Single-Phase Split-Phase Induction Motor Trainer
Model SC-SPM 0250
The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 is a resistance-start split-phase induction motor rated at 0.37 kW, 230 V AC, 50–60 Hz, 2,820 rpm at 50 Hz. The run winding, start winding, and centrifugal switch are brought out separately to an overhead terminal box with 4 mm safety sockets for educational experiments. The motor mounts on an aluminium base with anti-vibration glides and thermal overload protection. A coupling hub connects to flexible rubber coupling Item 11075. Electronic motor data is provided as a QR code and PDF data sheet. It complies with IEC/EN 60034 and CE standards and is ideal for single-phase motor operation, starting principle, and centrifugal switch studies.
The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 is a resistance-start split-phase induction motor with no starting or running capacitor. Main and auxiliary windings and the centrifugal switch are brought out separately for experiments.
Product Overview
The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 is rated at 0.37 kW, 230 V AC, 50–60 Hz, with a current of 2.8 A. The motor has 2 poles and operates at 2,820 rpm at 50 Hz. It mounts on an aluminium base with anti-vibration glides and includes thermal overload protection. An overhead terminal box with 4 mm safety sockets brings out the run winding, start winding, centrifugal switch, and earth separately. The shaft end has a coupling hub compatible with flexible rubber coupling Item 11075. Motor data is provided as an electronic nameplate (EDD) readable as a QR code and PDF data sheet. Insulation is Class F and the enclosure is IP20. The motor complies with IEC/EN 60034 and CE standards.
Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250: Technical Specifications
| Category | Specification |
|---|---|
| Power Rating | 0.37 kW |
| Voltage | 230 V AC, 50–60 Hz |
| Current | 2.8 A |
| Poles | 2 poles |
| Speed | 2,820 rpm at 50 Hz |
| Construction | Two shaft ends; aluminium base with anti-vibration glides |
| Winding Access | Run winding, start winding, centrifugal switch brought out separately |
| Terminals | Overhead terminal box with 4 mm safety sockets; earth included |
| Shaft End | Coupling hub for flexible rubber coupling Item 11075 |
| Protection | Thermal overload protector |
| Motor Data | Electronic nameplate (EDD) as QR code and PDF data sheet |
| Insulation | Class F |
| Enclosure | IP20 |
| Standards | IEC/EN 60034; documentation reviewed per model |
| Nameplate | Metal, to IEC/EN 60034 |
Key Features
- Split-Phase Design: resistance-start induction motor without capacitors
- Rated Power: 0.37 kW at 230 V AC, 50–60 Hz, 2.8 A
- Accessible Windings: run and start windings and centrifugal switch brought out separately
- Centrifugal Switch: visible terminal for switching experiments
- Plug-In Connections: 4 mm safety sockets in overhead terminal box
- Thermal Overload Protection: built-in protection included
- Anti-Vibration Base: aluminium base with glides for stability
- Standard Shaft: coupling hub compatible with Item 11075 flexible rubber coupling
- Electronic Nameplate: QR code and PDF data sheet readable on any device
- Compliance: IEC/EN 60034 and CE standards
Experiments
- Split-phase motor starting principle and phase shift between windings
- Centrifugal switch operation and timing during acceleration
- Run winding and start winding current and voltage during start-up
- Effect of auxiliary winding resistance on starting torque
- No-load and full-load operation characteristics
- Speed-torque curve measurement
- Thermal overload protection operation and reset
- Single-phase motor efficiency measurement
- Capacitor addition experiments (external capacitor, if applied)
- Bearing wear inspection and lubrication effects
Construction and Design
The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 has a rotor with a resistance-start split-phase design. The run winding, start winding, and centrifugal switch are brought out to an overhead terminal box with 4 mm safety sockets. The motor mounts on an aluminium base with anti-vibration glides. A thermal overload protector is included. The shaft has two ends and a coupling hub compatible with flexible rubber coupling Item 11075.
Scope of Delivery
- Motor on base plate with coupling hub
- English manuals, wiring diagrams and maintenance schedule
Q: What is the power rating of this motor?
A: The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 is rated at 0.37 kW, 230 V AC, 50–60 Hz, 2,820 rpm at 50 Hz, with a current of 2.8 A.
Q: Does this motor use a starting capacitor?
A: No. This is a resistance-start split-phase motor with no starting or running capacitor. The starting torque is developed by phase displacement between the run and start windings created by resistance.
Q: Can I observe the centrifugal switch operation?
A: Yes. The centrifugal switch is brought out separately to the overhead terminal box, allowing you to observe and measure its switching action during start-up and run phases.
Q: Are the run and start windings accessible?
A: Yes. Both the run winding and start winding are brought out separately to 4 mm safety sockets in the overhead terminal box for experiments and measurements.
Q: Is thermal overload protection included?
A: Yes. The Single-Phase Split-Phase Induction Motor Trainer – SC-SPM 0250 includes thermal overload protection and has Class F insulation rated to 155°C.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








