The Bernoulli’s Principle Module | FluidoSurge-X 358 by SCIENTICO is a Venturi-based laboratory accessory for demonstrating the continuity equation and Bernoulli’s principle. It enables measurement of static, total, and dynamic pressures using a Pitot-static tube and manometer system. Designed for use with the Aerodynamics Trainer FluidoSurge-X 348.
Hydraulic Bench Apparatus with Flowmeter | FluidoSurgeX 105
The SCIENTICO FluidoSurgeX 105 Hydraulic Bench Apparatus with Flowmeter is designed for fundamental fluid mechanics experiments.
It operates on a closed water circuit with a centrifugal pump and stepped measuring tank.
Integrated flowmeters provide direct flow measurement, supported by manual volumetric methods.
An integrated flume and GRP construction make it suitable for routine laboratory teaching and experimentation.
The Hydraulic Bench Apparatus with Flowmeter FluidoSurgeX 105 by SCIENTICO is designed for fundamental fluid mechanics laboratory experiments.
It provides a closed water circuit for supplying experimental units and measuring volumetric flow rates.
The system combines stepped volumetric measurement with direct flow indication using flowmeters.
It is suitable for structured teaching and routine laboratory experimentation.
Product Overview
The SCIENTICO FluidoSurgeX 105 Hydraulic Bench Apparatus serves as a base module for a wide range of fluid mechanics experiments.
The apparatus operates on a closed water circuit comprising a storage tank, centrifugal pump, and an elevated stepped measuring tank.
Volumetric flow rates can be determined using integrated flowmeters for small and large flow ranges, as well as by manual stopwatch based volumetric measurement.
The top work surface allows safe positioning of experimental units and includes an integrated flume for conducting weir experiments.
| Parameter | Specification |
|---|---|
| Model | FluidoSurgeX 105 |
| Type | Hydraulic Bench Apparatus with Flowmeter |
| Application | Fluid Mechanics Laboratory |
| Water Circuit | Closed-loop system |
| Pump Type | Centrifugal |
| Pump Power Consumption | 500 to 746 W |
| Maximum Flow Rate | Up to 100 L/min |
| Maximum Head | 21.5 m |
| Storage Tank Capacity | 160 L |
| Measuring Tank Capacity (Large Flow) | 40 L |
| Measuring Tank Capacity (Small Flow) | 7 L |
| Flow Measurement | Flowmeters and volumetric method |
| Measuring Beaker Capacity | 5 L |
| Stopwatch Range | 0 to 9 h 59 min 59 sec |
| Work Surface | Integrated flume with safety edge |
| Flume Size (L x W x H) | 510 x 165 x 170 mm |
| Construction Material | GRP |
Key Features –
-
Hydraulic bench with integrated flowmeters for direct flow measurement
-
Closed water circulation system for clean and efficient operation
-
Dual section measuring tank for small and large volumetric flow rates
-
Manual volumetric flow measurement using stopwatch
-
Integrated flume for weir and open channel flow experiments
-
GRP construction for corrosion resistance and long service life
Applications –
-
Fundamental fluid mechanics laboratory experiments
-
Volumetric and flowmeter based flow rate measurement studies
-
Weir and open channel flow experiments
-
Engineering colleges and technical institutes
-
Teaching and demonstration of hydraulic principles
Construction & Design Details –
The FluidoSurgeX 105 features GRP construction for the storage tank, measuring tank, and work surface, ensuring durability and resistance to water exposure.
The stepped measuring tank design allows accurate volumetric measurement across different flow ranges.
Flowmeters are integrated into the system to provide direct indication of volumetric flow rates during experiments.
The work surface includes an internal edge for safe placement of accessories and controlled collection of return water.
Export & Supply Capability –
SCIENTICO manufactures the FluidoSurgeX 105 Hydraulic Bench Apparatus for domestic and international supply.
The equipment is suitable for export to engineering colleges, universities, and laboratory training centers.
Standard packing, instruction manuals, and essential accessories are provided with each unit.
Q1. What is the advantage of having flowmeters on this hydraulic bench?
Flowmeters provide direct indication of volumetric flow rates without relying only on manual measurement.
Q2. Can flow rate also be measured manually on this system?
Yes, volumetric flow rates can be measured using the stepped measuring tank, measuring beaker, and stopwatch.
Q3. Is the hydraulic bench dependent on an external water supply?
No, it operates on a closed water circuit with an integrated storage tank and pump.
Q4. What experiments can be performed using the integrated flume?
The flume is used for weir and open channel flow experiments.
