and vision software are supplied under a room licence.

Scope of Delivery

  • 6-axis robot with base frame
  • Gripper and tool set
  • Camera with vision software
  • Simulation software
  • Cables and calibration tools
  • English teacher and student manuals

Specifications

Six-Axis Articulated Robot (Educational, Collaborative) – SC-RA6 0500: Technical Specifications

Category Specification
Robot Type Vertically articulated, 6-axis, tabletop
Design Open hardware; joints can be dismantled and rebuilt
Payload 1.5 kg at full extension
Reach 600 mm
Repeatability ±0.05 mm
Drives Precision DC servo per joint with independent joint controller
Tooling Electric parallel gripper; suction cup; pen holder
Controller Embedded in base
Programming ROS; Python and C++ API
Connectivity Wi-Fi; Ethernet
Communication TCP/IP; Modbus TCP and RTU; 50-pin D-sub PLC interface; S7-1200 compatible
Vision 2 MP USB camera with bracket; object-detection software; room licence
Torque Sensing Power limiting and torque sensing to ISO 10218-1 and ISO/TS 15066, with test evidence
Emergency Stop E-stop unit
Ingress Protection IP54
Simulation 3D simulation for offline programming; room licence
Compliance documentation reviewed per model
Service On-site assembly, commissioning and calibration; 16 h train-the-trainer

Buying Six-Axis Articulated Robot (Educational, Collaborative): Distributor & Tender Guidance

Six-Axis Articulated Robot (Educational, Collaborative) is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Six-Axis Articulated Robot (Educational, Collaborative) as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What are the payload and reach? A: The robot has a payload of 1.5 kg at full extension and a reach of 600 mm, with repeatability of ±0.05 mm.

Q: Can learners take the robot apart? A: Yes. The robot is of open-hardware design, so learners can dismantle and rebuild its joints.

Q: Which programming languages are supported? A: The robot supports Python and C++ through its API, and is ROS compatible.

Q: What safety features are included? A: The robot uses torque sensing and power limiting, with test evidence to ISO 10218-1 and ISO/TS 15066. It has an E-stop unit and is rated IP54.

Q: Which PLC and network interfaces are available? A: The robot supports TCP/IP, Modbus TCP and RTU, and a 50-pin D-sub PLC interface compatible with the S7-1200. Wi-Fi and Ethernet are also available.

Related Guides & Resources

In-depth guides from Scientico on TVET Equipments lab setup, experiments and procurement.

Six-Axis Articulated Robot (Educational, Collaborative) | SC-RA6 0500

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Single-Phase Transformer Training Kit by Scientico IndiaSingle-Phase Transformer Training Kit | SC-SPT 1000Three-Phase Slip-Ring Machine SC-SRM 0800Slip-Ring Induction Machine Trainer | SC-SRM 0800Split-Phase Motor TrainerSingle-Phase Split-Phase Induction Motor Trainer | SC-SPM 0250Socket Set by Scientico IndiaSocket Set | SCTV 05Capacitor-Start Motor TrainerSingle-Phase Capacitor-Start Induction Motor Trainer | SC-CSM 0750Three-Phase Induction Motor SC-SCM 1100Squirrel-Cage Induction Motor Trainer | SC-SCM 1100Sheet Rolling Machine 50 inch by Scientico IndiaSheet Rolling Machine 50 inch | SCI-SR-502Sectioned Induction Motor SC-SCX 0750Squirrel-Cage Induction Motor, Sectioned (Cut-Away) | SC-SCX 0750
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Six-Axis Articulated Robot (Educational, Collaborative) | SC-RA6 0500