Wetted Wall Gas Absorption Column: ReaktiLabX 16 Buyer Guide

A wetted-wall gas absorption column is a focused way to study mass transfer at a gas-liquid interface. Buyers should distinguish it from a packed gas-absorption tower before writing a laboratory BOQ: the apparatus geometry determines the learning task and measurements. Scientico’s Wetted Wall Gas Absorption Column | ReaktiLabX 16 product record describes oxygen uptake into deoxygenated water prepared by nitrogen sparging, a 900 mm glass wetted-wall column and a 1,570 mm clear acrylic deoxygenating column. It lists varying water mass flow rates for liquid-film mass-transfer calculations and an oxygen meter for saturation, concentration and temperature with automatic compensation.

Equipment mentioned in this guide

Review the product information, specifications and model before requesting a quotation.

Wetted Wall Gas Absorption Column | ReaktiLabX 16

The Wetted Wall Gas Absorption Column ReaktiLabX 16 is a bench-scale unit used to determine gas/liquid mass transfer coefficients, which are crucial for estimating the design of absorption towers. This wetted wall gas absorption column investigates the uptake of oxygen into deoxygenated water prepared by nitrogen sparging. It demonstrates controlled liquid film absorption.

View product details →

Match the apparatus to the mass-transfer question

The listed model focuses on the liquid film at a wetted wall and the absorption of oxygen into deoxygenated water. If the course needs students to calculate a liquid-film mass-transfer coefficient at different water flow rates, this record is relevant to evaluate. State that objective in the RFQ. If the course instead requires a packed column, gas mixture separation, pressure-drop study, flooding observation or another absorption arrangement, specify that separately and ask the supplier to confirm whether this model fits. A wetted wall column and a packed absorption column are not interchangeable names for the same equipment.

This distinction mirrors the useful structure of competing results: product listings often lead with “gas absorption column,” while technical teaching resources identify a particular column geometry and the variables students observe. Scientico should make the specific wetted-wall method and intended oxygen-uptake experiment explicit so buyers can compare like with like.

Verify the columns, measurements and supply interfaces

ReaktiLabX 16 is listed with two named columns: a glass wetted-wall section and a clear acrylic deoxygenating column. Ask for a current drawing that identifies each column’s overall size, connections, support arrangement and flow path. Confirm which pumps, tubing, oxygen meter, sensor connections and accessories are part of the quoted standard supply. The product summary names an oxygen meter, but buyers should still request the exact measurement range, display/output, calibration or verification procedure and supplied documentation for the offered meter.

Nitrogen sparging is identified as the way deoxygenated water is prepared. Ask which nitrogen connection, regulator or gas-supply equipment is included, if any, and what the institution must provide. Confirm water supply, circulation, filling/draining, electrical requirements and any ventilation or local safety controls with the supplier and the laboratory’s responsible officer. These are configuration questions; they are not claims that the product includes every gas or utility component.

Buyer comparison checklist

Do not price a packed column by analogy

Competitor catalogues may list packed absorption, wetted-wall columns and broader mass-transfer equipment on the same page. The buyer should not compare only the word “absorption.” Record the contact geometry, process pair, flow arrangement, measurement method, instrument scope and educational output. A packed column is typically specified around packing and column hydraulics; the ReaktiLabX 16 record instead foregrounds wetted-wall liquid-film measurement. Ask any bidder to explain how its proposed apparatus meets the requested experiment and where its data come from.

Set acceptance points around the intended experiment

Before the purchase order, decide which observations will show that the delivered arrangement is ready for the course: the two columns match the agreed drawing, the water and gas interfaces correspond to the quoted scope, the oxygen meter returns the agreed readings, and instructors can follow the documented experiment sequence. Record the witnesses, documents and open items in the project file. These acceptance points should be agreed between buyer and supplier for the chosen configuration; this article does not promise a particular factory or site test.

Prepare the purchase and acceptance schedule

• Exact model name and product revision.
• Wetted-wall and deoxygenating-column drawings, materials and flow-path description.
• Oxygen meter scope, range, display/output and supplied calibration or verification information.
• Nitrogen source and regulator/interface responsibilities, water services and electrical details.
• Included pump, tanks, tubing, fittings, gauges, accessories and consumables.
• Required site clearances, setup, filling/draining, cleaning and safety procedures.
• Manuals, experiment documentation, acceptance demonstration and a written list of exclusions/options.

Start with the Chemical Engineering equipment hub and the current Wetted Wall Gas Absorption Column | ReaktiLabX 16. Use the RFQ checklist to preserve the distinctions between standard scope, options and institution-provided services. Send the experiment, model, quantity, site services and destination through the enquiry page and ask the supplier to confirm the exact configuration in the written offer.

Explore the range: Start at the chemical-engineering equipment and procurement hub for related process-equipment resources.