Section Vehicle Chassis Trainer | Torquemaster-08
Section Vehicle Chassis Trainer Torquemaster-08 is built with a complete functional chassis of an actual car, didactically prepared for training use. This Section Vehicle Chassis Trainer features an original driver’s seat, four steel wheels with new tires, and a rear-mounted push handle for easy maneuvering. Axle components carry full adjustment settings for lead, caster, camber, toe, spreading, wheel offset, and thrust angle. It is suited for both structural demonstration and brake system repair training.
The Section Vehicle Chassis Trainer Torquemaster-08 is built with a complete functional chassis of an actual car, didactically prepared for training use. This Section Vehicle Chassis Trainer allows the attachment of additional systems for extended demonstration.
Product Overview
The Torquemaster-08 is constructed on a grid tube frame fitted with an original driver’s seat with all available options. Holding and lashing points allow the chassis to be fixed on test benches. The chassis rolls on four steel wheels fitted with new tires, and a rear-mounted push handle makes maneuvering easier. The axle components carry all settings including lead, caster, camber, toe, spreading, wheel offset, and thrust angle. The rear axle is equipped with eccentrics and engraved timing marks. This Section Vehicle Chassis Trainer serves as a visual aid for mechanical subjects, demonstrating chassis structure and components, and can also be used for brake system repair and service training.
Planning an automobile lab? See the automobile engineering equipment and model-selection guide.
Section Vehicle Chassis Trainer Torquemaster-08 — Technical Specifications
| Parameter | Value |
|---|---|
| Model | Torquemaster-08 |
| Chassis Base | Complete functional chassis of an actual car |
| Frame Construction | Tubular steel frame, square section tube for lateral and side rails |
| Joints | Continuously welded |
| Structural Support | Crossbars for rigid structure |
| Colour | Available in any colour |
| Operation | Manual |
| Equipment Layout | On base with wheels |
| Finish | Fine finish |
| Length x Width x Height (approx.) | 3200 x 1500 x 900 mm |
| Weight (approx.) | 650 kg |
Technical Data
| Component | Detail |
|---|---|
| Seat | Original driver’s seat with all available options |
| Wheels | Four steel wheels with new tires |
| Maneuvering Aid | Rear-mounted push handle |
| Axle Settings | Lead, caster, camber, toe, spreading, wheel offset, thrust angle |
| Rear Axle | Equipped with eccentrics and engraved timing marks |
| Mounting | Holding and lashing points for fixing on test benches |
Key Features
- Chassis Base: Made of an actual car
- Operation: Manual
- Layout: On base with wheels
- Finish: Fine finish
- Handling: Simple operations
- Accuracy: Functional accuracy
- Design: Section Vehicle Chassis Trainer with adjustable axle settings for lead, caster, camber, toe, spreading, wheel offset, and thrust angle
Experiments
- Study of chassis structure and components
- Study of axle settings: lead, caster, camber, toe, spreading, wheel offset, thrust angle
- Brake system repair and service procedure training
- Study of rear axle eccentrics and timing marks
- Attachment and study of additional chassis-mounted systems
Construction and Design
The Section Vehicle Chassis Trainer Torquemaster-08 is built on a tubular steel frame using square section tube for the lateral and side rails. All joints are continuously welded, and crossbars provide a rigid structure. The chassis is mounted on a grid tube frame fitted with an original driver’s seat with all available options. It rolls on four steel wheels with new tires and includes a rear-mounted push handle for maneuvering. Holding and lashing points allow fixing on test benches. The chassis is available in any colour.
Scope of Delivery
- Complete functional car chassis on tubular steel frame
- Original driver’s seat with all available options
- Four steel wheels with new tires
- Rear-mounted push handle
- Holding and lashing fixtures for test bench mounting
Q1: What is the Section Vehicle Chassis Trainer Torquemaster-08 built from?
A: It is built from a complete functional chassis of an actual car, didactically prepared for training.
Q2: What axle settings can be demonstrated on this trainer?
A: Lead, caster, camber, toe, spreading, wheel offset, and thrust angle can all be demonstrated.
Q3: Can this trainer be used for brake system training?
A: Yes, it can be used as educational equipment for brake system repair and service procedures.
Q4: How is the chassis mounted for testing?
A: Holding and lashing points allow the chassis to be fixed securely on test benches.
Q5: What are the dimensions and weight of the trainer?
A: The approximate dimensions are 3200 x 1500 x 900 mm, with an approximate weight of 650 kg.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.
