🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Deformation of Frame

Model FortiTestX-42

The Deformation of Frame FortiTestX-42 is a structural mechanics laboratory unit for investigating frame deformation under load using U-shaped and S-shaped steel frames (600 x 600 mm, 20 x 10 mm cross-section). This deformation of frame apparatus supports statically determinate and indeterminate configurations via a roller bearing on the free end, with two dial gauges recording deflection at 0.01 mm resolution across a 0 to 20 mm range. Two weight sets with movable hooks apply loads at adjustable positions, and analytical methods including first-order elasticity theory, superposition, and virtual work are covered in full. Four optional frame variants extend the unit to portal, redundant, and unsymmetrical frame geometries.

Short Introduction

The Deformation of Frame FortiTestX-42 is a structural mechanics laboratory unit for investigating the deformation behaviour of steel frames under load. This deformation of frame apparatus covers both statically determinate and indeterminate conditions using U-shaped and S-shaped steel frames, with two dial gauges recording deflection at 0.01 mm resolution. It supports application of first-order elasticity theory, the principle of superposition, and the principle of virtual work within a single self-contained setup.

Product Overview

The Deformation of Frame FortiTestX-42 provides a comprehensive experimental platform for studying frame deformation, bending moment characteristics, and support reactions under varied loading conditions. The unit includes two steel frames: a U-shaped frame (600 x 600 mm) representing standard portal construction as found in hall structures, and an S-shaped frame (600 x 600 mm) for demonstrating the applicability of analytical methods to non-standard frame geometries. The U-shaped frame is clamped at one end; the opposite end can be left free for statically determinate analysis or fitted with a roller bearing for statically indeterminate investigation. Two sets of weights with movable hooks apply loads at adjustable positions along the frame. Two dial gauges with a 0 to 20 mm measuring range and 0.01 mm graduation record frame deformations under load. Bending moment characteristics are determined using first-order elasticity theory, the principle of superposition, and the principle of virtual work. The differential equation of the bent line is constructed from these characteristic curves and an integrals chart. Displacements and support forces at the movable bearing are calculated from the bent line and its derivatives. This deformation of frame unit stores all components in an organised storage system within a self-contained experimental frame. Optional frame variants FX-42A, FX-42B, FX-42C, and FX-42D extend the apparatus to portal frames with overhanging ends, redundant square frames, unsymmetrical portals, and square portal frames.

Deformation of Frame FortiTestX-42, Technical Specifications

Parameter Detail
Model Reference FortiTestX-42
Category Strength of Materials and Structures
Frame Material Steel
Frame Edge Length 600 mm
Frame Cross-Section 20 x 10 mm
U-Shaped Frame Dimensions 600 x 600 mm
S-Shaped Frame Dimensions 600 x 600 mm
Frames Included 2 (U-shaped and S-shaped)
Support Configuration Statically determinate (free end) or indeterminate (roller bearing)
Clamping 1 long clamping pillar, 1 short clamping pillar
Load Application 2 sets of weights with movable hooks, adjustable to any load application point
Dial Gauge Measuring Range 0 to 20 mm
Dial Gauge Graduation 0.01 mm
Dial Gauges Included 2
Storage Dedicated component storage system
Instruction Manual Included

Technical Data

Steel Frames

Parameter Value
Material Steel
Edge Length 600 mm
Cross-Section 20 x 10 mm
U-Shaped Frame 600 x 600 mm
S-Shaped Frame 600 x 600 mm

Dial Gauges

Parameter Value
Measuring Range 0 to 20 mm
Graduation 0.01 mm

Weight Sets

Weight Quantity
0.5 N hanger weights 2
1 N weights 8
5 N weights 4

Key Features

  • Frame Geometry: two steel frames, U-shaped and S-shaped, each 600 x 600 mm, 20 x 10 mm cross-section
  • Support Configuration: this deformation of frame apparatus switches between statically determinate and indeterminate by adding a roller bearing to the free end
  • Clamping System: 1 long and 1 short clamping pillar for secure frame mounting
  • Load Application: 2 weight sets with movable hooks, adjustable to any load application point along the frame
  • Deformation Measurement: 2 dial gauges, 0 to 20 mm range, 0.01 mm graduation
  • Weight Set Included: 2x 0.5 N hangers, 8x 1 N, 4x 5 N
  • Analytical Methods Covered: first-order elasticity theory, principle of superposition, principle of virtual work
  • S-Shaped Frame: demonstrates applicability of analytical methods to non-standard frame geometries
  • Storage and Frame: all components organised in dedicated storage system within a self-contained experimental frame
  • Optional Variants: FX-42A portal with overhanging ends, FX-42B redundant square frame, FX-42C unsymmetrical portal, FX-42D square portal frame

