🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms
Make An Enquiry
Make an enquiry

Concrete Testing Lab Equipment: Complete List and IS Standards for Civil Engineering Colleges

By /

Introduction

The concrete testing laboratory is essential for B.Tech Civil Engineering students and for quality control in construction. It covers fresh concrete workability, mix design, curing, and hardened concrete strength tests, all governed by IS 456:2000 (Plain and Reinforced Concrete) and associated IS codes. This guide lists the standard equipment required for a complete concrete testing lab.

Fresh Concrete Tests, Workability Apparatus

Equipment IS Code Workability Test
Slump Cone Apparatus (Abrams Cone) IS 1199 Part 2 Slump test, most common site workability test
Compaction Factor Apparatus IS 1199 Part 3 Compaction factor test, medium/low workability concretes
Vee-Bee Consistometer IS 1199 Part 4 Vee-Bee degree, stiff and very stiff mixes
Flow Table Apparatus IS 1199 Part 5 Flow test, self-compacting concrete

Concrete Cube and Cylinder Moulds

Item Size Standard Purpose
Cube Moulds 150mm × 150mm × 150mm IS 10086 Compressive strength specimens
Cylinder Moulds 150mm dia × 300mm ASTM C39 Tensile split and compressive strength
Beam Moulds 150mm × 150mm × 700mm IS 516 Flexural strength (modulus of rupture)
Compaction Rod / Tamping Rod 16mm dia, 600mm long IS 516 Consolidation of concrete in moulds

Compression Testing Machine (CTM)

Need lab equipment for your institution?
Manufacturer of laboratory training equipment since 1993. Request pricing, technical information and an international quotation.
✓ Product-specific request · ✓ Destination-specific scope · ✓ No account required
Send an Enquiry

The Compression Testing Machine is the centrepiece of the concrete testing lab. Key specifications:

  • Capacity: 2000 kN (standard for civil engineering labs); 3000 kN for research
  • Platens: Hardened steel, 150mm × 150mm minimum
  • Loading rate: 140 kg/cm²/minute (IS 516 requirement)
  • Display: Digital load display with peak-hold function
  • Compliance: IS 14858, BIS certified

Curing Equipment

Equipment Purpose
Curing Tank (Water Bath, 1000L capacity) Water curing of concrete specimens at 27±2°C (IS 516)
Accelerated Curing Tank 80°C hot water curing for rapid strength assessment
Humidity Chamber Controlled humidity curing for specialty mixes

Concrete Mix Design and Aggregate Testing

Equipment IS Code Purpose
Sieve Set for Aggregates (80mm–75μm) IS 2386 Part 1 Particle size distribution of aggregates
Aggregate Impact Value Apparatus IS 2386 Part 4 Toughness of coarse aggregate
Aggregate Crushing Value Apparatus IS 2386 Part 4 Compressive strength of coarse aggregate
Los Angeles Abrasion Machine IS 2386 Part 4 Abrasion resistance of coarse aggregate
Flakiness and Elongation Index Gauge IS 2386 Part 1 Particle shape of coarse aggregate
Concrete Mixer (Pan type, 40L) – Batching and mixing of trial mixes

Non-Destructive Testing (NDT) Equipment

Equipment IS Code Purpose
Rebound Hammer (Schmidt Hammer) IS 13311 Part 2 Surface hardness / in-situ strength estimation
Ultrasonic Pulse Velocity (UPV) Meter IS 13311 Part 1 Concrete quality assessment, crack detection
Rebar Detector / Covermeter – Location and cover of reinforcement bars
Core Drilling Machine (100mm dia) IS 516 Extraction of cores from existing structures

Cement Testing Equipment

  • Vicat Apparatus, Initial and final setting time (IS 4031 Part 5)
  • Le Chatelier Apparatus, Soundness of cement (IS 4031 Part 3)
  • Blaine Air Permeability Apparatus, Fineness of cement (IS 4031 Part 2)
  • Cement Cube Moulds (70.6mm), Compressive strength of cement mortar (IS 4031 Part 6)

Procurement Tips

  • Ensure the CTM is BIS certified under IS 14858 and has a current calibration certificate from a NABL-accredited lab.
  • Rebound hammers must be calibrated every 6 months, check supplier service network.
  • Aggregate testing equipment should comply with IS 2386; compression testing to IS 516.
  • For NAAC accreditation, maintain calibration records for all measuring instruments.
Equipping a Lab? Get a model-specific quotation after technical review

Scientico India manufactures model-specific, ISO 9001:2015 laboratory equipment, exported to 30+ countries since 1993. Request a model-specific CIF proforma invoice after technical review.

View Engineering Lab Equipment →Request a Quote

Related Reading

One honest ask

We don't gate anything on this site. You just read the whole thing free. If it was useful, leave your email and two things happen: we send you this page as a plain-text block you can paste into a tender file or an internal email, and we notify you the next time we publish a buyer tool like this one. Nothing else. No drip sequence, no sales calls booked without asking.