Power Electronics Trainer Kit
Model SC-PET 1405
The Power Electronics Trainer Kit – SC-PET 1405 is a trainer for power semiconductor devices, including SCR, TRIAC, DIAC, MOSFET, IGBT, UJT and power diode. It covers device characteristics, R, RC, UJT and ramp-comparator firing circuits with firing angle from 0 to 180°, and single-phase half-wave and full-wave rectifiers. Isolated AC and DC supplies, resistive and lamp loads, supply fuses, and isolated oscilloscope test points are built in. Devices are mounted on heat sinks with printed symbols and 4 mm safety terminals. It runs on 230 V AC and includes a power cable, safety patch cords, and a user manual with experiments.
The Power Electronics Trainer Kit – SC-PET 1405 is a trainer for studying power semiconductor devices, their characteristics, triggering, and rectifier applications. The devices are mounted on heat sinks with clearly printed symbols and safety terminals.
Product Overview
The Power Electronics Trainer Kit – SC-PET 1405 is a trainer for studying power semiconductor devices, their characteristics, triggering, and rectifier applications. It runs from 230 V AC, 50 Hz. The devices included are a power diode, SCR, MOSFET, IGBT, UJT, TRIAC and DIAC, all mounted on heat sinks with printed symbols. Experiments cover V-I characteristics of the SCR, TRIAC and DIAC, transfer and output characteristics of the MOSFET and IGBT, and UJT characteristics. Firing circuits include R, RC and UJT types, plus ramp-comparator firing, with firing angle adjustable from 0 to 180 degrees. Rectifier experiments cover single-phase half-wave and full-wave circuits, both uncontrolled and controlled. Isolated AC supplies and DC supplies power the gate and device circuits. An on-board resistive load and lamp load are provided. Fuses protect the supplies, and isolated test points allow oscilloscope connection. Terminals are 4 mm safety types, with test points. The kit includes a power cable, safety patch cords and connectors, and a user manual with experiments.
Power Electronics Trainer Kit – SC-PET 1405: Technical Specifications
| Category | Specification |
|---|---|
| Power Input | 230 V AC, 50 Hz |
| Devices | Power diode; SCR; MOSFET; IGBT; UJT; TRIAC; DIAC |
| Device Characteristics | V-I of SCR, TRIAC and DIAC; transfer and output of MOSFET and IGBT; UJT |
| Firing Circuits | R; RC; UJT; ramp-comparator |
| Firing Angle | 0–180° |
| Rectifiers | Single-phase half-wave and full-wave; uncontrolled and controlled |
| Supplies | Isolated AC; DC for gate and device circuits |
| Loads | Resistive; lamp |
| Protection | Fuses on supplies |
| Test Points | Isolated, for oscilloscope |
| Terminals | 4 mm safety terminals |
| Mounting | Devices on heat sinks with printed symbols |
Key Features
- Seven Power Devices: power diode, SCR, MOSFET, IGBT, UJT, TRIAC and DIAC
- Device Characterisation: V-I, transfer and output characteristic experiments
- Multiple Firing Circuits: R, RC, UJT and ramp-comparator
- Adjustable Firing Angle: 0–180°
- Rectifier Experiments: single-phase half-wave and full-wave, uncontrolled and controlled
- Isolated Supplies: AC and DC supplies for gate and device circuits
- On-Board Loads: resistive and lamp loads
- Fuse Protection: fuses on supplies
- Oscilloscope Test Points: isolated points for safe waveform measurement
- Safety Terminals: 4 mm terminals with printed symbols on heat sinks
Experiments
- V-I characteristics of SCR, TRIAC and DIAC
- Transfer and output characteristics of MOSFET and IGBT
- UJT characteristic measurement
- R and RC firing circuit operation for SCR and TRIAC
- UJT relaxation oscillator firing circuit
- Ramp-comparator firing and firing angle control from 0 to 180°
- Single-phase half-wave uncontrolled and controlled rectifier operation
- Single-phase full-wave uncontrolled and controlled rectifier operation
- Output voltage and waveform measurement across resistive and lamp loads
- Waveform observation at isolated test points using an oscilloscope
Construction and Design
The Power Electronics Trainer Kit – SC-PET 1405 mounts its power devices on heat sinks, each with printed symbols. Firing circuits, rectifier circuits, and loads are built into the trainer. Isolated AC and DC supplies feed the gate and device circuits. Terminals are 4 mm safety types, and isolated test points are provided for oscilloscope measurement.
Scope of Delivery
- Trainer kit
- Power cable
- Set of safety patch cords / connectors
- User manual with experiments
Q: Which power devices are included?
A: A power diode, SCR, MOSFET, IGBT, UJT, TRIAC and DIAC.
Q: What firing circuits are provided?
A: R, RC and UJT firing circuits, plus ramp-comparator firing, with firing angle adjustable from 0 to 180°.
Q: What rectifier circuits are covered?
A: Single-phase half-wave and full-wave circuits, in both uncontrolled and controlled forms.
Q: Can I view waveforms safely?
A: Yes. The trainer has isolated test points for oscilloscope connection, along with 4 mm safety terminals.
Q: What loads are built in?
A: An on-board resistive load and a lamp load.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.