Experiments

  • Relationship between load application and deformation on the frame
  • Differences between statically determinate and statically indeterminate frames
  • Familiarisation with first-order elasticity theory for statically determinate and indeterminate systems
  • Application of the principle of superposition
  • Application of the principle of virtual work on statically determinate and statically indeterminate frames
  • Determination of a deformation by the principle of virtual forces
  • Determination of a load by the principle of virtual displacement
  • Comparison of calculated and measured deformations

Construction and Design

The Deformation of Frame FortiTestX-42 is built around two steel frames, each with a 600 x 600 mm plan dimension and a 20 x 10 mm rectangular cross-section. The U-shaped frame replicates standard portal construction geometry as used in hall structures. One end is clamped using a long or short clamping pillar; the opposite end is left free for statically determinate experiments or fitted with a roller bearing for statically indeterminate analysis. The S-shaped frame is included to demonstrate that the same analytical methods apply to non-standard frame geometries. Two sets of weights with movable hooks load the frame at any chosen application point. Two dial gauges with a 0 to 20 mm range and 0.01 mm graduation record the deformations of this deformation of frame unit under load. Bending moment characteristics are derived using first-order elasticity theory, superposition, and virtual work principles. The differential equation of the bent line, constructed from characteristic curves and an integrals chart, yields displacements and support forces at the roller bearing. All components are housed in an integrated storage system within the experimental frame.

Scope of Delivery

  • 1 experimental unit
  • 1 instruction manual
  • 2 sets of weights
  • 2 dial gauges
  • 1 thread
  • 2 frames

Optional Accessories

  • FX-42A: Portal with overhanging ends
  • FX-42B: Redundant square frame
  • FX-42C: Unsymmetrical portal
  • FX-42D: Square portal frame

Q1: Can the Deformation of Frame FortiTestX-42 be configured for both statically determinate and indeterminate conditions?
Yes. The free end of the U-shaped frame can be left unconstrained for statically determinate experiments, or fitted with a roller bearing to create a statically indeterminate condition.

Q2: What frame geometries are included with this deformation of frame apparatus?
Two frames are included: a U-shaped frame (600 x 600 mm) for standard portal frame experiments and an S-shaped frame (600 x 600 mm) for demonstrating method applicability to non-standard geometries.

Q3: What analytical methods does the FortiTestX-42 support?
The unit supports first-order elasticity theory, the principle of superposition, and the principle of virtual work, including determination of deformations by virtual forces and loads by virtual displacement.

Q4: What is the resolution of the dial gauges?
The dial gauges have a graduation of 0.01 mm and a measuring range of 0 to 20 mm.

Q5: Are additional frame configurations available?
Yes. Four optional frame variants are available: FX-42A (portal with overhanging ends), FX-42B (redundant square frame), FX-42C (unsymmetrical portal), and FX-42D (square portal frame).

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Deformation of Frame | FortiTestX-42 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Plan the experiment before confirming this machine

Use the selection hub to verify that this equipment matches the required learning outcome. Confirm the offered configuration, range, accessories, utilities and documentation from this product record and datasheet.

Choose by required outcomeBrowse all Strength of Materials equipment
Strength of MaterialsModel FortiTestX-42
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
FortiTestX-42

Overview

Short Introduction

The Deformation of Frame FortiTestX-42 is a structural mechanics laboratory unit for investigating the deformation behaviour of steel frames under load. This deformation of frame apparatus covers both statically determinate and indeterminate conditions using U-shaped and S-shaped steel frames, with two dial gauges recording deflection at 0.01 mm resolution. It supports application of first-order elasticity theory, the principle of superposition, and the principle of virtual work within a single self-contained setup.