Q5. What items are included in the standard scope of delivery?
The supply includes one base hydraulic bench module, one stopwatch, one measuring beaker, and one instruction manual.
You may also like
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
The Flow in a Pipe Bend Module | FluidoSurge-X 362 by SCIENTICO is an experimental accessory for studying static pressure distribution in a 90° elbow duct. It features 29 pressure tapping points and transparent construction for detailed analysis. Designed for use with the Aerodynamics Trainer FluidoSurge-X 348 in fluid mechanics laboratories.
The Boundary Layers Module | FluidoSurge-X 356 by SCIENTICO is an experimental accessory for studying boundary layer formation over a flat plate. It includes smooth and rough surface plates, an adjustable Pitot tube, and removable side bodies for pressure gradient analysis. Designed for use with a compatible aerodynamics trainer in fluid mechanics laboratories.
The Drag Forces Module | FluidoSurge-X 352 by SCIENTICO is an experimental accessory for measuring drag forces and determining drag coefficients on plates, cylinders, and aerofoils. It includes a beam scale and adjustable Pitot tube for pressure and wake analysis. Designed for use with the compatible aerodynamics trainer in fluid mechanics laboratories.
The Aerodynamics Trainer | FluidoSurge-X 348 by SCIENTICO is a laboratory system for studying airflow around and through bodies. It features a variable-speed radial fan, low-turbulence measuring section, and 16 inclined tube manometers for pressure analysis. Suitable for aerodynamics and fluid mechanics laboratory experiments.
The Groundwater Flow Apparatus | FluidoSurge-X 310 by SCIENTICO is a laboratory system for three-dimensional study of groundwater flow, hydraulic gradients, and cone of depression. It features a sand-filled tank, dual wells, and 19 tube manometers for accurate measurement. Suitable for hydrology, geotechnical, and civil engineering laboratory applications.
The Demonstration Lysimeter | FluidoSurgeX – 306 by SCIENTICO is a laboratory apparatus for studying soil-water balance and evapotranspiration. It features a hydraulic sensing system with an inclined-tube manometer for accurate measurement of water gains and losses. Suitable for hydrology, environmental engineering, and agricultural laboratory applications.
The Multi Pump Test Rig with 4 Pumps | FluidoSurge-X 345 by SCIENTICO is a fully instrumented laboratory system for studying centrifugal, side channel, and plunger pump performance. It supports series and parallel pump configurations and enables measurement of flow, pressure, torque, speed, and efficiency. The PLC-controlled closed-loop system is suitable for advanced fluid mechanics and hydraulic machinery laboratories.
The Advance Multi Pump Test Rig | FluidoSurge-X 342 by SCIENTICO is a fully instrumented laboratory system for studying the performance of multiple pump types. It enables direct measurement of pressure, flow, torque, and speed, with variable speed control and closed-loop water circulation. The rig supports advanced pump characteristic, efficiency, and similarity studies in fluid mechanics laboratories.
The Rainfall Hydrographs Apparatus | FluidoSurge-X 302 by SCIENTICO is a laboratory system for studying rainfall–runoff behavior and flood hydrograph formation. It simulates controlled rainfall over a gravel catchment and measures runoff using a time-based collection system. The apparatus provides an immediate visual representation of hydrographs. Suitable for hydrology and civil engineering teaching laboratories.
The Visualization of Flow Fields | FluidoSurge-X 298 by SCIENTICO is a laboratory apparatus for qualitative study of laminar and turbulent flow using hydrogen bubble visualization. It features a shallow water channel, adjustable bubble generation, and interchangeable models for observing streamlines, flow separation, and vortices. The system enables clear, low-velocity flow visualization for fluid mechanics teaching laboratories.
The Multi Pump Test Rig Apparatus | FluidoSurge-X 294 by SCIENTICO is a self-contained laboratory system for studying centrifugal, reciprocating, and axial flow pumps. It enables measurement of pump characteristics, efficiency, and operating behavior using variable speed control and integrated instrumentation. Transparent pump construction supports clear visualization of internal flow. Suitable for fluid mechanics and hydraulic machinery teaching laboratories.
The Pipes Losses Apparatus | FluidoSurge-X 341 by SCIENTICO is a laboratory system for studying frictional pressure losses in straight pipes. It features four pipe sections of different materials and diameters with accurate differential pressure measurement. The unit supports experiments on flow velocity, surface roughness, and theoretical comparison. Suitable for fluid mechanics and hydraulics teaching laboratories.
