🔎 Manufacturer-direct laboratory equipment enquiries - Request a model-specific international quotation →
✓ Established 1993 ✓ Model-Specific Specifications ✓ Manufacturer-Direct Enquiries ✓ International Quotations ✓ Destination-Based Delivery Terms

Section Vehicle Chassis Trainer

Model Torquemaster-08

Section Vehicle Chassis Trainer Torquemaster-08 is built with a complete functional chassis of an actual car, didactically prepared for training use. This Section Vehicle Chassis Trainer features an original driver’s seat, four steel wheels with new tires, and a rear-mounted push handle for easy maneuvering. Axle components carry full adjustment settings for lead, caster, camber, toe, spreading, wheel offset, and thrust angle. It is suited for both structural demonstration and brake system repair training.

The Section Vehicle Chassis Trainer Torquemaster-08 is built with a complete functional chassis of an actual car, didactically prepared for training use. This Section Vehicle Chassis Trainer allows the attachment of additional systems for extended demonstration.

Product Overview

The Torquemaster-08 is constructed on a grid tube frame fitted with an original driver’s seat with all available options. Holding and lashing points allow the chassis to be fixed on test benches. The chassis rolls on four steel wheels fitted with new tires, and a rear-mounted push handle makes maneuvering easier. The axle components carry all settings including lead, caster, camber, toe, spreading, wheel offset, and thrust angle. The rear axle is equipped with eccentrics and engraved timing marks. This Section Vehicle Chassis Trainer serves as a visual aid for mechanical subjects, demonstrating chassis structure and components, and can also be used for brake system repair and service training.

Section Vehicle Chassis Trainer Torquemaster-08 — Technical Specifications

Parameter Value
Model Torquemaster-08
Chassis Base Complete functional chassis of an actual car
Frame Construction Tubular steel frame, square section tube for lateral and side rails
Joints Continuously welded
Structural Support Crossbars for rigid structure
Colour Available in any colour
Operation Manual
Equipment Layout On base with wheels
Finish Fine finish
Length x Width x Height (approx.) 3200 x 1500 x 900 mm
Weight (approx.) 650 kg

Technical Data

Component Detail
Seat Original driver’s seat with all available options
Wheels Four steel wheels with new tires
Maneuvering Aid Rear-mounted push handle
Axle Settings Lead, caster, camber, toe, spreading, wheel offset, thrust angle
Rear Axle Equipped with eccentrics and engraved timing marks
Mounting Holding and lashing points for fixing on test benches

Key Features

  • Chassis Base: Made of an actual car
  • Operation: Manual
  • Layout: On base with wheels
  • Finish: Fine finish
  • Handling: Simple operations
  • Accuracy: Functional accuracy
  • Design: Section Vehicle Chassis Trainer with adjustable axle settings for lead, caster, camber, toe, spreading, wheel offset, and thrust angle

Experiments

  • Study of chassis structure and components
  • Study of axle settings: lead, caster, camber, toe, spreading, wheel offset, thrust angle
  • Brake system repair and service procedure training
  • Study of rear axle eccentrics and timing marks
  • Attachment and study of additional chassis-mounted systems

Construction and Design

The Section Vehicle Chassis Trainer Torquemaster-08 is built on a tubular steel frame using square section tube for the lateral and side rails. All joints are continuously welded, and crossbars provide a rigid structure. The chassis is mounted on a grid tube frame fitted with an original driver’s seat with all available options. It rolls on four steel wheels with new tires and includes a rear-mounted push handle for maneuvering. Holding and lashing points allow fixing on test benches. The chassis is available in any colour.

Scope of Delivery

  • Complete functional car chassis on tubular steel frame
  • Original driver’s seat with all available options
  • Four steel wheels with new tires
  • Rear-mounted push handle
  • Holding and lashing fixtures for test bench mounting

Q1: What is the Section Vehicle Chassis Trainer Torquemaster-08 built from?
A: It is built from a complete functional chassis of an actual car, didactically prepared for training.

Q2: What axle settings can be demonstrated on this trainer?
A: Lead, caster, camber, toe, spreading, wheel offset, and thrust angle can all be demonstrated.

Q3: Can this trainer be used for brake system training?
A: Yes, it can be used as educational equipment for brake system repair and service procedures.

Q4: How is the chassis mounted for testing?
A: Holding and lashing points allow the chassis to be fixed securely on test benches.

