🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Electro Pneumatic and Mechatronics Training System with Conveyor

Model SC-EPM 1095

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation for pick-and-place and sorting. It has a dedicated Siemens S7-1214C PLC and an open interface for Item 11092 or any 24 V or 0–10 V PLC. The pneumatic system includes a 150 l/min oil-free compressor, FRL unit, and three 5/2 solenoid valves. Actuators include an auto-feeder, vane motor reject, and a vacuum pick-and-place unit. Capacitive, inductive, and photoelectric sensors are fitted. A 600 x 300 mm PWM-controlled conveyor and analogue pressure control are included. Test points, status LEDs, and 2 mm microcontroller headers support diagnosis and interfacing. Emergency stop, interlocked guards, and overcurrent and overpressure protection are fitted. It is documentation reviewed per model, including the Machinery Directive.

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation for electro-pneumatics, conveyor motion control, and analogue and digital interfacing. It is used for pick-and-place and sorting tasks, with its own dedicated PLC.

Product Overview

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 combines electro-pneumatics, conveyor motion control, and analogue and digital interfacing in one modular workstation. It is built for pick-and-place and sorting tasks. A dedicated Siemens S7-1214C CPU with AI/AO module and power supply controls the system. The interface also suits Item 11092 or any 24 V or 0–10 V PLC. The pneumatic system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver, an FRL unit with gauge, and a distribution manifold. Actuators include a pneumatic auto-feeder, a vane motor reject, and a pick-and-place unit with a guided cylinder, vane motor, and vacuum generator with cup. Three 5/2 double solenoid valves at 24 V DC drive the actuators. Capacitive, inductive, and photoelectric sensors provide detection. Analogue control includes a proportional pressure regulator (0–10 V, 0–6 bar) and a pressure transducer (0–10 bar, 0–10 V). The conveyor measures 600 x 300 mm, with a 24 V DC geared motor, PWM speed control with a 0–10 V input and potentiometer, a timing belt, and a PVC belt on an aluminium frame. Terminal blocks and 4 mm sockets carry all digital and analogue inputs and outputs, with 2 mm headers for a microcontroller, test points, and status LEDs. The system runs on 220–240 V AC with internal 24 V DC, 5 A and 5 V DC supplies. Safety features include an emergency stop, fixed interlocked guards, and overcurrent and overpressure protection. The unit is documentation reviewed per model, including the Machinery Directive.

Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095: Technical Specifications

Category Specification
PLC Siemens S7-1214C with AI/AO module and power supply
Interface Compatibility Item 11092; any 24 V or 0–10 V PLC
Operating Pressure 6–8 bar
Compressor Silent oil-free; 150 l/min; with receiver
Pneumatic Conditioning FRL unit with gauge; distribution manifold
Actuators Pneumatic auto-feeder; vane motor reject; pick-and-place with guided cylinder, vane motor and vacuum generator with cup
Valves 3 x 5/2 double solenoid, 24 V DC
Sensors Capacitive, inductive and photoelectric
Proportional Regulator 0–10 V; 0–6 bar
Pressure Transducer 0–10 bar; 0–10 V output
Conveyor Size 600 x 300 mm
Conveyor Drive 24 V DC geared motor; PWM speed control
Speed Control Input 0–10 V input and potentiometer
Conveyor Belt Timing belt; PVC belt on aluminium frame
Interface Terminal blocks and 4 mm sockets for DI, DO, AI, AO and power; 2 mm headers for microcontroller
Diagnostics Test points and status LEDs
Supply 220–240 V AC; internal 24 V DC, 5 A and 5 V DC
Safety Emergency stop; fixed interlocked guards; overcurrent and overpressure protection
Compliance documentation reviewed per model, including Machinery Directive

Key Features

  • Dedicated Siemens PLC: S7-1214C with AI/AO module and power supply
  • Open Interface: compatible with Item 11092 and any 24 V or 0–10 V PLC
  • Pneumatic Supply: silent oil-free 150 l/min compressor with receiver
  • Pick-and-Place Unit: guided cylinder, vane motor and vacuum cup
  • Pneumatic Feeding and Rejection: auto-feeder and vane motor reject
  • Solenoid Valves: three 5/2 double solenoid valves at 24 V DC
  • Sensing: capacitive, inductive and photoelectric sensors
  • Analogue Control: proportional pressure regulator and pressure transducer
  • Variable-Speed Conveyor: 600 x 300 mm with PWM and potentiometer control
  • Microcontroller Access: 2 mm headers for external microcontroller interfacing
  • Diagnostics: test points and status LEDs throughout
  • Safety Protection: emergency stop, interlocked guards, overcurrent and overpressure protection

