🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Cut Model Turbo Charger

Model Torquemaster-04

Cut Model Turbo Charger Torquemaster-04 enhances student learning by showing how air intake on naturally aspirated engines can be boosted to increase power output. Built by a specialist Cut Model Turbo Charger manufacturer, this sectioned unit reveals the air intake, compression impeller, air outlet, exhaust gas outlet, and water cooling channel. It is constructed from actual automotive components and finished with automotive paints on sectioned parts. The compact model measures 400 x 400 x 300 mm (approx.) and weighs approximately 14kg.

The Cut Model Turbo Charger Torquemaster-04 enhances the student’s learning experience by showing the means by which air intake on naturally aspirated engines can be boosted, thereby increasing power output. As an experienced Cut Model Turbo Charger manufacturer, SCIENTICO Inida carefully sections each unit to reveal all key components and stages.

Product Overview

The Cut Model Turbo Charger Torquemaster-04 has been carefully cut open to reveal the air intake, compression impeller, air outlet, exhaust gas outlet and water cooling channel. A turbocharger is a form of supercharger. It increases the amount of air entering the engine to create more power. A turbocharger has the compressor powered by a turbine, and the exhaust gas drives the turbine from the engine. Turbochargers were originally known as turbo superchargers when all forced induction devices were classified as superchargers. Today the term supercharger is typically applied only to mechanically driven forced induction devices. The key difference between a turbocharger and a conventional supercharger is that a supercharger is mechanically driven by the engine, often through a belt connected to the crankshaft, whereas a turbocharger is powered by a turbine driven by the engine’s exhaust gas. As a specialist Cut Model Turbo Charger manufacturer, SCIENTICO builds this system using actual automotive components, finished with automotive paints on the sectioned parts.

Cut Model Turbo Charger Torquemaster-04 — Technical Specifications

Parameter Value
Air Intake Included
Compression Impeller Included
Air Outlet Included
Exhaust Gas Outlet Included
Water Cooling Channels Included
Length 400 mm (approx.)
Width 400 mm (approx.)
Height 300 mm (approx.)
Weight 14kg (approx.)

Technical Data

Turbocharger Components

Parameter Value
Air Intake Included
Compression Impeller Included
Air Outlet Included
Exhaust Gas Outlet Included
Water Cooling Channels Included

Dimensions and Weight

Parameter Value
Length 400 mm (approx.)
Width 400 mm (approx.)
Height 300 mm (approx.)
Weight 14kg (approx.)

Key Features

  • Study Focus: Designed for studying the turbocharger used in automobiles
  • Component Origin: Built using actual automotive components
  • Finish: Automotive paints used for painting sectioned parts
  • Visible Components: Air intake, compression impeller, air outlet, exhaust gas outlet, water cooling channel
  • Working Principle Demonstrated: Compressor powered by a turbine driven by exhaust gas
  • Educational Value: Shows how air intake on naturally aspirated engines can be boosted
  • Manufacturing Standard: Produced by a reliable Cut Model Turbo Charger manufacturer for automotive training

Construction and Design

The Cut Model Turbo Charger Torquemaster-04 has been carefully cut open to reveal all key components and stages. These include the air intake, compression impeller, air outlet, exhaust gas outlet and water cooling channel. The turbocharger is a form of supercharger that increases the amount of air entering the engine to create more power. The compressor is powered by a turbine, which is driven by exhaust gas from the engine. The system is built using actual automotive components. Automotive paints are used for painting the sectioned parts. This construction allows the Cut Model Turbo Charger to clearly demonstrate the difference between a turbocharger, which is powered by exhaust gas, and a conventional supercharger, which is mechanically driven by the engine through a belt connected to the crankshaft.

Q: What is the Cut Model Turbo Charger Torquemaster-04 used for?
A: It is designed to study the turbocharger used in automobiles, showing how air intake on naturally aspirated engines can be boosted to increase power output.

Q: What components are visible on the cutaway model?
A: Air intake, compression impeller, air outlet, exhaust gas outlet, and water cooling channel.

Q: What is the difference between a turbocharger and a supercharger?
A: A supercharger is mechanically driven by the engine, often through a belt connected to the crankshaft, while a turbocharger is powered by a turbine driven by the engine’s exhaust gas.

Q: What materials and components are used to build the model?
A: The system is built using actual automotive components, with automotive paints used for painting sectioned parts.

Q: What are the dimensions and weight of the model?
A: L x W x H (approx.): 400 x 400 x 300 mm, weight (approx.): 14kg.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Cut Model Turbo Charger | Torquemaster-04 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Automobile Engineering Lab EquipmentModel Torquemaster-04
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
Torquemaster-04

Overview

The Cut Model Turbo Charger Torquemaster-04 enhances the student's learning experience by showing the means by which air intake on naturally aspirated engines can be boosted, thereby increasing power output. As an experienced Cut Model Turbo Charger manufacturer, SCIENTICO Inida carefully sections each unit to reveal all key components and stages.