Q5: What are the dimensions and weight of the trainer?
A: The approximate dimensions are 3200 x 1500 x 900 mm, with an approximate weight of 650 kg.

Need Assistance? We're Here to Help!

Connect with our team for product specifications, pricing, and customized solutions for your institution or project.

Trade enquiries

Distributors, dealers, resellers and bulk buyers

We manufacture Section Vehicle Chassis Trainer | Torquemaster-08 at our own works in Ambala, India. Manufacturer-direct, three ways to work with us.

01

Become a distributor, dealer or agent in your territory

Already selling to colleges or hospitals in your market? Add a manufacturer-direct line. Terms reviewed on application.

or message on WhatsApp
02

Wholesale and bulk quotation

Holding a live enquiry? Send the model, quantity, destination and required Incoterm. We will confirm the supplied scope and available export documents.

or message on WhatsApp
03

OEM authorisation letter for a tender

Bidding a tender that requests a manufacturer authorisation form (MAF)? Send the tender reference, deadline and listed equipment so we can confirm what can be issued.

or message on WhatsApp

Full distributor guide OEM and export enquiries

Automobile Engineering Lab EquipmentModel Torquemaster-08
🏭
Manufacturer DirectProduct-specific enquiry, not a generic catalogue
🌍
Destination MatchedConfiguration and delivery scope reviewed together
📄
Decision-Ready ReplyApplicable documentation confirmed before ordering
Product-specific enquiry

Get a quotation your team can evaluate

A bare price can hide configuration, accessories, voltage, documentation and delivery assumptions. Send the product and destination now so the quoted scope can be reviewed before a purchase decision.

Avoid the mismatchDo not approve a generic price that leaves supplied scope unclear.
Your product is attachedNo need to retype the model or copy the page URL.
Move toward an approvable quoteAdd the destination; quantity and tender details can follow.

No account is required. Organisation, quantity and tender details are optional. Include the country code so the team can reach you internationally.

1993
Manufacturing Since
Direct
Manufacturer Supply
Quote-based
International Orders
Model
Torquemaster-08

Overview

The Section Vehicle Chassis Trainer Torquemaster-08 is built with a complete functional chassis of an actual car, didactically prepared for training use. This Section Vehicle Chassis Trainer allows the attachment of additional systems for extended demonstration.

Product Overview

The Torquemaster-08 is constructed on a grid tube frame fitted with an original driver's seat with all available options. Holding and lashing points allow the chassis to be fixed on test benches. The chassis rolls on four steel wheels fitted with new tires, and a rear-mounted push handle makes maneuvering easier. The axle components carry all settings including lead, caster, camber, toe, spreading, wheel offset, and thrust angle. The rear axle is equipped with eccentrics and engraved timing marks. This Section Vehicle Chassis Trainer serves as a visual aid for mechanical subjects, demonstrating chassis structure and components, and can also be used for brake system repair and service training.

Key Features

Key Features

  • Chassis Base: Made of an actual car
  • Operation: Manual
  • Layout: On base with wheels
  • Finish: Fine finish
  • Handling: Simple operations
  • Accuracy: Functional accuracy
  • Design: Section Vehicle Chassis Trainer with adjustable axle settings for lead, caster, camber, toe, spreading, wheel offset, and thrust angle

Experiments

  • Study of chassis structure and components
  • Study of axle settings: lead, caster, camber, toe, spreading, wheel offset, thrust angle
  • Brake system repair and service procedure training
  • Study of rear axle eccentrics and timing marks
  • Attachment and study of additional chassis-mounted systems

Construction and Design

The Section Vehicle Chassis Trainer Torquemaster-08 is built on a tubular steel frame using square section tube for the lateral and side rails. All joints are continuously welded, and crossbars provide a rigid structure. The chassis is mounted on a grid tube frame fitted with an original driver's seat with all available options. It rolls on four steel wheels with new tires and includes a rear-mounted push handle for maneuvering. Holding and lashing points allow fixing on test benches. The chassis is available in any colour.