Experiments

  • Pneumatic circuit design with 5/2 double solenoid valves
  • Guided cylinder control for pick-and-place motion
  • Vacuum generation and cup pick-up of objects
  • Auto-feeder operation and part dispensing
  • Vane motor reject action for sorting
  • Sensor detection with capacitive, inductive and photoelectric sensors
  • Conveyor speed control using PWM and 0–10 V input
  • Proportional pressure regulation between 0 and 6 bar
  • Pressure measurement and control with the transducer
  • Sorting logic based on sensor signals
  • PLC programming of the complete pick-and-place sequence
  • Interfacing an external microcontroller through 2 mm headers
  • Fault diagnosis using test points and status LEDs

Construction and Design

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation. The conveyor, pneumatic actuators, valves, sensors, and PLC are mounted on one frame. The conveyor is a 600 x 300 mm belt on an aluminium frame, driven by a 24 V DC geared motor. The pneumatic system is supplied by a silent oil-free compressor with receiver, FRL unit, and distribution manifold. Fixed interlocked guards protect moving parts. Terminal blocks and 4 mm sockets carry all field connections.

Scope of Delivery

  • Mechatronics workstation with conveyor and pick-and-place
  • Dedicated PLC
  • Compressor
  • English teacher and student manuals with PLC examples and troubleshooting guide

Q: Which PLC is included?
A: A dedicated Siemens S7-1214C CPU with AI/AO module and power supply.

Q: Can I use another PLC?
A: Yes. The interface also suits Item 11092 or any 24 V or 0–10 V PLC.

Q: What pneumatic pressure does the system use?
A: The system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver.

Q: What does the pick-and-place unit do?
A: It uses a guided cylinder, a vane motor and a vacuum generator with cup to pick and move parts.

Q: How is the conveyor speed controlled?
A: The 24 V DC geared motor uses PWM speed control, with a 0–10 V input and potentiometer.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Electro Pneumatic and Mechatronics Training System with Conveyor | SC-EPM 1095 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

TVET EquipmentsModel SC-EPM 1095
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
SC-EPM 1095

Overview

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation for electro-pneumatics, conveyor motion control, and analogue and digital interfacing. It is used for pick-and-place and sorting tasks, with its own dedicated PLC.

Product Overview

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 combines electro-pneumatics, conveyor motion control, and analogue and digital interfacing in one modular workstation. It is built for pick-and-place and sorting tasks. A dedicated Siemens S7-1214C CPU with AI/AO module and power supply controls the system. The interface also suits Item 11092 or any 24 V or 0–10 V PLC. The pneumatic system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver, an FRL unit with gauge, and a distribution manifold. Actuators include a pneumatic auto-feeder, a vane motor reject, and a pick-and-place unit with a guided cylinder, vane motor, and vacuum generator with cup. Three 5/2 double solenoid valves at 24 V DC drive the actuators. Capacitive, inductive, and photoelectric sensors provide detection. Analogue control includes a proportional pressure regulator (0–10 V, 0–6 bar) and a pressure transducer (0–10 bar, 0–10 V). The conveyor measures 600 x 300 mm, with a 24 V DC geared motor, PWM speed control with a 0–10 V input and potentiometer, a timing belt, and a PVC belt on an aluminium frame. Terminal blocks and 4 mm sockets carry all digital and analogue inputs and outputs, with 2 mm headers for a microcontroller, test points, and status LEDs. The system runs on 220–240 V AC with internal 24 V DC, 5 A and 5 V DC supplies. Safety features include an emergency stop, fixed interlocked guards, and overcurrent and overpressure protection. The unit is documentation reviewed per model, including the Machinery Directive.

Key Features

Key Features

  • Dedicated Siemens PLC: S7-1214C with AI/AO module and power supply
  • Open Interface: compatible with Item 11092 and any 24 V or 0–10 V PLC
  • Pneumatic Supply: silent oil-free 150 l/min compressor with receiver
  • Pick-and-Place Unit: guided cylinder, vane motor and vacuum cup
  • Pneumatic Feeding and Rejection: auto-feeder and vane motor reject
  • Solenoid Valves: three 5/2 double solenoid valves at 24 V DC
  • Sensing: capacitive, inductive and photoelectric sensors
  • Analogue Control: proportional pressure regulator and pressure transducer
  • Variable-Speed Conveyor: 600 x 300 mm with PWM and potentiometer control
  • Microcontroller Access: 2 mm headers for external microcontroller interfacing
  • Diagnostics: test points and status LEDs throughout
  • Safety Protection: emergency stop, interlocked guards, overcurrent and overpressure protection