Product Overview

The Deformation of Frame FortiTestX-42 provides a comprehensive experimental platform for studying frame deformation, bending moment characteristics, and support reactions under varied loading conditions. The unit includes two steel frames: a U-shaped frame (600 x 600 mm) representing standard portal construction as found in hall structures, and an S-shaped frame (600 x 600 mm) for demonstrating the applicability of analytical methods to non-standard frame geometries. The U-shaped frame is clamped at one end; the opposite end can be left free for statically determinate analysis or fitted with a roller bearing for statically indeterminate investigation. Two sets of weights with movable hooks apply loads at adjustable positions along the frame. Two dial gauges with a 0 to 20 mm measuring range and 0.01 mm graduation record frame deformations under load. Bending moment characteristics are determined using first-order elasticity theory, the principle of superposition, and the principle of virtual work. The differential equation of the bent line is constructed from these characteristic curves and an integrals chart. Displacements and support forces at the movable bearing are calculated from the bent line and its derivatives. This deformation of frame unit stores all components in an organised storage system within a self-contained experimental frame. Optional frame variants FX-42A, FX-42B, FX-42C, and FX-42D extend the apparatus to portal frames with overhanging ends, redundant square frames, unsymmetrical portals, and square portal frames.

Key Features

Key Features

  • Frame Geometry: two steel frames, U-shaped and S-shaped, each 600 x 600 mm, 20 x 10 mm cross-section
  • Support Configuration: this deformation of frame apparatus switches between statically determinate and indeterminate by adding a roller bearing to the free end
  • Clamping System: 1 long and 1 short clamping pillar for secure frame mounting
  • Load Application: 2 weight sets with movable hooks, adjustable to any load application point along the frame
  • Deformation Measurement: 2 dial gauges, 0 to 20 mm range, 0.01 mm graduation
  • Weight Set Included: 2x 0.5 N hangers, 8x 1 N, 4x 5 N
  • Analytical Methods Covered: first-order elasticity theory, principle of superposition, principle of virtual work
  • S-Shaped Frame: demonstrates applicability of analytical methods to non-standard frame geometries
  • Storage and Frame: all components organised in dedicated storage system within a self-contained experimental frame
  • Optional Variants: FX-42A portal with overhanging ends, FX-42B redundant square frame, FX-42C unsymmetrical portal, FX-42D square portal frame

Experiments

  • Relationship between load application and deformation on the frame
  • Differences between statically determinate and statically indeterminate frames
  • Familiarisation with first-order elasticity theory for statically determinate and indeterminate systems
  • Application of the principle of superposition
  • Application of the principle of virtual work on statically determinate and statically indeterminate frames
  • Determination of a deformation by the principle of virtual forces
  • Determination of a load by the principle of virtual displacement
  • Comparison of calculated and measured deformations

Construction and Design

The Deformation of Frame FortiTestX-42 is built around two steel frames, each with a 600 x 600 mm plan dimension and a 20 x 10 mm rectangular cross-section. The U-shaped frame replicates standard portal construction geometry as used in hall structures. One end is clamped using a long or short clamping pillar; the opposite end is left free for statically determinate experiments or fitted with a roller bearing for statically indeterminate analysis. The S-shaped frame is included to demonstrate that the same analytical methods apply to non-standard frame geometries. Two sets of weights with movable hooks load the frame at any chosen application point. Two dial gauges with a 0 to 20 mm range and 0.01 mm graduation record the deformations of this deformation of frame unit under load. Bending moment characteristics are derived using first-order elasticity theory, superposition, and virtual work principles. The differential equation of the bent line, constructed from characteristic curves and an integrals chart, yields displacements and support forces at the roller bearing. All components are housed in an integrated storage system within the experimental frame.