The Visualization of Seepage Flows | FluidoSurge-X 328 by SCIENTICO is a laboratory apparatus for studying seepage and groundwater flow through permeable media. It enables visualization of streamlines and flow nets using a contrast medium and supports pressure distribution studies on hydraulic structures. The closed water circuit and transparent construction allow clear and repeatable experiments. Suitable for civil engineering and fluid mechanics teaching laboratories.
The Multi Turbine Test Rig | FluidoSurge-X 314 by SCIENTICO is a self-contained laboratory system for studying Pelton, Francis, and Kaplan turbines. It enables measurement of power output, efficiency, and specific speed using a variable-speed pump and integrated dynamometer. The closed water circuit and interchangeable turbine modules support comprehensive hydraulic turbine experiments. Suitable for fluid mechanics and hydraulic machinery teaching laboratories.
The Permeability / Fluidization Studies Apparatus | FluidoSurge-X 282 by SCIENTICO is a laboratory system for studying flow through granular beds and liquid fluidization behavior. It supports experiments on permeability, pressure drop, and packed bed correlations using transparent test sections and differential manometers. The unit operates without electrical power and allows clear visual observation. Suitable for fluid mechanics and process engineering teaching laboratories.
The Advanced Hydrological Investigations Apparatus | FluidoSurge-X 278 by SCIENTICO is a laboratory system for studying seepage, groundwater flow, precipitation runoff, and sediment transport. It features an inclinable sand-filled tank, rainfall simulation with timer control, and obstacle models for river flow studies. The closed water circuit supports controlled hydrological experiments. Suitable for advanced civil engineering and water resources laboratories.
The Basic Hydrology Apparatus | FluidoSurge-X 274 by SCIENTICO is a laboratory system for studying seepage, groundwater flow, and precipitation runoff in soil. It features an inclinable sand-filled tank, rainfall simulation, and multiple groundwater measurement points. The closed water circuit supports controlled hydrological experiments. Suitable for civil engineering and water resources teaching laboratories.
The Rotating Tank Vortex Apparatus | FluidoSurge-X 270 by SCIENTICO is a laboratory unit for studying free and forced vortex motion in rotating fluids. It features a transparent rotating vessel, variable speed control, and precision measurement using a traverse probe. The apparatus supports surface profile and total head studies. Suitable for fluid mechanics teaching and demonstration laboratories.
The Open-Channel Sediment Transport Apparatus | FluidoSurge-X 265 by SCIENTICO is a laboratory flume for studying bed-load transport and open-channel flow behavior. It features an adjustable slope, tempered glass side walls, and a closed water circuit with sediment trap. The system supports experiments on sediment transport, scour, and flow regimes under controlled conditions. Suitable for fluid mechanics and hydraulic engineering teaching laboratories.
The Reciprocating Pump Demonstration Unit | FluidoSurge-X 264 by SCIENTICO is a laboratory apparatus for studying reciprocating pump performance and pressure behavior. It enables measurement of pump characteristic curves, delivery pressure, and cylinder pressure. The unit includes provisions for pulsation damping and volumetric flow measurement. Suitable for fluid mechanics and hydraulic machinery teaching laboratories.
The Orifice Flowmeter | FluidoSurge-X 232 by SCIENTICO is a laboratory apparatus for studying flow measurement using the differential pressure method. It features a transparent acrylic pipe section with an orifice plate and manometer connections for pressure loss measurement. The unit supports experiments on Bernoulli’s principle and continuity law. Suitable for fluid mechanics and hydraulics teaching laboratories.
The Centrifugal Compressor Apparatus | FluidoSurge-X 260 by SCIENTICO is a laboratory system for studying centrifugal compressor performance and operating characteristics. It features a multi-stage compressor with variable speed control, transparent intake, and integrated measurement of pressure, temperature, speed, and power. The apparatus supports characteristic curve and efficiency experiments. Suitable for fluid mechanics and turbomachinery teaching laboratories.
The Radial Fan Flow Apparatus | FluidoSurge-X 252 by SCIENTICO is a laboratory system for studying radial fan performance and airflow characteristics. It features adjustable fan speed, transparent ducting, and interchangeable impellers for comparative analysis. The apparatus supports measurement of pressure, flow rate, speed, and temperature. Suitable for fluid mechanics and thermal engineering teaching laboratories.
The Fundamentals of Sedimentation | FluidoSurge-X 244 by SCIENTICO is a laboratory apparatus for studying solid-liquid separation through sedimentation. It features five transparent, backlit tanks for comparing settling velocities in different suspensions. The system supports experiments on particle density, concentration, and fluid properties. Suitable for fluid mechanics and environmental engineering teaching laboratories.
