Electro Pneumatic and Mechatronics Training System with Conveyor
Model SC-EPM 1095
The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation for pick-and-place and sorting. It has a dedicated Siemens S7-1214C PLC and an open interface for Item 11092 or any 24 V or 0–10 V PLC. The pneumatic system includes a 150 l/min oil-free compressor, FRL unit, and three 5/2 solenoid valves. Actuators include an auto-feeder, vane motor reject, and a vacuum pick-and-place unit. Capacitive, inductive, and photoelectric sensors are fitted. A 600 x 300 mm PWM-controlled conveyor and analogue pressure control are included. Test points, status LEDs, and 2 mm microcontroller headers support diagnosis and interfacing. Emergency stop, interlocked guards, and overcurrent and overpressure protection are fitted. It is documentation reviewed per model, including the Machinery Directive.
The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation for electro-pneumatics, conveyor motion control, and analogue and digital interfacing. It is used for pick-and-place and sorting tasks, with its own dedicated PLC.
Product Overview
The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 combines electro-pneumatics, conveyor motion control, and analogue and digital interfacing in one modular workstation. It is built for pick-and-place and sorting tasks. A dedicated Siemens S7-1214C CPU with AI/AO module and power supply controls the system. The interface also suits Item 11092 or any 24 V or 0–10 V PLC. The pneumatic system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver, an FRL unit with gauge, and a distribution manifold. Actuators include a pneumatic auto-feeder, a vane motor reject, and a pick-and-place unit with a guided cylinder, vane motor, and vacuum generator with cup. Three 5/2 double solenoid valves at 24 V DC drive the actuators. Capacitive, inductive, and photoelectric sensors provide detection. Analogue control includes a proportional pressure regulator (0–10 V, 0–6 bar) and a pressure transducer (0–10 bar, 0–10 V). The conveyor measures 600 x 300 mm, with a 24 V DC geared motor, PWM speed control with a 0–10 V input and potentiometer, a timing belt, and a PVC belt on an aluminium frame. Terminal blocks and 4 mm sockets carry all digital and analogue inputs and outputs, with 2 mm headers for a microcontroller, test points, and status LEDs. The system runs on 220–240 V AC with internal 24 V DC, 5 A and 5 V DC supplies. Safety features include an emergency stop, fixed interlocked guards, and overcurrent and overpressure protection. The unit is documentation reviewed per model, including the Machinery Directive.
Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095: Technical Specifications
| Category | Specification |
|---|---|
| PLC | Siemens S7-1214C with AI/AO module and power supply |
| Interface Compatibility | Item 11092; any 24 V or 0–10 V PLC |
| Operating Pressure | 6–8 bar |
| Compressor | Silent oil-free; 150 l/min; with receiver |
| Pneumatic Conditioning | FRL unit with gauge; distribution manifold |
| Actuators | Pneumatic auto-feeder; vane motor reject; pick-and-place with guided cylinder, vane motor and vacuum generator with cup |
| Valves | 3 x 5/2 double solenoid, 24 V DC |
| Sensors | Capacitive, inductive and photoelectric |
| Proportional Regulator | 0–10 V; 0–6 bar |
| Pressure Transducer | 0–10 bar; 0–10 V output |
| Conveyor Size | 600 x 300 mm |
| Conveyor Drive | 24 V DC geared motor; PWM speed control |
| Speed Control Input | 0–10 V input and potentiometer |
| Conveyor Belt | Timing belt; PVC belt on aluminium frame |
| Interface | Terminal blocks and 4 mm sockets for DI, DO, AI, AO and power; 2 mm headers for microcontroller |
| Diagnostics | Test points and status LEDs |
| Supply | 220–240 V AC; internal 24 V DC, 5 A and 5 V DC |
| Safety | Emergency stop; fixed interlocked guards; overcurrent and overpressure protection |
| Compliance | documentation reviewed per model, including Machinery Directive |
Key Features
- Dedicated Siemens PLC: S7-1214C with AI/AO module and power supply
- Open Interface: compatible with Item 11092 and any 24 V or 0–10 V PLC
- Pneumatic Supply: silent oil-free 150 l/min compressor with receiver
- Pick-and-Place Unit: guided cylinder, vane motor and vacuum cup
- Pneumatic Feeding and Rejection: auto-feeder and vane motor reject
- Solenoid Valves: three 5/2 double solenoid valves at 24 V DC
- Sensing: capacitive, inductive and photoelectric sensors
- Analogue Control: proportional pressure regulator and pressure transducer
- Variable-Speed Conveyor: 600 x 300 mm with PWM and potentiometer control
- Microcontroller Access: 2 mm headers for external microcontroller interfacing
- Diagnostics: test points and status LEDs throughout
- Safety Protection: emergency stop, interlocked guards, overcurrent and overpressure protection
Experiments
- Pneumatic circuit design with 5/2 double solenoid valves
- Guided cylinder control for pick-and-place motion
- Vacuum generation and cup pick-up of objects
- Auto-feeder operation and part dispensing
- Vane motor reject action for sorting
- Sensor detection with capacitive, inductive and photoelectric sensors
- Conveyor speed control using PWM and 0–10 V input
- Proportional pressure regulation between 0 and 6 bar
- Pressure measurement and control with the transducer
- Sorting logic based on sensor signals
- PLC programming of the complete pick-and-place sequence
- Interfacing an external microcontroller through 2 mm headers
- Fault diagnosis using test points and status LEDs
Construction and Design
The Electro-Pneumatic and Mechatronics Training System with Conveyor – SC-EPM 1095 is a modular workstation. The conveyor, pneumatic actuators, valves, sensors, and PLC are mounted on one frame. The conveyor is a 600 x 300 mm belt on an aluminium frame, driven by a 24 V DC geared motor. The pneumatic system is supplied by a silent oil-free compressor with receiver, FRL unit, and distribution manifold. Fixed interlocked guards protect moving parts. Terminal blocks and 4 mm sockets carry all field connections.
Scope of Delivery
- Mechatronics workstation with conveyor and pick-and-place
- Dedicated PLC
- Compressor
- English teacher and student manuals with PLC examples and troubleshooting guide
Q: Which PLC is included?
A: A dedicated Siemens S7-1214C CPU with AI/AO module and power supply.
Q: Can I use another PLC?
A: Yes. The interface also suits Item 11092 or any 24 V or 0–10 V PLC.
Q: What pneumatic pressure does the system use?
A: The system operates at 6–8 bar and includes a silent oil-free compressor of 150 l/min with receiver.
Q: What does the pick-and-place unit do?
A: It uses a guided cylinder, a vane motor and a vacuum generator with cup to pick and move parts.
Q: How is the conveyor speed controlled?
A: The 24 V DC geared motor uses PWM speed control, with a 0–10 V input and potentiometer.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