Scope of Delivery

  • 1 experimental unit
  • 1 instruction manual
  • 2 sets of weights
  • 2 dial gauges
  • 1 thread
  • 2 frames

Optional Accessories

  • FX-42A: Portal with overhanging ends
  • FX-42B: Redundant square frame
  • FX-42C: Unsymmetrical portal
  • FX-42D: Square portal frame

Specifications

Deformation of Frame FortiTestX-42, Technical Specifications
Parameter Detail
Model Reference FortiTestX-42
Category Strength of Materials and Structures
Frame Material Steel
Frame Edge Length 600 mm
Frame Cross-Section 20 x 10 mm
U-Shaped Frame Dimensions 600 x 600 mm
S-Shaped Frame Dimensions 600 x 600 mm
Frames Included 2 (U-shaped and S-shaped)
Support Configuration Statically determinate (free end) or indeterminate (roller bearing)
Clamping 1 long clamping pillar, 1 short clamping pillar
Load Application 2 sets of weights with movable hooks, adjustable to any load application point
Dial Gauge Measuring Range 0 to 20 mm
Dial Gauge Graduation 0.01 mm
Dial Gauges Included 2
Storage Dedicated component storage system
Instruction Manual Included
Technical Data Steel Frames
Parameter Value
Material Steel
Edge Length 600 mm
Cross-Section 20 x 10 mm
U-Shaped Frame 600 x 600 mm
S-Shaped Frame 600 x 600 mm
Dial Gauges
Parameter Value
Measuring Range 0 to 20 mm
Graduation 0.01 mm
Weight Sets
Weight Quantity
0.5 N hanger weights 2
1 N weights 8
5 N weights 4

Buying Deformation of Frame: Distributor & Tender Guidance

Deformation of Frame is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for mechanics-of-materials teaching where students apply load and measure stress, strain, deflection, hardness, impact or failure behaviour.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and loading method, capacity and resolution, specimen details, gauges or indicators, accessories, safety guards and test standards requested by the buyer. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Deformation of Frame as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Confirm capacity, specimen compatibility and measurement method line by line before treating two testing systems as equivalent. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q1: Can the Deformation of Frame FortiTestX-42 be configured for both statically determinate and indeterminate conditions? Yes. The free end of the U-shaped frame can be left unconstrained for statically determinate experiments, or fitted with a roller bearing to create a statically indeterminate condition.

Q2: What frame geometries are included with this deformation of frame apparatus? Two frames are included: a U-shaped frame (600 x 600 mm) for standard portal frame experiments and an S-shaped frame (600 x 600 mm) for demonstrating method applicability to non-standard geometries.

Q3: What analytical methods does the FortiTestX-42 support? The unit supports first-order elasticity theory, the principle of superposition, and the principle of virtual work, including determination of deformations by virtual forces and loads by virtual displacement.

Q4: What is the resolution of the dial gauges? The dial gauges have a graduation of 0.01 mm and a measuring range of 0 to 20 mm.

Q5: Are additional frame configurations available? Yes. Four optional frame variants are available: FX-42A (portal with overhanging ends), FX-42B (redundant square frame), FX-42C (unsymmetrical portal), and FX-42D (square portal frame).

Deformation of Frame | FortiTestX-42

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Deformation of Curved Beam | FortiTestX – 13, model-specific lab equipment manufactured by Scientico IndiaDeformation of Curved Beam | FortiTestX – 13Equilibrium of a Beam by Scientico IndiaEquilibrium of a Beam | FortiTestX – 52Deflection of Beam Apparatus | FortiTestX 06, Scientico IndiaDeflection of Beam Apparatus | FortiTestX 06Equilibrium of a Rigid Body by Scientico IndiaEquilibrium of a Rigid Body | FortiTestX – 51Creep Testing Machine | FortiTestX – 14, model-specific lab equipment manufactured by Scientico IndiaCreep Testing Machine | FortiTestX – 14Equilibrium of Forces by Scientico IndiaEquilibrium of Forces | FortiTestX – 50Continuous and Indeterminate Beams Apparatus | FortiTestX 07, Scientico IndiaContinuous and Indeterminate Beams Apparatus | FortiTestX 07Extension and Compression of Spring Apparatus | FortiTestX 03, Scientico IndiaExtension and Compression of Spring Apparatus | FortiTestX 03
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Deformation of Frame | FortiTestX-42