Temperature Control Training System (Modular Type) | NexuMation 66
The Temperature Control Training System (Modular Type) NexuMation 66 is a modular trainer on a vertical two-level frame. This temperature control training system supports two-position, three-range, and PID temperature control up to 100°C. PID ranges are Kp = 0 … 1000, TI = 1ms … 100s, and TD = 0.2ms … 20s. A USB DAQ system and management software are included.
The Temperature Control Training System (Modular Type) NexuMation 66 is designed for the study of temperature control application. This temperature control training system gives students practical training through guided experiments. Industrial type components are educationally adapted using a modular panel system.
Product Overview
The Temperature Control Training System (Modular Type) NexuMation 66 has a modular structure. Educational panels are installed on a vertical frame. A theoretical and practical manual is supplied.
The modular panel system permits step-by-step assembling. Students build from the simplest circuit to the most complex system. This gives a direct and immediate approach to temperature control topics.
The temperature control training system supports two-position, three-range, and PID temperature control. It includes a computerized DAQ system via USB and management software.
emperature Control Training System (Modular Type) NexuMation 66: Technical Specifications
| Parameter | Value |
|---|---|
| Structure | Modular, educational panels on vertical frame |
| Work Frame | Two-level |
| Controllers | PID, two position, three-range |
| Power Supply | +15 V; 0 V; -15 V, 2.4 A (3 A short period) |
| PID Range | Kp = 0 … 1000, TI = 1ms … 100s, TD = 0.2ms … 20s |
| Simulated Controlled System | Kp = 0.2 … 1.5, T1 = 0.1 … 1000s, T2 = 0.1 … 1000s |
| Power Amplifier | 30 W max., short-circuit protected |
| Temperature Control System | Max. 100°C, feedback 2 mA/10°C or 1 V/10°C |
| Data Acquisition | Computerized DAQ system via USB |
| Software | Management software |
| Documentation | Theoretical and practical manual |
Technical Data
| Module | Specification |
|---|---|
| DC Power Supply | +15 V; 0 V; -15 V. 2.4 A (3 A short period). Single-phase mains. Two LEDs for nominal voltage. Mains switch with pilot lamp |
| Voltage Reference Generator | +15 V; 0 V; -15 V. Continuous and step reference signal: -10 V to +10 V, 0 to +10 V. Switch: internal/external reference. Switch: 0/±10 V or 0/+10 V range |
| PID Controller | +15 V; 0 V; -15 V. Signal range -10V … +10V. Kp = 0 … 1000. TI = 1ms … 100s. TD = 0.2ms … 20s. Continuously adjustable, coarse/fine adjustment. Reset input, Input IOff. Output summing node for noise variables. Error signal measurement terminal. Output offset adjustment. Three LED deviation indicators. Over-range LED above 10 V or below -10 V |
| Summing Point 5 Inputs | +15 V; 0 V; -15 V. Signal range -10V … +10V. Gain factor 1. LED indicator of over-range |
| Simulated Controlled System | +15 V; 0 V; -15 V. Input summing point for controlling variable (y) and noise variable (z). Signal range -10V … +10V. Kp = 0.2 (attenuation) … 1.5 (amplification). T1 = 0.1 … 1000s. T2 = 0.1 … 1000s. Reset input for initial conditions. Coarse rotary switches, potentiometer fine setting. LED indicators of over-range |
| Manual / Automatic Switch | +15 V; 0 V; -15 V. Signal range -10V … +10V. Manual/Automatic mode switch. Manual mode potentiometer. Output summing point |
| Two Position Controller | +15 V; 0 V; -15 V. Input summing point. Signal range -10V … +10V. Output voltages 0/+5 V; 0/+10 V. Adjustable hysteresis 0 … ±2.5 V |
| Power Amplifier | +15 V; 0 V; -15 V. Signal range -10V … +10V. Output voltage -10 V … +10 V to ground; 0 … ±20 V symmetrically. Max. output power 30 W, short-circuit protected |
| Temperature Control System | +15 V; 0 V; -15 V. Max. temperature 100°C. Bimetallic safety switch intervention 90 … 100°C. Feedback signal 2 mA/10°C or 1 V/10°C. Apparent dead time TU about 10s. Compensation time TG about 120s |
| Single Pole Pushbutton | Plug-in element, switch load 2 A, 250 V |
| Single Pole Switch | Plug-in element, normally open, switch load 2 A, 250V |
Key Features
- Structure: modular panels on vertical frame
- Application: temperature control training system for guided experiments
- Work Frame: two-level
- Controllers: PID, two position, three-range
- PID Parameters: Kp = 0 … 1000, TI = 1ms … 100s, TD = 0.2ms … 20s
- Power Supply: +15 V; 0 V; -15 V, 2.4 A
- Power Amplifier: 30 W max., short-circuit protected
- Temperature Process: max. 100°C, feedback 2 mA/10°C or 1 V/10°C
- Data Acquisition: computerized DAQ system via USB
- Software: management software included
Experiments
- The two-position controller in the temperature process
- The two-position controller with delayed feedback in the temperature process
- The two-position controller with elastic feedback in the temperature process
- The three-range controller in the temperature process
- P, PI and PID controls of the temperature process using the CHR method
Construction and Design
The Temperature Control Training System (Modular Type) NexuMation 66 is built on a vertical frame. Educational panels are installed in a modular arrangement. A two-level work frame organizes the components.
Industrial type components are educationally adapted. The modular panel system permits step-by-step assembly. Students progress from the simplest circuit to the most complex system.
The temperature control training system includes a temperature control system module with a max. temperature of 100°C and a bimetallic safety switch. A simulated controlled system, controller, and switch modules plug into the frame. A connecting leads set is supplied for interconnection.
A computerized DAQ system connects via USB. Management software runs the experiments.
Software
- Computerized DAQ system via USB
- Management software
Scope of Delivery
- DC Power Supply
- Voltage Reference Generator
- PID Controller
- Summing Point 5 Inputs
- Simulated Controlled System
- Manual / Automatic Switch
- Two Position Controller
- Power Amplifier
- Temperature Control System
- Single Pole Pushbutton
- Single Pole Switch
- Computerized DAQ system via USB
- Management software
- Connecting Leads Set
- Two-level work frame
- Theoretical and practical manual
Q1. What is the Temperature Control Training System (Modular Type) NexuMation 66 designed for?
It is designed for the study of temperature control application through guided experiments.
Q2. Which controllers are included in this temperature control training system?
Two-position, three-range, and PID controllers.
Q3. What are the PID controller ranges?
Kp = 0 … 1000, TI = 1ms … 100s, and TD = 0.2ms … 20s.
Q4. What is the max. temperature of the temperature control system?
100°C, with a bimetallic safety switch intervening at 90 … 100°C.
Q5. How does the temperature control training system connect to a computer?
A computerized DAQ system via USB is included, with management software.
Need Assistance? We're Here to Help!
Connect with our team for product specifications, pricing, and customized solutions for your institution or project.
