🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Inductive Load Bank

Model SC-ILB 1074

The Inductive Load Bank – SC-ILB 1074 is a set of three identical iron-core inductor banks for single- and three-phase circuits. Each bank offers four taps (0.5 H, 1 H, 2 H, and 3 H) with rated currents from 2.5 A to 5 A at 50 Hz. The banks can be connected in series, parallel, star, or delta. A rotary tap selector, isolating switch, and active-tap LED are fitted to each bank. Each bank has a thermal fuse and test points, with 4 mm safety sockets for connections. It complies with IEC/EN 61010-1 and CE standards. English manuals and a tap rating table are included. It is ideal for reactive power, power factor, and inductive load experiments.

The Inductive Load Bank – SC-ILB 1074 is a set of three iron-core inductor banks for single- and three-phase circuits. It is used for reactive power and power factor experiments, with tap selection and active-tap indication.

Product Overview

The Inductive Load Bank – SC-ILB 1074 has three identical iron-core inductor banks. Each bank can be connected in series, parallel, star, or delta. Each bank has four taps: 0.5 H at 5 A, 1 H at 3.5 A, 2 H at 3 A, and 3 H at 2.5 A, all at 50 Hz. The corresponding impedances are 157, 314, 628, and 942 ohm. Each tap is rated for 230 V AC, 50 Hz continuous operation. Across a star connection, the rating is 400 V. The core is laminated iron. A rotary tap selector and isolating switch are fitted to each bank, with an LED indicating the active tap. Each bank has a thermal fuse for protection. Connections use 4 mm safety sockets, with test points on each bank. The unit complies with IEC/EN 61010-1 and CE standards, is class F and IP20, and a rating table is supplied.

Inductive Load Bank – SC-ILB 1074: Technical Specifications

Category Specification
Number of Banks 3 identical banks
Connection Options Series, parallel, star, delta
Tap 1 0.5 H; 5 A; 157 ohm at 50 Hz
Tap 2 1 H; 3.5 A; 314 ohm at 50 Hz
Tap 3 2 H; 3 A; 628 ohm at 50 Hz
Tap 4 3 H; 2.5 A; 942 ohm at 50 Hz
Rated Voltage 230 V AC, 50 Hz continuous per tap
Star Connection Voltage 400 V
Core Laminated iron
Switching Rotary tap selector and isolating switch per bank
Tap Indication LED for active tap
Protection Thermal fuse per bank
Connections 4 mm safety sockets; test points per bank
Compliance IEC/EN 61010-1; documentation reviewed per model
Insulation Class F
Enclosure IP20
Documentation Rating table supplied

Key Features

  • Three Identical Banks: series, parallel, star, or delta configurations
  • Four Tap Values: 0.5 H, 1 H, 2 H, 3 H for varied reactance
  • Tap Selection: rotary selector per bank with isolating switch
  • Active-Tap LED: clear indication of the selected tap
  • Laminated Iron Core: stable inductive performance
  • Thermal Fuse: protection on each bank
  • Test Points: access on each bank for measurement
  • Safety Sockets: 4 mm connections for secure wiring
  • Rating Table: tap ratings supplied for reference
  • Compliance: IEC/EN 61010-1, CE, class F, IP20

Experiments

  • Reactive power measurement at different inductance values
  • Power factor measurement and lagging power factor effects
  • Series and parallel inductor combination analysis
  • Star and delta connection of inductive loads
  • Impedance calculation from tap values at 50 Hz
  • Current and voltage phase relationship in inductive circuits
  • Power factor correction using capacitive banks
  • Current limiting effect of inductive loads
  • Comparison of tap ratings and current capacity
  • Three-phase inductive load balancing

Construction and Design

The Inductive Load Bank – SC-ILB 1074 contains three identical iron-core inductor banks. Each bank has a laminated iron core with four selectable taps. A rotary tap selector and isolating switch are fitted to each bank, with an LED showing the active tap. Test points and 4 mm safety sockets provide connection access. A thermal fuse protects each bank. The banks can be connected in series, parallel, star, or delta configurations.

Scope of Delivery

  • Inductive load bank
  • English manual with tap rating table

Q: What taps are available on each bank?
A: Each bank has four taps: 0.5 H at 5 A, 1 H at 3.5 A, 2 H at 3 A, and 3 H at 2.5 A, all at 50 Hz. The corresponding impedances are 157, 314, 628, and 942 ohm.

Q: What voltage rating applies?
A: Each tap is rated for 230 V AC, 50 Hz continuous operation. In a star connection, the rating across the star is 400 V.

Q: How do I know which tap is selected?
A: An LED indicates the active tap on each bank, and a rotary tap selector allows you to change it.

Q: Can the banks be combined?
A: Yes. The three identical banks can be connected in series, parallel, star, or delta configurations.

Q: Is each bank protected?
A: Yes. Each bank has a thermal fuse for protection, and a rating table is supplied with the unit.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Inductive Load Bank | SC-ILB 1074 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

TVET EquipmentsModel SC-ILB 1074
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SC-ILB 1074

Overview

The Inductive Load Bank – SC-ILB 1074 is a set of three iron-core inductor banks for single- and three-phase circuits. It is used for reactive power and power factor experiments, with tap selection and active-tap indication.