Scope of Delivery

  • Complete functional car chassis on tubular steel frame
  • Original driver's seat with all available options
  • Four steel wheels with new tires
  • Rear-mounted push handle
  • Holding and lashing fixtures for test bench mounting

Specifications

Section Vehicle Chassis Trainer Torquemaster-08 — Technical Specifications

Parameter Value
Model Torquemaster-08
Chassis Base Complete functional chassis of an actual car
Frame Construction Tubular steel frame, square section tube for lateral and side rails
Joints Continuously welded
Structural Support Crossbars for rigid structure
Colour Available in any colour
Operation Manual
Equipment Layout On base with wheels
Finish Fine finish
Length x Width x Height (approx.) 3200 x 1500 x 900 mm
Weight (approx.) 650 kg

Technical Data

Component Detail
Seat Original driver's seat with all available options
Wheels Four steel wheels with new tires
Maneuvering Aid Rear-mounted push handle
Axle Settings Lead, caster, camber, toe, spreading, wheel offset, thrust angle
Rear Axle Equipped with eccentrics and engraved timing marks
Mounting Holding and lashing points for fixing on test benches

Buying Section Vehicle Chassis Trainer: Distributor & Tender Guidance

Section Vehicle Chassis Trainer is the product name procurement teams should use when searching, preparing a BOQ or comparing suppliers. A model reference identifies the proposed configuration; it should not replace the product name or the buyer’s required experiment. This equipment is considered for engineering laboratory teaching, demonstration and practical skill development for the applicable discipline.

What to include in the RFQ

State the product name, quantity, destination, curriculum or tender reference, and required experiment, operating range, measurement method, included accessories, utilities, documentation, quantity and delivery destination. This lets the technical team respond against the intended use rather than guess from a model code.

How distributors should quote it

Keep Section Vehicle Chassis Trainer as the BOQ line item. Add the proposed model, included accessories, documentation, packing and delivery basis as separate fields so the end buyer can verify the offer.

How to compare suppliers

Compare the offered experiment coverage, measurable parameters and supplied scope line by line before selecting an equivalent model. Record exclusions and alternatives in writing before commercial comparison.

Why Buy From Scientico

🏭

In-House Manufacturer

Designed & built in our Ambala facility since 1993 — not a reseller. Full control over quality & customisation.

✅

Configuration Review

Specifications, documentation and options are confirmed against the selected model.

🌏

International Enquiries

Share your destination and procurement requirements for an export quotation.

📦

Quote-Based Supply

Send the model, quantity and delivery location for a tailored proposal.

🛠

Support Scope

Support and warranty terms are documented in the applicable quotation.

🎓

Built for Teaching

Designed around curriculum experiments with clear, repeatable, hands-on results.

Frequently Asked Questions

Q1: What is the Section Vehicle Chassis Trainer Torquemaster-08 built from? A: It is built from a complete functional chassis of an actual car, didactically prepared for training.

Q2: What axle settings can be demonstrated on this trainer? A: Lead, caster, camber, toe, spreading, wheel offset, and thrust angle can all be demonstrated.

Q3: Can this trainer be used for brake system training? A: Yes, it can be used as educational equipment for brake system repair and service procedures.

Q4: How is the chassis mounted for testing? A: Holding and lashing points allow the chassis to be fixed securely on test benches.

Q5: What are the dimensions and weight of the trainer? A: The approximate dimensions are 3200 x 1500 x 900 mm, with an approximate weight of 650 kg.

Related Guides & Resources

In-depth guides from Scientico on Automobile Engineering lab setup, experiments and procurement.

Section Vehicle Chassis Trainer | Torquemaster-08

Related Laboratory Equipment

Explore related apparatus in this equipment range. Request a model-specific international quotation.

Section Model Two Stroke Four Stroke Petrol Engine by Scientico IndiaSection Model Two Stroke Four Stroke Petrol Engine | Torquemaster-02Steam Engine ModelSteam Engine Model | Torquemaster-36Section-Model-of-Four-Stroke-Diesel-EngineSection Model Of Four-Stroke Diesel Engine | Torquemaster-37Wankel Engine Model by Scientico IndiaWankel Engine Model | Torquemaster-09Power-Window-System-TrainerPower Window System Trainer | Torquemaster-19Working Model Of Abs Braking System by Scientico IndiaWorking Model Of Abs Braking System | Torquemaster-11Power Door Lock system trainer manufacturerPower Door Lock System Trainer | Torquemaster-35Working Model Of Clutch Type Differential by Scientico IndiaWorking Model Of Clutch Type Differential | Torquemaster-10
📄 Download Datasheet

Get the product datasheet

Share your details to open the complete datasheet, then print or save it as a PDF.

Section Vehicle Chassis Trainer | Torquemaster-08