If you are planning a workshop for a technical college, polytechnic, ITI or TVET institute, the first question is not which brand to buy. It is which trades you will teach, and what each trade needs on the floor. We build technical training equipment at our works in Ambala, Haryana, and this page is a working guide for the team that has to write the list.
Equipment mentioned in this guide
Review the product information, specifications and model before requesting a quotation.

Indoor Solar Energy Training System | RVX 001
The Indoor Solar Energy Training System RVX-001 is a comprehensive solar power experimental platform designed to demonstrate the full cycle of solar energy utilisation, from photovoltaic generation through battery storage to load delivery. As a purpose-built solar energy trainer, the RVX-001 enables hands-on investigation of how solar PV modules transform solar power into usable electrical energy across a range of real-world conditions.
View product details
Wind Energy Training System | RVX-007
The Wind Energy Training System RVX-007 is a live demonstration wind power training platform that introduces the fundamental concepts of wind turbine operation, kinetic-to-mechanical energy conversion, and mechanical-to-electrical energy generation. It provides hands-on experience in wind turbine concepts and applications in a single integrated setup. Product Overview The Wind Energy Training System RVX-007 demonstrates the complete energy conversion chain of a wind turbine system. The platform covers no-load voltage measurement of the wind turbine, investigation of wind turbine velocity and output relationships, and independent wind energy AC output system operation. The setup includes an AC three-phase motor with AC motor driver simulating wind turbine drive, an AC to DC converter, MPPT charge controller for battery charging, and an off-grid inverter for AC output. Measurement capability includes voltage, current, and RPM. The system operates as a live wind power training demonstration unit covering both conceptual and applied aspects of wind turbine and generator operation.
View product details
Split AC System Trainer | PolarX – 552
The Split AC System Trainer PolarX - 552 demonstrates the design and operation of a commercial split system air conditioner used to heat, cool, and dehumidify spaces. This Split AC System Trainer illustrates the split principle using a dividing wall with a mounted air conditioner unit on its front and back panels.
View product details
Refrigeration Cycle Demonstration Unit | PolarX – 516
The Refrigeration Cycle Demonstration Unit PolarX - 516 consists of a hermetic compressor, condenser, evaporator, and expansion element built for investigating refrigeration circuit behavior. This refrigeration cycle demonstration unit uses finned tube heat exchangers for both the evaporator and condenser. Three capillary tubes of different lengths and a thermostatic expansion valve allow direct comparison of expansion elements.
View product details
PLC and HMI Advanced Training System | MX-07
The PLC and HMI Advanced Training System MX-07 is a hands-on trainer for industrial automation, PLC programming, and HMI operation. This PLC and HMI advanced training system is built around a Siemens SIMATIC S7-1500 PLC with CPU 1511-1 PN and a 10.1-inch MTP1000 Unified HMI.
View product details
Pneumatics Training System (Basic Level) | MX – 01
The Pneumatics Training System (Basic Level) MX - 01 is a hands-on training setup for learning pneumatic systems and control techniques. This Pneumatics Training System allows learners to assemble, disassemble, and troubleshoot pneumatic circuits using industry-standard components. It is built for practical, skills-based instruction in pneumatic technology.
View product detailsWhat technical training equipment includes
Technical education equipment is any trainer, model or test rig that lets a student practise a trade skill or prove a principle by hand. In our range it falls into a few families:
- Working trainers: a complete system, such as a PLC and HMI training system, that students wire, program and troubleshoot.
- Sectioned and cut-away models: engines, gearboxes and axles opened up so the parts can be seen.
- Test stands: rigs for hands-on measurement work, such as a wheel alignment stand.
- Component kits and panels: starters, transformer kits and digital logic trainers for connecting and testing.
How to choose technical training equipment by trade
Start from the trade, then the skills in the syllabus, then the equipment. Each trade below has its own page with more of the range.
Automobile and vehicle technology
Engine, transmission, brakes, steering and suspension are covered in our range by cut models and working trainers. See our automobile training equipment for TVET page.
Refrigeration and air conditioning
The range includes a refrigeration cycle demonstration unit and a split AC system trainer. Our HVAC and refrigeration training equipment page lists both.
Renewable energy
Solar PV, solar thermal, wind, fuel cell and biodiesel trainers are in the range, including indoor and outdoor solar systems. Start from the renewable energy training equipment page.
Mechatronics, PLC and automation
Pneumatics, hydraulics, PLC, HMI, sensors and process control are all in our mechatronics range. Our mechatronics and PLC automation equipment page groups them.
Electrical and electronics
Machines, transformers, starters, power electronics and digital logic are all in our electrical and electronics range. See electrical and electronics training equipment.
If you are still deciding which trades to fund, our guide to ITI lab equipment, trade by trade shows how the list changes from one trade to the next.