Experiments

  • Pneumatic circuit design with 5/2 double solenoid valves
  • Guided cylinder control for pick-and-place motion
  • Vacuum generation and cup pick-up of objects
  • Auto-feeder operation and part dispensing
  • Vane motor reject action for sorting
  • Sensor detection with capacitive, inductive and photoelectric sensors
  • Conveyor speed control using PWM and 0–10 V input
  • Proportional pressure regulation between 0 and 6 bar
  • Pressure measurement and control with the transducer
  • Sorting logic based on sensor signals
  • PLC programming of the complete pick-and-place sequence
  • Interfacing an external microcontroller through 2 mm headers
  • Fault diagnosis using test points and status LEDs

Construction and Design

The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation. The conveyor, pneumatic actuators, valves, sensors, and PLC are mounted on one frame. The conveyor is a 600 x 300 mm belt on an aluminium frame, driven by a 24 V DC geared motor. The pneumatic system is supplied by a silent oil-free compressor with receiver, FRL unit, and distribution manifold. Fixed interlocked guards protect moving parts. Terminal blocks and 4 mm sockets carry all field connections.

Scope of Delivery

  • Mechatronics workstation with conveyor and pick-and-place
  • Dedicated PLC
  • Compressor
  • English teacher and student manuals with PLC examples and troubleshooting guide

Specifications

Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095: Technical Specifications

Category Specification
PLC Siemens S7-1214C with AI/AO module and power supply
Interface Compatibility Item 11092; any 24 V or 0–10 V PLC
Operating Pressure 6–8 bar
Compressor Silent oil-free; 150 l/min; with receiver
Pneumatic Conditioning FRL unit with gauge; distribution manifold
Actuators Pneumatic auto-feeder; vane motor reject; pick-and-place with guided cylinder, vane motor and vacuum generator with cup
Valves 3 x 5/2 double solenoid, 24 V DC
Sensors Capacitive, inductive and photoelectric
Proportional Regulator 0–10 V; 0–6 bar
Pressure Transducer 0–10 bar; 0–10 V output
Conveyor Size 600 x 300 mm
Conveyor Drive 24 V DC geared motor; PWM speed control
Speed Control Input 0–10 V input and potentiometer
Conveyor Belt Timing belt; PVC belt on aluminium frame
Interface Terminal blocks and 4 mm sockets for DI, DO, AI, AO and power; 2 mm headers for microcontroller
Diagnostics Test points and status LEDs
Supply 220–240 V AC; internal 24 V DC, 5 A and 5 V DC
Safety Emergency stop; fixed interlocked guards; overcurrent and overpressure protection
Compliance documentation reviewed per model, including Machinery Directive

Buying Electro Pneumatic and Mechatronics Training System with Conveyor: Distributor & Tender Guidance

Electro Pneumatic and Mechatronics Training System with Conveyor is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Electro Pneumatic and Mechatronics Training System with Conveyor as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: Which PLC is included? A: A dedicated Siemens S7-1214C CPU with AI/AO module and power supply.

Q: Can I use another PLC? A: Yes. The interface also suits Item 11092 or any 24 V or 0–10 V PLC.

Q: What pneumatic pressure does the system use? A: The system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver.

Q: What does the pick-and-place unit do? A: It uses a guided cylinder, a vane motor and a vacuum generator with cup to pick and move parts.

Q: How is the conveyor speed controlled? A: The 24 V DC geared motor uses PWM speed control, with a 0–10 V input and potentiometer.

Related Guides & Resources

In-depth guides from Scientico on TVET Equipments lab setup, experiments and procurement.

Electro Pneumatic and Mechatronics Training System with Conveyor | SC-EPM 1095

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Electrical Machines Set Trainer Panel by Scientico IndiaElectrical Machines Set Trainer Panel | SC-EMS 1900Automotive sensor training courseEngine Management Sensors Interactive Course | SC-ISM 2204Electrical and Electronic Component Training Kit by Scientico IndiaElectrical and Electronic Component Training Kit | SC-EEK 1084Function or Arbitrary Waveform Generator by Scientico IndiaFunction or Arbitrary Waveform Generator | SC-FGA 2020Digital Logic TrainerDigital Trainer Board | SC-DTB 0844Gas Nozzle by Scientico IndiaGas Nozzle | SCTV 21Digital Storage Oscilloscope by Scientico IndiaDigital Storage Oscilloscope | SC-DSO 1002MGas Nozzle Pliers by Scientico IndiaGas Nozzle Pliers | SCTV 30
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Electro Pneumatic and Mechatronics Training System with Conveyor | SC-EPM 1095