Product Overview

The Cut Model Turbo Charger Torquemaster-04 has been carefully cut open to reveal the air intake, compression impeller, air outlet, exhaust gas outlet and water cooling channel. A turbocharger is a form of supercharger. It increases the amount of air entering the engine to create more power. A turbocharger has the compressor powered by a turbine, and the exhaust gas drives the turbine from the engine. Turbochargers were originally known as turbo superchargers when all forced induction devices were classified as superchargers. Today the term supercharger is typically applied only to mechanically driven forced induction devices. The key difference between a turbocharger and a conventional supercharger is that a supercharger is mechanically driven by the engine, often through a belt connected to the crankshaft, whereas a turbocharger is powered by a turbine driven by the engine's exhaust gas. As a specialist Cut Model Turbo Charger manufacturer, SCIENTICO builds this system using actual automotive components, finished with automotive paints on the sectioned parts.

Key Features

Key Features

  • Study Focus: Designed for studying the turbocharger used in automobiles
  • Component Origin: Built using actual automotive components
  • Finish: Automotive paints used for painting sectioned parts
  • Visible Components: Air intake, compression impeller, air outlet, exhaust gas outlet, water cooling channel
  • Working Principle Demonstrated: Compressor powered by a turbine driven by exhaust gas
  • Educational Value: Shows how air intake on naturally aspirated engines can be boosted
  • Manufacturing Standard: Produced by a reliable Cut Model Turbo Charger manufacturer for automotive training

Construction and Design

The Cut Model Turbo Charger Torquemaster-04 has been carefully cut open to reveal all key components and stages. These include the air intake, compression impeller, air outlet, exhaust gas outlet and water cooling channel. The turbocharger is a form of supercharger that increases the amount of air entering the engine to create more power. The compressor is powered by a turbine, which is driven by exhaust gas from the engine. The system is built using actual automotive components. Automotive paints are used for painting the sectioned parts. This construction allows the Cut Model Turbo Charger to clearly demonstrate the difference between a turbocharger, which is powered by exhaust gas, and a conventional supercharger, which is mechanically driven by the engine through a belt connected to the crankshaft.

Specifications

Cut Model Turbo Charger Torquemaster-04 — Technical Specifications

Parameter Value
Air Intake Included
Compression Impeller Included
Air Outlet Included
Exhaust Gas Outlet Included
Water Cooling Channels Included
Length 400 mm (approx.)
Width 400 mm (approx.)
Height 300 mm (approx.)
Weight 14kg (approx.)

Technical Data

Turbocharger Components

Parameter Value
Air Intake Included
Compression Impeller Included
Air Outlet Included
Exhaust Gas Outlet Included
Water Cooling Channels Included

Dimensions and Weight

Parameter Value
Length 400 mm (approx.)
Width 400 mm (approx.)
Height 300 mm (approx.)
Weight 14kg (approx.)

Buying Cut Model Turbo Charger: Distributor & Tender Guidance

Cut Model Turbo Charger is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Cut Model Turbo Charger as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q: What is the Cut Model Turbo Charger Torquemaster-04 used for? A: It is designed to study the turbocharger used in automobiles, showing how air intake on naturally aspirated engines can be boosted to increase power output.

Q: What components are visible on the cutaway model? A: Air intake, compression impeller, air outlet, exhaust gas outlet, and water cooling channel.

Q: What is the difference between a turbocharger and a supercharger? A: A supercharger is mechanically driven by the engine, often through a belt connected to the crankshaft, while a turbocharger is powered by a turbine driven by the engine's exhaust gas.

Q: What materials and components are used to build the model? A: The system is built using actual automotive components, with automotive paints used for painting sectioned parts.

Q: What are the dimensions and weight of the model? A: L x W x H (approx.): 400 x 400 x 300 mm, weight (approx.): 14kg.

Related Guides & Resources

In-depth guides from Scientico on Automobile Engineering lab setup, experiments and procurement.

Cut Model Turbo Charger | Torquemaster-04

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Cut-Model-Of-Single-Cylinder-Four-Stroke-Petrol-EngineCut Model Of Single Cylinder Four Stroke Petrol Engine | Torquemaster-38Cut Section Model of Automatic Transmission by Scientico IndiaCut Section Model of Automatic Transmission | Torquemaster-01Cut Model of Single Cylinder Four Stroke Diesel Engine by Scientico IndiaCut Model of Single Cylinder Four Stroke Diesel Engine | Torquemaster-07Cut Section Model of Four Stroke Petrol Engine by Scientico IndiaCut Section Model of Four Stroke Petrol Engine | Torquemaster-34Cut Model of Self Starting System by Scientico IndiaCut Model of Self Starting System | Torquemaster-33Cut Section Model of Rack and Pinion Steering by Scientico IndiaCut Section Model of Rack and Pinion Steering | Torquemaster-25Cut Model of Rear Axle with Locking Differential by Scientico IndiaCut Model of Rear Axle with Locking Differential | Torquemaster-06Distributor Ignition System Trainer by Scientico IndiaDistributor Ignition System Trainer | Torquemaster-40
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Cut Model Turbo Charger | Torquemaster-04