Product Overview

The Inductive Load Bank – SC-ILB 1074 has three identical iron-core inductor banks. Each bank can be connected in series, parallel, star, or delta. Each bank has four taps: 0.5 H at 5 A, 1 H at 3.5 A, 2 H at 3 A, and 3 H at 2.5 A, all at 50 Hz. The corresponding impedances are 157, 314, 628, and 942 ohm. Each tap is rated for 230 V AC, 50 Hz continuous operation. Across a star connection, the rating is 400 V. The core is laminated iron. A rotary tap selector and isolating switch are fitted to each bank, with an LED indicating the active tap. Each bank has a thermal fuse for protection. Connections use 4 mm safety sockets, with test points on each bank. The unit complies with IEC/EN 61010-1 and CE standards, is class F and IP20, and a rating table is supplied.

Key Features

Key Features

  • Three Identical Banks: series, parallel, star, or delta configurations
  • Four Tap Values: 0.5 H, 1 H, 2 H, 3 H for varied reactance
  • Tap Selection: rotary selector per bank with isolating switch
  • Active-Tap LED: clear indication of the selected tap
  • Laminated Iron Core: stable inductive performance
  • Thermal Fuse: protection on each bank
  • Test Points: access on each bank for measurement
  • Safety Sockets: 4 mm connections for secure wiring
  • Rating Table: tap ratings supplied for reference
  • Compliance: IEC/EN 61010-1, CE, class F, IP20

Experiments

  • Reactive power measurement at different inductance values
  • Power factor measurement and lagging power factor effects
  • Series and parallel inductor combination analysis
  • Star and delta connection of inductive loads
  • Impedance calculation from tap values at 50 Hz
  • Current and voltage phase relationship in inductive circuits
  • Power factor correction using capacitive banks
  • Current limiting effect of inductive loads
  • Comparison of tap ratings and current capacity
  • Three-phase inductive load balancing

Construction and Design

The Inductive Load Bank – SC-ILB 1074 contains three identical iron-core inductor banks. Each bank has a laminated iron core with four selectable taps. A rotary tap selector and isolating switch are fitted to each bank, with an LED showing the active tap. Test points and 4 mm safety sockets provide connection access. A thermal fuse protects each bank. The banks can be connected in series, parallel, star, or delta configurations.

Scope of Delivery

  • Inductive load bank
  • English manual with tap rating table

Specifications

Inductive Load Bank – SC-ILB 1074: Technical Specifications

Category Specification
Number of Banks 3 identical banks
Connection Options Series, parallel, star, delta
Tap 1 0.5 H; 5 A; 157 ohm at 50 Hz
Tap 2 1 H; 3.5 A; 314 ohm at 50 Hz
Tap 3 2 H; 3 A; 628 ohm at 50 Hz
Tap 4 3 H; 2.5 A; 942 ohm at 50 Hz
Rated Voltage 230 V AC, 50 Hz continuous per tap
Star Connection Voltage 400 V
Core Laminated iron
Switching Rotary tap selector and isolating switch per bank
Tap Indication LED for active tap
Protection Thermal fuse per bank
Connections 4 mm safety sockets; test points per bank
Compliance IEC/EN 61010-1; documentation reviewed per model
Insulation Class F
Enclosure IP20
Documentation Rating table supplied

Buying Inductive Load Bank: Distributor & Tender Guidance

Inductive Load Bank is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Inductive Load Bank as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What taps are available on each bank? A: Each bank has four taps: 0.5 H at 5 A, 1 H at 3.5 A, 2 H at 3 A, and 3 H at 2.5 A, all at 50 Hz. The corresponding impedances are 157, 314, 628, and 942 ohm.

Q: What voltage rating applies? A: Each tap is rated for 230 V AC, 50 Hz continuous operation. In a star connection, the rating across the star is 400 V.

Q: How do I know which tap is selected? A: An LED indicates the active tap on each bank, and a rotary tap selector allows you to change it.

Q: Can the banks be combined? A: Yes. The three identical banks can be connected in series, parallel, star, or delta configurations.

Q: Is each bank protected? A: Yes. Each bank has a thermal fuse for protection, and a rating table is supplied with the unit.

Related Guides & Resources

In-depth guides from Scientico on TVET Equipments lab setup, experiments and procurement.

Inductive Load Bank | SC-ILB 1074

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

IGBT Inverter Training Module by Scientico IndiaIGBT Inverter Training Module | SC-IGB 1083Industrial and Domestic Electrical Wiring Wall Training Kit by Scientico IndiaIndustrial and Domestic Electrical Wiring Wall Training Kit | SC-EWW 1091EV high-voltage safety training courseHigh-Voltage Electric Vehicle Safety Interactive Course | SC-HVS 2207Industrial Internet of Things (IIoT) Workbench by Scientico IndiaIndustrial Internet of Things (IIoT) Workbench | SCI IT 012Height Adjuster for Bench Vice by Scientico IndiaHeight Adjuster for Bench Vice | SCTV 48Industrial Motor Control Panel by Scientico IndiaIndustrial Motor Control Panel | SC-MCP 2424Gridded plug-in boardGridded Plug-in Board | SC-GPB 1085Industrial VFD Drive Trainer by Scientico IndiaIndustrial VFD Drive Trainer | SC-VFD 2315
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Inductive Load Bank | SC-ILB 1074