The Water Hammer Apparatus | FluidoSurge-X 250 by SCIENTICO is a laboratory unit for demonstrating and studying the water hammer phenomenon in pipelines. It allows visualization of pressure surges using transparent piping and controlled flow interruption. The apparatus includes surge pipes of different diameters to study mitigation effects. Suitable for fluid mechanics and hydraulic engineering teaching laboratories.
The Permeability and Fluidization Studies Apparatus (HydraNexis HNX 12) by SCIENTICO is a non-electrical, laboratory-scale system for studying permeability, pressure drop, and fluidization in granular beds. With a transparent test section, constant head supply, and differential pressure measurement, it is ideal for educational and research applications in water treatment and environmental engineering.
The Pipe Surge and Water Hammer Apparatus | FluidoSurge-X 324 by SCIENTICO is a laboratory system for studying transient flow effects in pipelines. It enables investigation of pipe surge and water hammer using stainless steel test pipes, surge tank, and pressure transducers. The system includes an oscilloscope for observing pressure waves and operates with a constant head water supply. Suitable for fluid mechanics and hydraulic engineering laboratories.
The Sedimentation Tank (HydraNexis HNX 11) by SCIENTICO is a laboratory-scale pilot unit for studying sedimentation, hydraulic flow behavior, and solid–liquid separation. With controlled slurry preparation, tracer injection, and precise flow regulation, it is ideal for teaching, research, and water treatment process development.
The Multi-Purpose Teaching Flume (Length 10 m) | FluidoSurge-X 248 by SCIENTICO is a large-scale open channel laboratory flume for hydraulic engineering education and research. It features a tempered glass experimental section, adjustable slope, and closed water circuit. The system supports a wide range of experiments using standard and optional hydraulic models. Suitable for advanced teaching, demonstration, and fluid mechanics research laboratories.
The Flocculation Test Unit (HydraNexis HNX 10) by SCIENTICO is a six-station jar test system for determining optimum coagulation and flocculation conditions. With independent variable-speed stirrers, digital control, and flexible operation, it is ideal for laboratory studies, plant optimization, and educational training in water treatment technology.
The Multi-Purpose Teaching Flume (Length 5 m) | FluidoSurge-X 240 by SCIENTICO is a large-scale open channel laboratory flume for hydraulic engineering education. It features a tempered glass experimental section, adjustable slope, and closed water circuit. The system supports a wide range of experiments using standard and optional hydraulic models. Suitable for teaching, demonstration, and advanced fluid mechanics research.
The Multi-Purpose Teaching Flume (Length 2.5 m) | FluidoSurge-X 236 by SCIENTICO is an open channel laboratory flume for hydraulic engineering education. It features a tempered glass experimental section, adjustable slope, and closed water circuit. The system supports a wide range of experiments using standard and optional hydraulic models. Suitable for teaching, demonstration, and experimental analysis in fluid mechanics and hydraulics laboratories.
The Pipe Network Apparatus | FluidoSurge-X 228 by SCIENTICO is a modular laboratory system for studying flow behavior in interconnected pipe networks. It supports experiments on head loss, discharge, and flow distribution in series, parallel, and mixed configurations. The apparatus features tool-free reconfiguration, individual flow control, and pressure measurement points. Suitable for fluid mechanics and hydraulics laboratories.
The Horizontal Osborne Reynolds Demonstrator | FluidoSurge-X 224 by SCIENTICO is a laboratory apparatus for visualizing flow regimes in pipe flow. It enables observation of laminar, transitional, and turbulent flow using controlled ink injection in a horizontal plexiglass tube. The unit supports determination of the critical Reynolds number under constant head conditions. Suitable for fluid mechanics teaching laboratories.
The Flow Visualization in Channel | FluidoSurgeX 220 by SCIENTICO is an open channel flow apparatus for fluid mechanics laboratories. It enables visualization of streamlines, vortices, and flow behavior around weirs and drag bodies using a transparent flume and contrast medium injection. The unit supports adjustable water levels and uniform inlet flow. Suitable for use with a hydraulic bench or laboratory water supply.
The Kaplan Turbine Apparatus | FluidoSurgeX 208 by SCIENTICO is a laboratory training unit for studying reaction turbine performance. It enables investigation of power output, head, and efficiency under varying flow and guide vane positions. The system operates with a hydraulic bench and features band brake loading and non-contact speed measurement. Suitable for fluid mechanics and hydraulic machinery laboratories.