Featured technical training equipment
These are real products from our range, drawn from several trades. To get the datasheet and a model-specific quotation, send the model number through our contact page.
| Product | Model | Link |
|---|---|---|
| Indoor Solar Energy Training System | RVX 001 | View product page |
| Wind Energy Training System | RVX-007 | View product page |
| Split AC System Trainer | PolarX-552 | View product page |
| Refrigeration Cycle Demonstration Unit | PolarX-516 | View product page |
| PLC and HMI Advanced Training System | MX-07 | View product page |
| Pneumatics Training System (Basic Level) | MX-01 | View product page |
| Programmable Logic Control Trainer (Siemens Based) | NexuMation-52 | View product page |
| Level Control Trainer | Prozessi PX 16 | View product page |
| Pressure Control Trainer | Prozessi PX 17 | View product page |
| Multi Process Trainer | Prozessi PX 24 | View product page |
| Multi Variable Control Trainer | Prozessi PX 25 | View product page |
| Universal Process Control Trainer | Prozessi PX 29A | View product page |
| Study of I/P and P/I Converter | Prozessi PX 13 | View product page |
| Vehicle Transmission 5 Speed Manual Gearbox | Torquemaster-27 | View product page |
| Wheel Alignment Training Stand | SC-WAS 3010 | View product page |
| Star-Delta Starter for Three-Phase Machines Training Panel | SC-SDS 2069 | View product page |
| Three-Phase Transformer Training Kit | SC-TPT 2000 | View product page |
| Power Electronics Converter Trainer | EL 2036 | View product page |
| Digital Logic Trainer | SC-DLT 1102 | View product page |
How to write a BOQ request for a technical training equipment supplier
A clear bill of quantities cuts down back and forth. When you ask any technical training equipment supplier for a quotation, set the request out in this order:
- Trade and course: name the programme the workshop will serve.
- Item list: one line per product, with the model number if you have it.
- Quantity per item: count benches for the batch size you plan, not for one demonstration.
- Utilities on site: single or three-phase supply, compressed air, water and floor space.
- Documents needed: datasheet, manual and any form your tender requires.
- Destination: the city where the equipment will be installed.
For a worked method, read our BOQ procurement guide, and for planning the room itself use the TVET laboratory setup planning checklist.
Process control, civil and mechanical engineering labs
These products from our range cover three of them.
- Process control and instrumentation: Process Plant Trainer, ProzessiX PX-03, Level Measurement, Prozessi PX 30 (differential pressure and air purge methods), Non Linear Level Control, Prozessi PX 31, Flapper Nozzle System, Prozessi PX 23, Test Stand for Control Valves, Prozessi PX-32 (Kv and Kvs values) and Universal Process Control Trainer, Prozessi PX 29B. See also our process control trainer specifications page.
- Civil and structures: Two Hinged Arch Apparatus, FortiTestX-49, Three Hinged Arch Apparatus, FortiTestX 26 and Influence Line Apparatus, FortiTestX-47 (a three-span bridge model). Our civil engineering lab equipment list has more.
- Mechanical and thermal: Free and Forced Vibration Apparatus, Vibrano X 08, Radial Heat Conduction Module, ThermoFlux 7049/2, Concentric Tube Heat Exchanger, ThermoFlux 7108/2 (parallel and counter flow) and Boys Gas Calorimeter, ProzessiX PX-05. See the heat transfer lab equipment guide.
Why buy from the maker
We build this equipment at our own works in Ambala, so questions about a model or a datasheet go to the people who make the unit. Before the order, read our installation and commissioning guide.
Buying for a tender or a government institute
If your purchase goes through a formal tender, note that we do not publish prices; every order starts with a quotation. If your tender asks for proof that the maker authorises the bidder, see our page on the manufacturer authorisation form (MAF). If you are comparing sources more widely, our TVET lab equipment supplier page and the guide for polytechnics and TVET cover what to ask.
Frequently asked questions
What does technical training equipment mean?
It means the trainers, models and test rigs that students use to practise a trade. Our range covers automobile, refrigeration and air conditioning, renewable energy, mechatronics, process control, and electrical and electronics subjects. Ask us for the datasheet of the model you are considering.
Do you make this equipment yourselves?
Yes. We build lab and engineering training equipment at our own works in Ambala, Haryana, and the works is ISO 9001:2015 certified. That means you deal with the maker when you ask about a model, a datasheet or a quotation for the units on your list.
Can I see a price on the website?
No. We quote only on request. Send us the model and quantity you need through the contact page. We then send a quotation that matches your list, so you compare like with like instead of guessing from a listed figure.
Which trades do your TVET products cover?
The range includes automobile engineering, refrigeration and air conditioning, renewable energy, automation and control, mechatronics, and electrical and electronics. Examples include a split AC system trainer, a PLC and HMI advanced training system, a wheel alignment training stand and solar and wind energy training systems.
What should I send to get a datasheet and quote?
Send the model numbers you want, the quantity of each, the city of delivery, whether the order is for a tender, and the type of institute. A short list is enough to begin. We can then reply with the datasheet and a model-specific quotation for those items.
Can you help if my tender needs a manufacturer authorisation form?
Our site has a page that explains the manufacturer authorisation form for lab equipment tenders. Read it first, then tell us on the contact page that your order is for a tender, so we can discuss what your documents require for the models you have chosen.
Send us your list
When you are ready, go to our contact page and send four things: the models and quantities you want, the destination city, whether the purchase is for a tender, and the type of institute (college, polytechnic, ITI or TVET centre). We will reply with the datasheets and a quotation for your list.
One honest ask
This article and public product information are available to browse without an account. To open a product datasheet, complete the contact form shown with its download link. If this article was useful, leave your email and two things happen: we send you this page as a plain-text block you can paste into a tender file or an internal email, and we notify you the next time we publish a buyer tool like this one. Nothing else. No drip sequence, no sales calls booked without asking.