Squirrel-Cage Induction Motor, Sectioned (Cut-Away)
Model SC-SCX 0750
The Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750 is a visual demonstration model rated at 0.75 kW, 230/400 V AC, 50–60 Hz, 4 poles, 1,400 rpm. It is sectioned through approximately 90 degrees to show the laminated stator core, windings, cast-aluminium rotor cage, air gap, shaft, fan, and bearings. All components are labelled in English and cut surfaces are painted in contrasting colours. The motor is enclosed in a transparent 6 mm polycarbonate case with a lockable service panel and interlock switch. Star and delta terminals (4 mm safety sockets) are provided for connection demonstration. It complies with CE and IEC/EN 60034 standards. It is ideal for teaching induction motor construction, rotor cage design, cooling, and stator-rotor interaction.
The Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750 is a visual demonstration model sectioned through approximately 90 degrees to show laminated stator core and windings, cage rotor, air gap, frame, bearings and cooling. It is a demonstration model only; not for load or performance testing.
Product Overview
The Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750 is rated at 0.75 kW, 230/400 V AC, 50–60 Hz, 4 poles, 1,400 rpm, class F insulation, IC411 cooling, and IP20 enclosure. The motor is sectioned to reveal stator slots, cast-aluminium rotor bars, laminations, shaft, fan, and bearings. Cut surfaces are machined, deburred, and painted in contrasting colours. All components are labelled in English. A transparent polycarbonate enclosure, 6 mm thick and UV stabilised, encloses the sectioned motor with gasket sealing. A lockable service panel with an interlock safety switch prevents unauthorised access. Four millimetre safety sockets for U–V–W and earth terminals are provided for star and delta wiring demonstration only. The unit complies with CE standards and IEC/EN 60034 nameplate requirements.
Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750: Technical Specifications
| Category | Specification |
|---|---|
| Power Rating | 0.75 kW |
| Voltage | 230/400 V AC |
| Frequency | 50–60 Hz |
| Poles | 4 poles |
| Speed | 1,400 rpm |
| Insulation Class | F |
| Cooling Method | IC411 |
| Enclosure Class | IP20 |
| Visible Components | Stator slots, cast-aluminium rotor bars, laminations, shaft, fan, bearings |
| Enclosure | Transparent polycarbonate, 6 mm, UV stabilised, gasket sealed |
| Service Panel | Lockable with interlock safety switch |
| Terminals | 4 mm safety sockets U–V–W and earth for star/delta wiring demonstration |
| Surface Treatment | Cut surfaces machined, deburred, painted in contrasting colours |
| Labelling | All components labelled in English |
| Compliance | documentation reviewed per model; metal nameplate to IEC/EN 60034 |
| Operational Status | Visual demonstration model only; not for load or performance testing |
Key Features
- 90-Degree Section: complete internal visibility of induction motor construction
- Visible Rotor: cast-aluminium rotor bars and cage clearly displayed
- Visible Stator: laminated core, slots, and windings exposed
- Air Gap Visible: spacing between rotor and stator shown
- Cooling System: fan and IC411 cooling arrangement visible
- Bearing Inspection: shaft support bearings clearly visible
- Transparent Enclosure: 6 mm polycarbonate, UV stabilised, 360-degree view
- Contrasting Paint: cut surfaces painted for clarity and identification
- Component Labels: all parts labelled in English
- Safety Interlock: lockable service panel with interlock switch
- Compliance: CE and IEC/EN 60034
Experiments
- Visual identification of stator laminations and winding arrangement
- Observation of rotor cage construction and bar positioning
- Understanding air gap effect on motor performance
- Rotor bar current path and cage design principle
- Stator slot design and winding distribution
- Fan and cooling path demonstration
- Bearing support and shaft alignment
- Comparison of lamination thickness and eddy current loss
- Star and delta winding connection demonstration using terminals
- Analysis of magnetic field direction and rotor torque development
Construction and Design
The Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750 is sectioned through approximately 90 degrees to expose all major components. The laminated stator core with winding slots is fully visible. The cast-aluminium rotor cage is clearly displayed with rotor bars and end rings exposed. The shaft, fan, and bearing supports are visible. Cut surfaces are machined, deburred, and painted in contrasting colours. All components are labelled in English. A transparent polycarbonate enclosure, 6 mm thick and UV stabilised, surrounds the sectioned motor with gasket sealing. A lockable service panel with an interlock safety switch prevents access to internal parts. Four millimetre safety sockets for U–V–W and earth terminals allow star and delta connection demonstrations.
Scope of Delivery
- Sectioned motor in enclosure
- English manual with sectional drawing and component identification
Q: Is this motor for electrical operation or load testing?
A: No. The Squirrel-Cage Induction Motor, Sectioned (Cut-Away) – SC-SCX 0750 is a visual demonstration model only. It is not for electrical operation, load testing, or performance measurement.
Q: Can I see the rotor cage?
A: Yes. The motor is sectioned through approximately 90 degrees, fully exposing the cast-aluminium rotor bars and cage structure. All rotor components are clearly visible.
Q: Are the stator windings visible?
A: Yes. The laminated stator core, slots, and winding arrangement are fully exposed and labelled in English for easy identification.
Q: Can I demonstrate star and delta connections?
A: Yes. The 4 mm safety sockets for U–V–W and earth terminals allow you to demonstrate star and delta winding connections without electrical operation.
Q: Is the enclosure safe?
A: Yes. The transparent polycarbonate enclosure is gasket sealed and has a lockable service panel with an interlock safety switch, complying with CE safety standards.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