The Mini Wind Tunnel | FluidoSurgeX 219 by SCIENTICO is an Eiffel type subsonic wind tunnel for aerodynamics and fluid mechanics laboratories. It enables measurement of lift, drag, velocity, and angle of attack on stationary models. The system features a transparent measuring section, low-turbulence airflow, and electronic force measurement. Optional DAQ hardware and software support digital data acquisition and reporting. Suitable for academic teaching and laboratory experimentation.
The Flight Demonstration Wind Tunnel FluidoSurge-X 218 is designed for hands on study of fixed wing aircraft behavior. It enables demonstration of take off, flight, stall, and landing characteristics. The setup includes manual flight controls, digital displays, and a transparent working section. It is suitable for aerodynamics and fluid mechanics laboratory teaching.
The Wind Tunnel FluidoSurge-X 216 is an Eiffel type subsonic wind tunnel for aerodynamic experiments. It enables measurement of lift, drag, velocity, and pressure distribution on models. The setup includes a transparent measuring section, force sensor, and multi tube manometer. It is suitable for aerodynamics and fluid mechanics laboratory teaching.
The Hydrostatics Trainer FluidoSurge-X 213 is designed for experimental study of fluids at rest and hydrostatic pressure effects. It supports experiments on buoyancy, density, surface tension, and center of pressure. The setup includes integrated water and air supply with transparent experimental units. It is suitable for comprehensive hydrostatics laboratory teaching.
The Fluid Properties & Hydrostatics Bench FluidoSurge-X 212 is a self contained laboratory bench for studying fluid properties and hydrostatics. It supports experiments on density, viscosity, pressure, buoyancy, and surface phenomena. The setup includes integrated instruments and dedicated hydrostatics modules. It is suitable for comprehensive fluid mechanics laboratory teaching.
The Advance Fluid Friction Apparatus FluidoSurge-X 205 is designed for advanced study of friction losses in pipe flow systems. It supports investigation of laminar, transitional, and turbulent flow regimes using smooth and rough pipes. The setup includes fittings, valves, and flow measuring devices with digital measurement capability. It is suitable for advanced fluid mechanics laboratory teaching and analysis.
The Depth Filtration Unit (HydraNexis HNX 09) by SCIENTICO is a laboratory-scale pilot plant for demonstrating depth filtration, pressure loss development, and backwashing. With multi-point pressure measurement and Micheau diagram plotting, it is ideal for education, training, and research in water treatment technology.
The Ion Exchange Pilot Plant (HydraNexis HNX 08) by SCIENTICO is a laboratory-scale system for demonstrating water softening and desalination using cation and anion exchangers. With continuous conductivity monitoring and full regeneration capability, it is ideal for education, research, and training in water treatment technology.
The Water Treatment Pilot Plant (HydraNexis HNX 07) by SCIENTICO is a modular laboratory-scale system demonstrating depth filtration, adsorption, and ion exchange processes. It enables hands-on study of conventional water treatment operations with full PLC control and real-time monitoring. Designed for education and research, the system supports comprehensive experimentation and data analysis in water treatment technology.
The Fluid Friction Apparatus FluidoSurge-X 204 is designed for experimental study of friction losses in pipe flow systems. It enables investigation of laminar, transitional, and turbulent flow regimes using smooth and rough pipes. The setup includes fittings, valves, and flow measuring devices for comprehensive analysis. It is suitable for advanced fluid mechanics laboratory teaching.
The Flow Visualization Apparatus FluidoSurge-X 200 is designed to demonstrate two dimensional potential flow using a Hele Shaw cell. It enables visualization of streamlines, sources, sinks, and flow around bodies with ink contrast. The setup supports modelling of Rankine half bodies and dipoles. It is suitable for fluid mechanics laboratory teaching and demonstrations.
The Aerobic Water Treatment Pilot Plant (HydraNexis HNX 06) by SCIENTICO is a laboratory-scale system demonstrating the activated sludge process for aerobic wastewater treatment. It enables controlled study of biological oxidation, aeration, and sludge settling. Designed for engineering education and research, the system supports monitoring of key biological and operational parameters. Manufactured for reliable operation, it is suitable for domestic and international supply.
The Reverse Osmosis Pilot Plant (HydraNexis HNX 05) by SCIENTICO is a laboratory-scale water purification system demonstrating membrane-based desalination. It enables controlled study of reverse osmosis principles, membrane performance, and salt separation using conductivity analysis. Designed for engineering education and research, the system supports process optimization under variable pressure and flow conditions. Manufactured for reliable operation, it is suitable for domestic and international supply.
The Anaerobic Water Treatment Pilot Plant (HydraNexis HNX 04) by SCIENTICO is a laboratory-scale system for studying anaerobic digestion and UASB reactor performance. It enables controlled evaluation of organic matter degradation, biogas generation, and biological treatment efficiency. Designed for engineering education and research, the system supports monitoring of key biological and process parameters. Built for reliable operation, it is suitable for domestic and international supply.
The Filter Press and Micro Filter Pilot Plant (HydraNexis HNX 03) by SCIENTICO is a laboratory-scale filtration system demonstrating cake filtration and tangential microfiltration. It enables detailed study of solid-liquid separation, filter cake formation, and filtration dynamics. Designed for engineering education and research, the system supports controlled experiments with real-time monitoring. Built for reliable laboratory operation, it is suitable for domestic and international supply.
The Automated Filtration Pilot Plant (HydraNexis HNX 02) by SCIENTICO is a laboratory-scale water treatment system demonstrating sand filtration and activated carbon adsorption. It enables controlled study of mechanical and chemical filtration processes with automated monitoring. Designed for engineering education and research, the system supports adsorption, turbidity, and flow analysis. Built for reliable operation, it is suitable for domestic and international supply.
The Coagulation, Flocculation and Settling Pilot Plant (HydraNexis HNX 01) by SCIENTICO is a laboratory-scale water treatment system for studying chemical precipitation and sedimentation processes. It enables clear visualization and analysis of coagulation, flocculation, and settling behavior. Designed for engineering education, research, and pilot studies, the system supports process optimization and controlled experimentation. Manufactured for reliable operation and international supply, it is suitable for academic and environmental engineering applications worldwide.
The Axial Fan Compressor Demonstration Unit FluidoSurge-X 196 is designed for studying axial fan and compressor characteristics. It enables measurement of flow rate, differential pressure, speed, and temperature under controlled conditions. The setup features variable speed control, transparent flow sections, and integrated sensors. It is suitable for fluid mechanics and turbomachinery laboratory teaching.
The Series and Parallel Pump Apparatus FluidoSurge-X 192 is designed for studying centrifugal pump performance under different configurations. It supports single, series, and parallel pump operation with variable speed control. The setup enables analysis of head, discharge, and efficiency characteristics. It is suitable for fluid mechanics and hydraulic machinery laboratory teaching.
The Centrifugal Pump FluidoSurge-X 188 is designed for experimental study of centrifugal pump performance. It enables measurement of flow rate, pressure, and speed under variable operating conditions. The setup supports characteristic curve plotting and efficiency evaluation. It is suitable for fluid mechanics and hydraulic machinery laboratory teaching.
The Cavitations Apparatus FluidoSurge-X 184 is designed to demonstrate cavitation in flowing liquids using a transparent Venturi section. It allows visualization of vapor bubble formation and collapse under controlled pressure conditions. The setup includes pressure and vacuum gauges for detailed analysis. It is suitable for fluid mechanics laboratory teaching and experimental study of cavitation phenomena.
The Drag Coefficients Apparatus | FluidoSurge-X 180 by SCIENTICO is a laboratory system for studying particle settling velocity and drag behavior in fluids. It enables experimental determination of drag coefficients and Reynolds number relationships using transparent vertical tubes. The apparatus supports controlled experiments with particles of different sizes and materials. Suitable for fluid mechanics teaching and laboratory analysis.
The Advance Dead Weight Apparatus FluidoSurge-X 173 is designed for high accuracy pressure calibration in laboratories. It uses a precision piston manometer with calibrated dead weights to generate known pressures. The setup supports calibration of Bourdon tube pressure gauges and systematic error analysis. It is suitable for advanced fluid mechanics and instrumentation laboratory experiments.
The Dead Weight Apparatus FluidoSurge-X 172 is designed for calibration of pressure gauges in laboratory environments. It generates accurate pressure using a precision piston and calibrated dead weights. The setup enables comparison between applied pressure and Bourdon gauge readings. It is suitable for fluid mechanics and instrumentation laboratory experiments.
The Pipe Friction Apparatus FluidoSurge-X 168 is designed for studying friction losses in pipe flow. It supports experiments under laminar and turbulent conditions using controlled water supply. The setup includes an elevated head tank, test pipe, and manometers for head loss measurement. It is suitable for fluid mechanics laboratory teaching and experimental analysis.
The Hydraulic Ram Pump Apparatus FluidoSurge-X 164 is designed to demonstrate water hammer and hydraulic ram pumping principles. It operates without external power and uses pressure surges to lift water to a higher level. The setup features transparent tanks, adjustable valves, and a visible air vessel for clear observation. It is suitable for fluid mechanics and hydraulic machinery laboratory experiments.
The Francis Turbine Apparatus FluidoSurge-X 160 is designed for studying reaction turbine principles in fluid mechanics laboratories. It enables measurement of torque, power output, and efficiency of a Francis turbine. The setup features adjustable guide vanes, a band brake loading system, and transparent casing.It operates with a hydraulic bench or laboratory water supply and supports characteristic curve analysis.
The Pelton Turbine Apparatus FluidoSurge-X 156 is designed for studying impulse turbine performance in fluid mechanics laboratories. It features a transparent housing with adjustable spear valve and miniature Pelton wheel. The setup enables measurement of speed, torque, power, and efficiency under constant head conditions. It operates with a hydraulic bench or laboratory water supply and supports comprehensive turbine experiments.
The Energy Losses in Pipe Apparatus FluidoSurge-X 148 is designed for studying friction and local losses in pipe flow. It enables measurement of pressure losses for laminar and turbulent conditions. The setup includes multiple pipe fittings and a manometer bank for detailed analysis. It operates with a hydraulic bench or laboratory water supply and is suitable for fluid mechanics laboratories.
The Inclined Pitot Tube Apparatus FluidoSurge-X 152 is designed for precise velocity and pressure measurement in fluid mechanics laboratories. It uses an inclined manometer for enhanced sensitivity at low pressure differences. The setup supports static and dynamic pressure measurement and velocity profile studies. It is compatible with hydraulic benches and standard laboratory water supplies.
The Pitot Tube FluidoSurge-X 144 is designed for velocity and pressure measurement in fluid mechanics laboratories. It enables determination of static and dynamic pressure using a Pitot static tube and manometer. The setup supports velocity profile studies in pipe flow with a transparent acrylic section. It is compatible with hydraulic benches and standard laboratory water supplies.
The Free and Forced Vortex Apparatus FluidoSurge-X 140 is designed for studying vortex motion in fluid mechanics laboratories. It enables generation and measurement of both free and forced vortices using a transparent acrylic vessel. The setup supports surface profile plotting and velocity measurement with interchangeable orifices and a Pitot tube. It is suitable for academic experiments and verification of vortex flow theory.
The Flowmeter Measurement Apparatus FluidoSurge-X 136 is designed for comparative study of flow measurement techniques. It integrates a Venturi meter, orifice meter, and rotameter in one laboratory setup. The system allows comparison of flow readings and pressure drops for incompressible fluids. It operates with a hydraulic bench or laboratory water supply and is suitable for fluid mechanics teaching laboratories.
The Osborne Reynold’s Apparatus with Manometer FluidoSurge-X 133 is designed for studying flow regimes in fluid mechanics laboratories. It enables visualization of laminar, transitional, and turbulent flow using dye injection. The system includes U tube and inverted U tube manometers for pressure measurement. It supports Reynolds number determination through volumetric flow analysis and controlled experimentation.
The Osborne Reynold’s Apparatus FluidoSurge-X 132 is designed to visualize flow regimes in fluid mechanics laboratories. It enables observation of laminar, transitional, and turbulent flow using dye injection. The setup supports Reynolds number determination through volumetric flow measurement. It is suitable for engineering education and demonstration of classical flow behavior.
The Orifice Discharge Apparatus FluidoSurge-X 128 is designed for studying discharge characteristics through orifices. It features a transparent Plexiglass tank with adjustable overflow and interchangeable nozzles. The setup enables measurement of jet velocity, diameter, and flow rate using standard instruments. It is suitable for fluid mechanics laboratory teaching and experimental analysis.
The Bernoulli’s Theorem Apparatus FluidoSurge-X 120 is designed for studying pressure and energy variation in flowing fluids. It uses a transparent Venturi with multiple pressure tapping points and a manometer bank. The setup supports converging and diverging flow experiments and discharge coefficient determination. It is suitable for fluid mechanics laboratory teaching and experimental verification of Bernoulli’s principle.
The Impact of Jet Apparatus FluidoSurge-X 124 is designed for studying jet impact forces in fluid mechanics laboratories. It enables direct measurement of force due to change in momentum of a water jet. The unit includes four interchangeable deflectors with different deflection angles. It operates with a hydraulic bench or standard laboratory water supply for flexible installation.
The FluidoSurge-X 116 Orifice Discharge and Free Jet Flow Apparatus is designed for experimental study of jet flow and discharge through orifices. It features a constant head Plexiglas cylinder with interchangeable nozzles. The setup enables measurement of jet velocity, diameter, and trajectory using standard laboratory instruments. It is suitable for fluid mechanics teaching and verification of theoretical flow principles.
The FluidoSurgeX 112 Hydrostatic Pressure Apparatus is designed for studying hydrostatic thrust on submerged plane surfaces. It allows measurement of force and moment for vertical and inclined planes. The setup uses a transparent quadrant tank with lever arm and calibrated weights. It supports accurate comparison between experimental results and theoretical hydrostatic analysis.
The FluidoSurgeX 108 Metacentric Height Apparatus is designed for studying the stability of floating bodies in fluid mechanics laboratories. It allows determination of metacentric height by varying the center of gravity of a floating pontoon. The setup includes a water tank, adjustable sail weight, plumb bob, and tilt indicator. It is suitable for marine engineering and buoyancy related laboratory experiments.
The FluidoSurgeX 107 Flow Over Weirs Apparatus with Weir Tank is designed for open channel flow experiments in fluid mechanics laboratories. It allows investigation of discharge characteristics over rectangular and V notch weirs. The system includes a corrosion resistant weir tank, stainless steel weir plates, and an adjustable depth gauge. It can be operated using a hydraulic bench or a standard laboratory water supply for flexible installation.
The FluidoSurgeX 104 Flow Over Weirs apparatus is designed for open channel flow experiments in fluid mechanics laboratories. It is used with a hydraulic bench to study flow over V notch and rectangular weirs. The unit includes stainless steel weir plates and a level gauge for head measurement. It supports accurate determination of flow rate and discharge characteristics during laboratory experiments.
The SCIENTICO FluidoSurgeX 105 Hydraulic Bench Apparatus with Flowmeter is designed for fundamental fluid mechanics experiments.
It operates on a closed water circuit with a centrifugal pump and stepped measuring tank.
Integrated flowmeters provide direct flow measurement, supported by manual volumetric methods.
An integrated flume and GRP construction make it suitable for routine laboratory teaching and experimentation.
The SCIENTICO FluidoSurgeX 104 Hydraulic Bench is designed for studying centrifugal pump performance in fluid mechanics laboratories.
It features two centrifugal pumps configurable in single, series, or parallel operation within a closed water circuit.
The system supports volumetric flow measurement, pressure monitoring, and weir experiments.
GRP construction, industrial piping, and integrated instrumentation make it suitable for comprehensive hydraulic studies.
The SCIENTICO FluidoSurgeX 103 Gravimetric Hydraulic Bench is designed for accurate flow measurement in fluid mechanics laboratories.
It uses a closed water circuit with a centrifugal pump and gravimetric measurement system.
Flow rates are determined using lever based weights or optional digital load cells.
An integrated flow channel supports weir experiments, while reinforced fiberglass construction ensures long term laboratory use.
The SCIENTICO FluidoSurgeX 102 Digital Hydraulic Bench is designed for fundamental fluid mechanics laboratory experiments.
It features a closed water circuit with a centrifugal pump, stepped measuring tank, and digital flowmeter.
The system supports accurate volumetric flow measurement using both manual and digital methods.
An integrated flume enables weir experiments, while GRP construction ensures reliable laboratory performance.
The SCIENTICO FluidoSurgeX 101 Hydraulic Bench Apparatus is a basic laboratory unit for fluid mechanics experiments.
It features a closed water circuit with storage tank, centrifugal pump, and stepped measuring tank.
The system enables accurate volumetric flow rate measurement using tanks and a measuring beaker.
An integrated flume supports weir experiments, while the GRP construction ensures long-term laboratory use.
Testimonials
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
“Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas a eros ullamcorper, euismod leo vitae, porta sapien. Phasellus eget massa rhoncus, porttitor nibh et, aliquet tortor. Vestibulum sit amet neque turpis.
Mrs. Lorem ipsum
Manager
“Lorem ipsum dolor sit amet, consectetur adipiscing elit. Maecenas a eros ullamcorper, euismod leo vitae, porta sapien. Phasellus eget massa rhoncus, porttitor nibh et, aliquet tortor. Vestibulum sit amet neque turpis.
Mrs. Lorem ipsum
Manager
Subscribe to our newsletter
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
